AirLive BU-3028 User manual

BU-3028/BU-3028-IVS
Bullet Network Camera
Quick Installation Guide

Support
You can download the complete guides
and supporting programs from
<http://www.airlivesecurity.com/prod
uct/bu-3028/download >, or scan the
QR code here.
Please consult with the FAQs
<http://www.airlivesecurity.com/prod
uct/bu-3028/faq> before writing to
OvisLink Tech Support Team for further
assistance
For any other question, please read the user manual in
the CD or mail to [email protected] for technical
support.
You can download the complete guides
and supporting programs from
<http://www.airlivesecurity.com/prod
uct/bu-3028-ivs/download >, or scan
the QR code here.
Please consult with the FAQs
<http://www.airlivesecurity.com/prod
uct/bu-3028-ivs/faq> before writing to
OvisLink Tech Support Team for further
assistance
BU-3028
BU-3028-IVS

BU-3028/BU-3028-IVS Package Contents
Please check the package contents and contact
your distributor if any part is missing.
BU-3028/BU-3028-IVS DesiccantDrill Template
Quick
Installation
Guide
User
Manual
CD
Screw Pack 12V/1A
Power
Adaptor
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
Quick Installation Guide
AirLive Product
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause
Manufacturer/Importer
Description
OvisLink Corp.
5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist.,
New Taipei City 231, Taiwan
■
■
■
■CE marking
Signature：
Name：Albert Yeh
Position/ Title : Vice President Date：20XX/XX/XX
t Yeh
XXXXXXXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXXXXXXXv
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurement
Information technology equipment - Immunity characteristics -
Limits and methods of measurement
Information technology equipment - Safety -- Part 1: General
requirements
Place : Taiwan
VER.20XX.XX.XX
Quick Installation Guide
AirLive Product
T
h
e
T
o
t
a
l
N
e
t
w
o
r
k
i
n
g
S
o
l
u
t
i
o
n
s
Canopy

I/O Interface
DC Audio
Output
Audio
Input
Alarm
Digital I/O
RJ45
PoE

Before Using the Camera
Important: Please insert an empty MicroSD
card to prevent from any data lost. Capacity of
32/64GB and Class10 is recommended.
Please remove the 3 screws and the rear cover
to insert the MicroSD card. The Reset button is
near MicroSD card slot.
01
MicroSD
64GB/
Class10
64GB

Put the "Waterproof caps" on the screw holes.
Waterproof caps
Waterproof the Rear Cover
02

Assemble the canopy on the camera.
Canopy
03

Connect SP-100E to the camera for surge
protection.
Surge Protection
04
PoE Switch
DATA + Power
PoE Port
GND
SP-100E

Use the drill template to mount the camera on
the wall with screws.
Mount the Camera
05
Wall

Connect the 12V1A adaptor or connect the
camera to a PoE switch to power on the camera.
If you need 2-way audio function, please attach
a speaker and micphone to the audio ports.
Power on the Camera
06
12V1A adaptor PoE Switch
Or
Speaker
Micphone

Please use the tube for waterproofing the
connectors and the cables.
Waterproof the Cable
07
Tube
Covered with Tape

a. Connect the camera to the LAN/PoE port of
the switch/PoE switch.
b. Connect the desktop/ laptop to the LAN port
of the switch/PoE switch.
c. Connect the switch/PoE switch to the LAN
port of the router.
Connect the Camera to the Network
08
Camera
Switch
PC/NB Router
7531
8642
8-port POE + 2 Combo Gigabit 802.3at
Device Guard Web Smart Switch
POE-FSH1008AT
7531
8642
G2
LNK
LNK
PoE
LNK/ACT
PoE
LNK/ACTPWRRST
G1 G1 G2

The default IP address of camera is
192.168.1.100. The camera will get IP address
automatically, if it connects to a modem/router
by DHCP function or you can assign a static IP
for the camera.
Please make sure the UPnP function is
enabled. For most home use routers, UPnP is
enabled already.
Set up the Network Environment
09
Camera
Switch DHCP
PC/NB Router
7531
8642
8-port POE + 2 Combo Gigabit 802.3at
Device Guard Web Smart Switch
POE-FSH1008AT
7531
8642
G2
LNK
LNK
PoE
LNK/ACT
PoE
LNK/ACTPWRRST
G1 G1 G2
192.168.1.100
192.168.1.254192.168.1.101
ra.

Please use the CD to install IP Wizard.
Install the Airlive IP Wizard
10
VER.201XXXXX
XXXXXXXXXX XXXXX XXXX XXXX
AirLive Product
T
h
e
T
o
t
a
l
N
e
t
w
o
r
k
i
n
g
S
o
l
u
t
i
o
n
s

IP Wizard starts to scan camera automatically.
Click the camera you want to log in.
Important: Please make sure your
desktop/laptop is in the same network segment
with the camera, or your desktop/laptop cannot
connect to the camera in the network.
Find Camera on the Network
11

Please use IE to log in the camera. The default
username and password is admin/airlive.
You need to install the ActiveX on your PC
when you first access to the camera web UI.
Access Camera on Web UI
12

When the live view appears,you can adjsut the
view angle of the camera.
Adjust the view angle
13

You can also adjsut more detail settings in the
camera web UI by IE/Chrome/Firefox. Chrome
and Firefox require QuickTime to display the
live view.
For any other question, please read the user
manual in the CD or mail to the
[email protected] for technical
support.
More Settings on Camera Web UI
14

Download the CamPro Mobile
15
Please visit App Store or Google Play to
download CamPro Mobile. You can use QR
code scanner software directly or simply search
the “AirLive CamPro Mobile"
App Store Google Play

Click the “CamPro Mobile” icon on your device.
Start the CamPro Mobile
16
Press "Setup"