AirLive CU-720IR User manual

CU-720IR
Passive PoE Network Camera
Quick Installation Guide

Support
You can download the
complete guides and
supporting programs from
<http://www.airlivesecurity.c
om/product/cu-720ir/docum
ent>, or scan the QR code
here.
Please consult with the FAQs
<http://www.airlivesecurity.c
om/product/cu-720ir/faq>
before writing to OvisLink
Tech Support Team for further
assistance
For any other question, please read the user
manual in the CD or mail to [email protected]
for technical support.

CU-720IR Package Contents
Please check the package contents and contact
your distributor if any part is missing.
CU-720IR 12V/1A
Power Adaptor
POE-1P,
Passive
PoE Injector
User
Manual
CD
Quick
Installation
Guide
Quick
Start
Guide
Stand
with Screws
RJ45
Port
12V Passive PoE
DC Injector Included
Passive PoE Installation Guide
This device uses 12V passive PoE. It is not compatible with 802.3af or
802.3at PoE switch. Please do not connect this device to PoE switch, or
the device might be damaged.
Please use Cat.5E or better Ethernet cable for the PoE.
The cable distance should not exceed 30 meter
English
EN
Deutsch
DE
Installationsanleitung für passives PoE
Dieses Gerät nutzt passives PoE mit 12 Volt. Es ist NICHT kompatibel mit
802.3af oder 802.3at Switchen! Bitte verbinden sie es niemals mit einem
solchen PoE Switch, andernfalls könnten die Geräte beschädigt werden.
Bitte nutzen Sie ein Ethernetkabel der Kat.5E oder höherwertig für PoE
Die maximale Kabellänge darf 30 Meter nicht überschreiten
Ελληνικός
GR
CU-720IR
Note:
This device uses 12V passive PoE. It
is not compatible with 802.3af or
802.3at PoE switch. Please do not
connect this device to PoE switch, or
the device might be damaged.
Declaration of Conformity
We, Manufacturer/Importer
Declare that the product
720P Day/Night Wireless IPCAM
AirLive CW-720IR, CU-720IR
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause Description
OvisLink Corp.
5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist.,
New Taipei City 231, Taiwan
■
■
■
■
■CE marking
EN 300 328 V1.8.1
EN 301 489-1 V1.9.2:2011
EN 301 489-17 V2.2.1:2012-2009
EN 55022: 2010 (Class B)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz ISM band and using wide band modulation
techniques; Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility(EMC) standard for radio equipment
and services; Part 1: Common technical requirements
Electromagnetic compatibility(EMC) standard for radio equipment And
Part 17：Specific conditions for Wideband data and HIPERLAN equip
m
■EN 55024: 2010 Information technology equipment - Immunity characteristics -
Limits and methods of measurement
■EN 60950-1:2006+ A11:2009+
A1:2010 A12:2011+A2:2013
Information technology equipment - Safety -- Part 1: General
requirements
Information technology equipment - Radio disturbance characteristics
-
Limits and methods of measurement
CU-720IR
720P Day/Nigh
t
or
POE
Power
Over
Ethernet
DC
LAN

I/O Interface
RJ45 /
Passive PoE
Reset Button
IR LED
Microphone
12V / 1A
DC-in
3.5mm
Audio
output
MicroSD Card Slot

Before Using the Camera
Important: Please insert an empty MicroSD
card to prevent from any data lost. Capacity of
32/64GB and Class 10 is recommended.
MicroSD
64GB/
Class10
64GB
01

Attach the camera with the stand and place the
camera on the table or fix it onto the ceiling or
wall with screws.
Mount the Camera
02

If you need 2-way audio function, please attach
a speaker to the audio port.
Speaker
3.5mm
Audio Cable
Connect the 12V1A adaptor to power up the
camera.
12V / 1A
Power up the Camera
03

Or you can choose the PoE-1P to supply the
power.
Using the Passive PoE
04
Please use the 12V/1A adaptor and DO NOT
connect the camera to any other standard
PoE switch (48V) to prevent from any
damage caused.
Passive
PoE
Power Adaptor
12V/1A
Router
POE
Power
Over
Ethernet
DC
LAN
PoE Out
POE
Power
Over
Ethernet
DC
LAN
POE-1P
CU-720IR

Please make sure the UPnP function is
enabled. For most home use routers, UPnP is
enabled already.
Before you viewing the camera, please make
sure CU-720IR and mobile device are at same
WLAN.
Wireless Local LAN
05
AirLive inYour Life!
AirLive in Your Life!
Mobile
Devices
CU-720IR

Please visit App Store or Google Play to
download CamPro Mobile. You can use QR
code scanner software directly or simply search
the “AirLive CamPro Mobile"
App Store Google Play
Download the CamPro Mobile
06

Start the CamPro Mobile
07
Click the “CamPro Mobile” icon on your device.
Press "Setup"

Search and Add the Camera
08
Press "Add" to start to search camera.

Search and Add the Camera
09
Press "Auto Search"

Slide the list and select the camera of which
you want to view
Search and Add the Camera
10
CU-720IR

Search and Add the Camera
11
Edit the information and User Name/Password.
And click “Save”. Default User Name/Password
is admin/airlive
CU-720IR

Rename the Camera
12
For easy memory, you can rename the camera.
For example, you can name this camera by
"Babys Room".
Babys Room
CU-720IR

Camea Live View
13
Press "Back" to 4-channel live viewing.
Babys Room

You can select any channel to enlarge the video
or 4-channel view by tapping the screen.
Camera Live View
14

Once you have the camera view, you need to
adjust the camera to the desired viewing angle.
Also you need to adjust the focus ring to have
the clearest view.
Adjust the view angle and focus
15

Now you can do free voice communication.
Please switch to single channel and enable the
audio function.
Transmit Audio from
Device to Camera
Transmit Audio from
Camera to Device
Two-Way Audio
16