Aircare MA1201 User manual

Read and save these instructions
CONSOLE
Everything you need to know about your
ALL MA1201 MODELS 1B73362
8/2020

1

a. Top (fan assembly)
b. Base
#830484
c. MAF1 Super Wick®
ALL MAF1 WICKS
d. Float
#829816
e. Float support and one screw (installed in base)
SUPPORT #830496 | SCREW #829815
f. Water bottle
#830537
g. Water fill cap
#824690
h. Spring valve cap
#1B73170
i. Demineralization cartridge
#AU5003PK
j. Four casters
#829812
k. Owner’s manual
#1B73362
Remove the Console from its packaging.
You should have:
1
a
e
b
c
f
g
h
j
k
i
d
Prefer to see a video?
Watch the Console set-up at
aircareproducts.com/support.
SCAN THE CODE TO THE RIGHT
WITH YOUR PHONE’S CAMERA
If you are missing any parts, or need
replacement parts, call us at 800.547.3888 or
visit our website aircareproducts.com.
♥We hope you love your Mini-Console. 
LET’S GET YOU UP AND RUNNING
2

Turn the base upright and install your
wick. Wrap the wick through the base
guides in a circle so the wick’s ends meet. Put
the top on the base.
Put your Console in the most centrally-
located room of your home. It should
be on a level surface against an interior wall.
Make sure it’s at least two inches from the wall
so the humidistat (on the cord) can accurately
read your humidity.
Remove the top, water bottle, and all of
the loose items from the base. Turn the
base over and insert the casters snugly into the
bottom. Just use your hands! Using tools can
crack the cabinet.
3
4
2
More about positioning:
• To maximize humidity circulation, put your unit near a cold air
return.
• If you prefer to put your unit in the room where humidity is
most needed, you can! But the humidity won’t circulate as
well with this method.
• Don’t put your humidifier under a window, as condensation may occur.
• Put the unit on the bottom floor of a multi-story home.

Unscrew the spring valve cap from the
water bottle. Take the demineralization
cartridge from the parts bag and screw it into
the the cap. Put the cap back on the bottle.
Remove the larger water bottle fill cap.
Put the water bottle flat on a counter
and slide the opening under a faucet. Fill the
water bottle, then put the cap back on. Tighten
the cap with your hands, making sure the cap
is correctly threaded.
Put the water bottle in the base and let
the bottle drain completely. Make sure
the plunger in the cap connects with the post in
the base.
Remove the bottle and refill it. Put the bottle back
into the base. Filled twice like this, your Console
holds 3.6 gallons of water.
Wait 20 minutes for the wick to become
fully saturated, then proceed to step 9.
5
6
7
8
About water additives:
• Do not use essential oils in your Console.
• Do not use water softeners.
• We recommend our Essick Air Bacteriostat to help inhibit
mold growth.
4

Press the humidity control button to
set your humidity level from 25% to 65%.
The humidistat on your cord will read your home’s
humidity and turn your fan o when the set level
is reached. When set to 65%, your unit will run
continuously.
That’s it! Your Console is ready to use.
Plug in your unit and press the power
button .
Set your desired fan speed by pressing
the fan button . Your Console has
three fan speeds that are displayed by F1 (the
lowest speed) through F4 (the highest speed).
The additional AUTO setting (displayed by an A)
allows the fan speed to adjust automatically to
your humidity setting.
9
10
11
Note: On higher speeds, the Console puts out a tremendous
amount of humidity, so it’s louder on these levels. Most of our
customers liken it to the sound of a box fan. Rest assured there is
nothing wrong with your unit, it’s just working very hard to put out
much-needed humidity.
F– The F code means your unit is empty and needs to be FILLED with water.
CL – Your CONTROLS ARE LOCKED on the current setting. Activate the control lock by holding the power button for five seconds, until
CL appears. Your Console will lock on the current fan and humidity settings. Release the lock by pressing the power button again for five
seconds until the display flashes CL twice, letting you know the lock is o.
CF – The CF code triggers after 720 hours of use and means it’s time to CHECK YOUR FILTER (wick). Unplug your unit and check your
wick. If your wick is still in good shape, simply clear the code by plugging your humidifier back in. If your wick needs replacing, install a new
MAF1 Super Wick®:
ABOUT THE CODES
5

ABOUT THE CODES
Regular cleaning is important for preventing mold,
mildew, and other bacterial growth in your humidifier.
It also keeps your Console working its best.
1. Let the unit run until it’s empty, then turn it o and
unplug it.
2. Remove the water bottle and the top from the base.
3. Throw your wick away if it is time to replace it.
Otherwise, remove it from the base and put the wick in
a sink while you finish cleaning your Console.
4. Pour out any remaining water from the base and bottle.
5. Clean the base and bottle by filling each half-full with
water. Add 1 cup of white vinegar to each. Let these sit
for 20 minutes. To disinfect, replace the vinegar with 1
teaspoon of bleach in each. Do not mix vinegar and
bleach.
6. After 20 minutes, empty the base and bottle.
7. Dampen a sponge with white vinegar and wipe down
the base. Rinse it thoroughly. To disinfect, replace the
vinegar with bleach.
8. Wipe everything dry. Replace your wick or install a new
one, then reassemble the unit.
When storing your Console, discard the used wick and disinfect
the unit using the directions above. Dry the unit thoroughly, and
store in a temperature-regulated area. Do not install a new wick
until you are ready to use your humidifier again.
HOW TO CLEAN YOUR CONSOLE
6

Où se trouve mon numéro
de série?
Pourquoi mon unité ne
fonctionne-t-elle pas?
Pourquoi l’écran clignote-t-il en
achant « 20 »?
À quelle fréquence dois-je
remplacer ma mèche?
Puis-je commander des pièces
de rechange?
Pourquoi l’écran clignote-t-il en
achant « -- »?
Pourquoi mon taux d’humidité
n’augmente-t-il pas?
Votre numéro de série se trouve sur l’autocollant au dos de votre
ventilateur. Vous pouvez l’écrire ici pour référence future :
__________
Votre niveau d’humidité est inférieur à 20 %. Essayez d’augmenter
la vitesse de votre ventilateur et le niveau de sortie.
La teneur en minéraux de votre eau détermine la fréquence
à laquelle votre mèche doit être remplacée. Une eau plus
dure implique des changements plus fréquents. L’utilisation
de notre bactériostat (pièce #1970) peut vous aider à garder
votre appareil plus propre et à prolonger la durée de vie de
votre mèche. Changez toujours votre mèche au début de
chaque saison.
Oui! Les pièces de rechange Mini-Console et leurs
références sont indiquées à la page 10.
Votre niveau d’humidité est supérieur à 90 %. Essayez de
réduire la vitesse du ventilateur et le niveau de sortie.
Il faut parfois 2 à 3 jours pour que votre nouvel
humidificateur d’air fasse monter le taux d’humidité, surtout
s’il fait très sec dans votre maison.
Si votre mèche est vieille, remplacez-la par une nouvelle.
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
R
• Vérifiez votre bouteille d’eau. ( VOIR ÉTAPE 7)
• Votre unité a atteint le niveau d’humidité que vous avez fixé.
[e-mail] aircareproducts.com 800.547.3888
CONSOLE
TOUS LES MODÈLES MA1201
Tout ce que vous devez savoir sur votre
Lisez et conservez ces instructions
FOIRE AUX QUESTION
Pour toute autre problème, contactez nos experts en humidification!
Ils sont prêts à vous aider par téléphone, courriel ou chat.

CONSOLE
TOUS LES MODÈLES MA1201 1B73362
8/2020
Tout ce que vous devez savoir sur votre
Lisez et conservez ces instructions

9