What is SmartyCam HD?
SmartyCam D is a video recorder
developed for motorsports envi-
ronments. SmartyCam D
automatically overlays graphical
indications of the vehicle data to an
D video.
Its components have been speci-
cally designed to meet the
demands of the extremes of
motorsports environments:
specialty lenses, CMOS sensor, relia-
bility under vibrations, connectivity
to the vehicle data, and capability
to start and stop video recording
automatically are among the
features customized for our sport.
Which data does it show?
Data shown in overlay come from
your vehicle ECU, from the internal
accelerometers, from GPS and from
datalogger analog/digital inputs.
It is also possible to display the map
of the track and personal images
(i.e. logos).
Is it possible to congure the gra-
phical overlays?
You can choose from a wide library
of graphical overlays and set the
position of each of them.
End of scales and measure units can
also be easily dened using the
SmartyManager software included
in the kit.
To which AiM systems can
SmartyCam HD be connected?
It is possible to connect SmartyCam
D, through CAN network, to all the
AiM Loggers, that is to say, to MXL,
EVO, MyChron, SoloDL and ECU
Bridge.
Does it work in a stand alone
mode?
Yes, SmartyCam D has an internal
battery and can work also without
being connected to the AiM CAN
network.
Of course, in this case, only lateral
acceleration coming from Smarty-
04
CHAPTER 1
SMARTYCAM HD MANUALE ENG _Layout 1 24/07/13 20.40 Pa ina 5
