Aircare SPACE SAVER 836000HB User manual

Read and save these instructions
SPACE SAVER
Everything you need to know about your
ALL 831000 AND 836000HB MODELS 1B73378
8/2020

If your unit has a digital conrol panel with buttons, you
have the Space Saver 831000. Remove the Space Saver
from its packaging. In this box, you should have:
a. Cabinet
#4V3395020VWH
b. Fan assembly
#1B72810-R
c. 1043 Super Wick®
All 1043 WICKS
d. Wick frame
#4V3398020GRYP
e. Float
#1B5060400
f. Float rod
#1B72125
g. Float rod retainer
#1B5460590
h. Four casters
#1B5460070
i. Owner’s manual
#1B73378
1
a
d
c
eg
h
i
b
f
LET’S GET YOUR 831000 UP AND RUNNING
Prefer to see a video?
Watch the Space Saver set-up at
aircareproducts.com/support.
SCAN THE CODE TO THE RIGHT
WITH YOUR PHONE’S CAMERA
If you are missing any parts, or need
replacement parts, call us at 800.547.3888 or
visit our website aircareproducts.com.
♥We hope you love your Space Saver. 
A
1 2

Remove everything from the cabinet.
Do not throw away the small
Styrofoam cube – this is your float. Turn the
cabinet over and insert the casters snugly into
the bottom. Just use your hands! Using tools
can crack the cabinet.
Turn the cabinet upright. Locate the
PLACE WICK HERE label inside your
Space Saver cabinet. Remove the tape from your
wick frame and place the wick and wick frame in
the cabinet with the side labeled FRONT facing
the front, curved side of the unit.
Place the float (with the float rod as
pictured) in the square area in the
bottom of the cabinet. Secure the rod to the
humidifier with the float retainer, as shown.
Put the fan assembly on the base.
Make sure the top of the float rod
makes a solid connection with the fan switch
inside the fan assembly. The fan switch looks
like a small, silver diving board.
2
3
4
5
FLOAT RETAINER
If your unit has an analog control with a knob, you have
the Space Saver 836000HB. Remove the Space Saver
from its packaging. In this box, you should have:
a. Cabinet
#4V3395020VWH
b. Fan assembly
#1B73184-R
c. 1043 Super Wick®
All 1043 WICKS
d. Wick frame
#4V3398020GRYP
e. Float
#1B5060400
f. Float rod
#1B72125
g. Float rod retainer
#1B5460590
h. Four casters
#1B5460070
i. Owner’s manual
#1B73379
1
a
b
c
d
f
g
h
i
e
LET’S GET YOUR 836000HB UP AND RUNNING
Prefer to see a video?
Watch the Space Saver set-up at
aircareproducts.com/support.
SCAN THE CODE TO THE RIGHT
WITH YOUR PHONE’S CAMERA
If you are missing any parts, or need
replacement parts, call us at 800.547.3888 or
visit our website aircareproducts.com.
♥We hope you love your Space Saver. 
B
3 4

Wait 20 minutes for the wick to become
fully saturated, then proceed to step 9.
Put your Space Saver in the most
centrally-located room of your home. It
should be on a level surface against an interior
wall. Make sure it’s at least two inches from
the wall so the humidistat (on the cord) can
accurately read your humidity.
To fill your digital Space Saver, remove
the louver from the front grille. Fill the
cabinet with water up to the FILL HERE
line marked inside the cabinet. Only pour water
through the front grille and never through the
fan. Your Space Saver holds 6 gallons of water.
Proceed to step 8 on the next page.
6
8
More about positioning:
• To maximize humidity circulation, put your unit near a cold air return.
• If you prefer to put your unit in the room where humidity is most
needed, you can! But the humidity won’t circulate as well with this
method.
• Don’t put your humidifier under a window, as condensation may occur.
• Put the unit on the bottom floor of a multi-story home.
To fill your analog Space Saver, fill
the cabinet with water up to the FILL
HERE line marked inside the cabinet. Only
pour water through the lower front grille
and never through the fan. Your Space Saver
holds 6 gallons of water.
About water additives:
• Do not use essential oils in your Space Saver.
• Do not use water softeners.
• We recommend our Essick Air Bacteriostat to help inhibit
mold growth.
About water additives:
• Do not use essential oils in your Space Saver.
• Do not use water softeners.
• We recommend our Essick Air Bacteriostat to help inhibit
mold growth.
2 INCHES
2 INCHES
Space Saver
831000
with digital controls
Space Saver
836000HB
with analog controls
7A
7B
5 6

Plug in your unit and press the power
button .
Set your desired fan speed by pressing
the fan button . Your Space Saver has
three fan speeds that are displayed by F1 (the lowest
speed) through F3 (the highest speed).
Press the humidity control button
to set your humidity level from 25% to
65%. The humidistat on your cord will read your
home’s humidity and turn your fan o when the
set level is reached. When set to 65%, your unit
will run continuously.
Note: On higher speeds, the Space Saver puts out a tremendous amount
of humidity, so it’s louder on these levels. Most of our customers liken it to
the sound of a box fan. Rest assured there is nothing wrong with your unit,
it’s just working very hard to put out much-needed humidity.
9A
9A10A
10A
11A
11A
Set your desired fan speed by turning
the power knob. Your Space Saver has
three fan speeds that are displayed by F1 (the
lowest speed) through F3 (the highest speed).
10B
11B
10B
9BPlug in your unit and press the
power knob.
Turn the humidity control knob to set
your humidity level from 25% to 65%.
The humidistat on your cord will read your
home’s humidity and turn your fan o when
the set level is reached. When set to 65%, your
unit will run continuously.
That’s it! Your Space Saver is ready to use.
Note: On higher speeds, the Space Saver puts out a tremendous
amount of humidity, so it’s louder on these levels. Most of our customers
liken it to the sound of a box fan. Rest assured there is nothing wrong with
your unit, it’s just working very hard to put out much-needed humidity.
9B
11B
STARTING YOUR
DIGITAL SPACE SAVER 831000
STARTING YOUR
ANALOG SPACE SAVER 836000HB
8