Air Techniques Acclaim USB User manual

Printed copies of this document are considered uncontrolled. 1
5240.4.Rev001 02.02.2017
Acclaim USB Camera Installation
Required materials:
Required Eaglesoft
modules:
Install on the following computers:
• A/T Acclaim drivers CD
• A/T Acclaim camera and
control box
• USB cable
• Power cable
• Game port cable
• Video Capture
• Any operatory workstation using the
Acclaim
NOTE: The Air Techniques Acclaim Camera is only supported on Windows 2000 and
Windows XP Professional with Patterson Eaglesoft software.
NOTE: The Air Techniques Acclaim Camera is only supported on USB 2.0. NOTE: DIRECT X
version 9.0 has to be loaded for Windows.
**WINDOWS XP INSTRUCTIONS** (Windows 2000 begins with step 20)
1. Insert the A/T Acclaim Drivers CD into the CDROM.
2. Click Exit.
3. Attach the camera to the control box with the camera cable.
4. Plug the power supply for the camera into the control box and then into the outlet.
5. Connect the USB cable to the control box then plug into the USB port on the
computer. The Add New Hardware Wizard will appear.

Printed copies of this document are considered uncontrolled. 2
5240.4.Rev001 02.02.2017
6. Mark the option Install the software automatically (recommended). Click Next.
7. If the Logo Testing message should appear, click Continue Anyway to complete the
installation.

Printed copies of this document are considered uncontrolled. 3
5240.4.Rev001 02.02.2017
8. Click Finish (to close the Add New Hardware Wizard).
9. Verify the driver has been loaded correctly through Device Manager. To access Device
Manager, go to:
•Start | Settings | Control Panel. Double-click on the System icon.
•Choose the Hardware tab.
•Click on the Device Manager button.
A/T SLC USB Camera will appear under Imaging Device.

Printed copies of this document are considered uncontrolled. 4
5240.4.Rev001 02.02.2017
10.To activate the buttons on the Acclaim hand piece, connect the serial game port cable to
the back of the camera control box (port labeled PC) and then to the game port on the
computer.
11.Go to Start | Settings | Control Panel. Double-click on the Gaming Options icon.
12.Click Add.
13.Highlight the option for 2-axis, 2-button joystick. Click OK.

Printed copies of this document are considered uncontrolled. 5
5240.4.Rev001 02.02.2017
14.You should now have a listing for 2-axis, 2-button joystick with a status of OK.
15.To test the buttons on the camera, highlight the joystick listing and click Properties.
16.Press and release the top button on the camera. The red indicator to the left should
illuminate.

Printed copies of this document are considered uncontrolled. 6
5240.4.Rev001 02.02.2017
17.Press and release the bottom button on the camera. The red indicator to the right
should illuminate.
18.Click OK (to exit Gaming Options).

Printed copies of this document are considered uncontrolled. 7
5240.4.Rev001 02.02.2017
**WINDOWS 2000 INSTRUCTIONS**
1. Insert the A/T Acclaim Drivers CD into the CDROM.
2. Click Exit.
3. Attach the camera to the control box with the camera cable.
4. Plug the power supply for the camera into the control box and then into the outlet.
5. Connect the USB cable to the control box then plug into the USB port on the
computer. The Add New Hardware Wizard will appear.
6. Click Next.

Printed copies of this document are considered uncontrolled. 8
5240.4.Rev001 02.02.2017
7. Mark the option Search for a suitable driver for my device (recommended). Click Next.
8. Check the box for CD-ROM drives. Click Next.

Printed copies of this document are considered uncontrolled. 9
5240.4.Rev001 02.02.2017
9. The wizard should find the device under ?\device drivers\at slc usb camera.inf. Click
Next.
10.If the Digital Signature message should appear, click Yes (to complete the installation).
11.If the Digital Signature message should appear, click Yes to complete the installation.
12.Click Finish (to close the Add New Hardware Wizard).

Printed copies of this document are considered uncontrolled. 10
5240.4.Rev001 02.02.2017
13.Verify the driver has been loaded correctly through Device Manager. To access Device
Manager, go to:
•Start | Settings | Control Panel. Double-click on the System icon.
•Choose the Hardware tab.
•Click on the Device Manager button.
A/T SLC USB Camera will appear under Imaging Device.
14.To activate the buttons on the Acclaim hand piece, connect the serial game port cable to
the back of the camera control box (port labeled PC) and then to the game port on the
computer.
15.Go to Start | Settings | Control Panel. Double-click on the Gaming Options icon.
16.Click Add.