AIRONN AIR-AU Series User manual

AIR-AU SERIES
LOBBY TYPE
AXIAL FAN SERIES
FOR ROOFS
USER MANUAL

www.aironn.com.tr
CONTENTS
FIGURES LIST ................................................................................................3
TABLES LIST ..................................................................................................3
COMPANY INFORMATION ...........................................................................4
GUARANTEE And SERVICE ...........................................................................5
GUARANTEE TERMS .....................................................................................6
SPECIAL WARRANTY CONDITIONS ...............................................................8
USER RESPONSIBILITIES AND WARRANTY ...................................................9
PRODUCT KNOWLEDGE .............................................................................10
PRODUCT DESCRIPTION .........................................................................10
AIRONN AIR-AU SERIES FAN LABEL ........................................................12
AREA OF USE ..........................................................................................13
PACKAGING CONTENT ...........................................................................13
ABOUT THE MACHINE GENERAL NOTES ................................................14
ABBREVIATIONS .....................................................................................15
OVERALL DIMENSIONS ..........................................................................16
GENERAL SECURITY INSTRUCTIONS ...........................................................17
ON THE MACHINE STIMULANT LABELS .................................................17
HANDLING AND TRANSPORT DURING ...................................................18
DURING INSTALLATION AND PLACEMENT ............................................22
OPERATION DURING ..............................................................................23
CARE DURING ........................................................................................24
Scrapped SEPARATION DURING ............................................................26
PRODUCT STORAGE ...................................................................................27
AIR –AU-SERIES Page 1

www.aironn.com.tr
ASSEMBLY INSTRUCTIONS .........................................................................29
AXIAL HOUSING ROOF TYPE FAN INSTALLATION ..................................29
ELECTRIC CONNECTION INSTRUCTIONS ....................................................31
ELECTRIC CONNECTION DIAGRAM ........................................................34
PRODUCT USE ............................................................................................35
1-MANUAL USE ......................................................................................35
2-AUTOMATION WITH USE ....................................................................35
MAINTENANCE INFORMATION .................................................................36
PERIODIC MAINTENANCE DONE ............................................................36
POSSIBLE FAULTS AND REMEDY ............................................................38
WARRANTY CERTIFICATE ...........................................................................40
AIR –AU-SERIES Page 2

www.aironn.com.tr
LIST OF FIGURES
NO FIGURE DESCRIPTION PAGE
NO
1Shape - 1 Axial Swing Roof Type Fresh Air Fan Series 10
2Shape - 2 Axial Backplane Roof Type Fresh Air Fan Series Tag 11
Example
3Shape - 3 Axial Backplane Roof Type Fresh Air Fan Series General 16
Dimensions
4Shape - 4 Stimulus on the machine tags 17
5Shape - 5 Axial Backplane Roof Type Fresh Air Fan Connection Type 30
6Shape - 6 ∆ Connection 33
7Shape - 7 Y-Link 33
8Shape - 8 Y/∆ Link 33
9Shape - 9 Double Speed Dahlender Wound Motor For Terminal 33
Connection Diagram
LIST OF TABLES
NO TABLE DESCRIPTION PAGE
NO
1Table –1 Electricity according to engine power connection table
33
2Table –2 Possible mechanical failures And removal 38
3Table –3 Possible electrical faults And removal 39
AIR –AU-SERIES Page 3

www.aironn.com.tr
AIR- A U S E R I E S
Page 4
COMPANY INFO
AIRONN HAVALANDIRMA VE KLİMA SİSTEMLERİ SAN. DIŞ TİC. LTD. ŞTİ
HEAD OFFICE
FACTORY
: ÇAMLIK MAH. SENOL GÜNEŞ BULVARI NO: 28/A
ÜMRANİYE/İSTANBUL
: KARATEPE MAH. CUMHURIYET CAD. MERA SOK. N0:13
KARTEPE/KOCAELİ
TEL / FAX
: [phone] / [phone]
WEB
: www.aironn.com.tr
MAIL
: [email protected].tr / [e-mail]

www.aironn.com.tr
WARRANTY and SERVICE
We kindly ask you to follow the recommendations below;
1. When you purchase your product, it is necessary to have the
Warranty Certificate approved by your Authorized Dealer. don't
forget.
2. Follow the instructions in the user manual while using your product.
This warranty given by AIRONN Ventilation does not cover the
elimination of malfunctions caused by using the product other than
the instructions specified in the user manual. In addition, the
following situations are not covered by the warranty. are held:
1. Damage caused during transportation, loading and unloading
after the delivery of the product to the customer, and
malfunctions,
2. Fire, earthquake, lightning strike, etc. damage caused by
natural disasters such as malfunctions,
3. Incorrect electrical installation, undervoltage or excess,
damage to occur if the product is used at a voltage different
from the voltage on the label, and malfunctions,
4. Damage caused by user errors and malfunctions.
3. Elimination of the above-mentioned damages and malfunctions is
done by determining a fee according to the size of the damage and
malfunction. The transportation of the product and its assembly to
the place where it will be used are excluded from the product price.
4. The responsibility of giving this warranty certificate to the customer
after approval is on the seller, dealer, agency or representatives from
whom the consumer purchased the product.
5. Since the invoice date will be taken as a basis in case of any dispute
during the warranty period of the product, the user should keep the
invoice or a legible photocopy of the product together with the
Warranty Certificate.
6. In the event that the Warranty Certificate of the product is changed,
the original serial number on the product is removed or changed, the
Warranty Certificate of the product is invalid.
AIR –AU-SERIES Page 5

www.aironn.com.tr
WARRANTY CONDITIONS
The warranty period is 24 hours after the delivery date of the product.
month.
All parts on the product are guaranteed under the assurance of
AIRONN Ventilation. covered.
In case of a possible malfunction of the product, the repair cannot
exceed 20 working days and the repair period is added to the
warranty period. The repair period starts with the user notifying the
product malfunction to the service station, or if there is no service
station, to any of the product's seller, dealer, agency, representative,
importer or manufacturer. Failure notification can be made by the
consumer by telephone, e-mail, fax, registered letter with return
receipt, etc. ways can be done. However, in case of a possible dispute,
the burden of proof lies with the consumer. If the defect of the
product is not remedied within 10 working days, the manufacturer or
the importer company shall offer another product with similar
features to the use of the consumer until the repair of the product is
completed. required.
If the product suffers a malfunction due to material, workmanship and
assembly errors within the warranty period, it will be repaired without
demanding any labor cost, replacement part fee or any other price.
Elimination of malfunctions caused by using the product other than
the instructions specified in the user manual is not covered by the
warranty.
For any problem that may arise regarding the Warranty Certificate,
the Ministry of Customs and Trade, General Directorate of Consumer
Protection and Market Surveillance can be applied.
Consumers submit their applications regarding their complaints and
objections to consumer courts and consumer arbitration committees.
they can.
Despite the consumer's right to repair the product;
From the moment it is delivered to the consumer, at least 4
(four) times within a year, within the specified warranty
period. either in producer or importer by set guarantee
AIR –AU-SERIES Page 6

www.aironn.com.tr
In case of malfunction 6 (six) times within the period and in
case of not being able to benefit from the goods caused by
these malfunctions,
Exceeding the specified maximum time for repairin case of,
It is determined that the repair of the malfunction is not
possible with a report to be issued by the company's service
station, or by any of the seller, dealer, agency, representative,
importer or manufacturer, respectively, in the absence of a
service station. in case of,
The consumer may request a free replacement of the product, a
refund or a discount at the rate of the defect on the sales price.
If the product is found to be defective consumer;
I. from the contract by declaring that he will return the sold
product. rotation,
II. Withholding the sold product and requesting a discount on
the sales price at the rate of defects,
III. In cases where the defect of the product does not require
excessive costs, request the free repair of the sold product at
the seller's expense. don't,
IV. If possible, request the replacement of the sold product with a
non-defective one. don't,
It can only use one of its optional rights. The seller is obliged
to fulfill this demand preferred by the consumer.
AIR –AU-SERIES Page 7

www.aironn.com.tr
SPECIAL WARRANTY CONDITIONS
1. Our company is responsible for the damage that may occur during
the transportation and installation of the customer. is not.
2. Failures that may occur during the warranty period are only
repaired by our company's service personnel or service personnel
who have received the necessary training and are authorized by
us. The warranty is void if other persons interfere with the
machine without our written agreement.
3. The warranty given by our company is valid if the machine is used
as described in this user manual, otherwise the warranty is valid.
is void.
4. If the warranty document has been tampered with, the original
serial number has been removed or tampered with, this warranty
will be voided. falls.
5. The warranty given in this document is valid if the obligations and
responsibilities of the customer written in the user manual and
catalog are completely fulfilled.
AIR –AU-SERIES Page 8

www.aironn.com.tr
USER RESPONSIBILITIES AND WARRANTY
AIRONN is in no way responsible for the following except those included
in this user manual. cannot be held.
All kinds of laws and norms do not allow. from uses
Inappropriate and unsuitable of the area and structure where the
machine will be used. to be
Non-compliance or incorrect use
Electricity not suitable for the specified electrical installation use
Any kind not made by authorized people’s modification
out of the performance of the machine use
Necessary maintenance failure to do
Trained personnel external machine use
non- original and manufacturer's use of non-approved spare
parts
ANY MODIFICATION ON THE MACHINE IS PROHIBITED !!!
AIR –AU-SERIES Page 9

www.aironn.com.tr
PRODUCT INFORMATION
PRODUCT DESCRIPTION
Aironn Lobby Type Roof Fresh Air Fan series fans max. It is suitable for
operation at 55 °C. Backstage Axial Roof Type Fresh Air fans, which are
offered in the diameter range of 400 mm –1250 mm, prevent heat
transfer under normal conditions thanks to their motorized retractable
cover and 50 mm thermal insulation. The lid, which opens and closes
automatically, can lift the distributed snow load on the lid up to 1000 N
thanks to its powerful motor. Information about the open or closed status
of the cover can be obtained through the switch on the fan. The body,
which is designed to be waterproof inside, is made of stainless galvanized
steel material, and a special paint can be applied in the desired color upon
demand. Thanks to its 50 mm thermal insulation, it prevents heat loss
between indoor and outdoor conditions in different weather conditions.
The performances of Aironn Lobby Type Roof Fresh Air Fans are tested in
accordance with AMCA 210-07 standard. has been done.
Figure –1: Axial Lobby Roof Type Fresh Air Fan Series
AIR –AU-SERIES Page 10

www.aironn.com.tr
Fan Body
The body of the fans is made of high quality sheet metal and coated with
corrosion-resistant hot-dip galvanization. Fan flanges are manufactured by
bending from the body and thus the fans are self-flange. It is produced as
a long body as standard. With body maintenance cover option is offered.
Wing
Wings with aerodynamic structure are manufactured from ETIAL 171
material by injection molding method and are statically and dynamically
balanced according to ISO 1940/1-2003.
Engine
IP 55 motors with F insulation class had 2 motors offered with single-
speed or double-speed options. If desired, single-speed motors are
suitable for inverter use.
Electric
IP 55 electrical junction box made of plastic material is offered as standard.
Accessory
Counter Flange, Non-Return Damper, Wire Cage, Flexible Connection, Pako
Switch, Vibration Sensor, Inverter.
AIR –AU-SERIES Page 11

www.aironn.com.tr
AIRONN AIR-AU SERIES FAN LABEL
Figure –2: Axial Lobby Type Roof Fresh Air Fan Series Label Example
AIR –AU-SERIES Page 12

www.aironn.com.tr
AREA OF USE
AIR-AU Series Axial Lobby Type Roof Type Fresh Air Fans; It is used for
pressurization in systems such as stairs and elevator shafts, and for fresh
air supply in systems such as parking lots, hospitals, warehouses.
THE INTENDED USE OF THE MACHINE IS CLEARLY STATED
IN THIS MANUAL. THE MACHINE, EXCEPT FOR THESE
PURPOSES
USING IS STRICTLY PROHIBITED !!!
Any damage that may arise from the use of the machine other than its
intended use is beyond the responsibility of AIRONN.
The machine's usage capacity is limited by the duct sizes on the label.
AIRONN cannot be held responsible for any damages that may arise from
using the machine above the specified capacity.
AIR-AU Series Axial Lobby Type Roof Type Fresh Air Fan are designed for
pressurization and fresh air supply only. AIRONN does not accept
responsibility for negative situations that may occur in case of
operations different from its function with the machine.
PACKAGING CONTENT
1 x Axial Lobby Type Roof Type Fresh Air Fan
1 x User Manual
AIR –AU-SERIES Page 13

www.aironn.com.tr
GENERAL NOTES ABOUT THE MACHINE
All modification works on the machine other than authorized personnel
are prohibited. The manufacturer does not allow any misuse without its
permission.
If the instructions in the user manual are not followed will occur
no danger damage or any situation AIRONN VENTILATION
AND AIR CONDITIONING SYSTEMS Ltd.' It cannot constitute a good
binding reason . Giving all kinds of training and information to the user
personnel in accordance with the employer CE norms has to. This why
the machine without using before This use
The manual must be read and understood by the user .
THE MACHINE CAN ONLY BE USED BY AUTHORIZED OPERATOR!
The machine always complies with the necessary safety precautions if the
instructions given in the MAINTENANCE INFORMATION section are
followed. These instructions are intended as a precaution against any
safety risks that may occur for personnel using the machine. given. of the
machine full capacity And productive study fully complied with the
instructions in this booklet. If provided . This booklet should be kept in
an easily accessible place as long as the machine is in use, and any
changes and warnings made by the manufacturer should be indicated on
the booklet. If the machine is sold to another user, the relevant booklet
must be delivered.
The manufacturer does not allow the reproduction and copying of this
booklet for any reason and all rights are reserved. All kinds of pictures and
drawings in the booklet serve as a guide. The manufacturer reserves the
right to remove, delete and change them.
The machine is delivered to the customer with a label attached to the
machine with the identification information on it.
AIR –AU-SERIES Page 14

www.aironn.com.tr
ABBREVIATIONS
AIR –XX / XXX –XX –XX / XX –X –XX
Motor Frequency (Hz)
Motor Pole Number (P)
Engine Power (kW)
Propeller Blade Angle(⁰)
Number of Blades
Fan Diameter (mm)
Fan Type
AU –Axial Fan
AIR –AU-SERIES Page 15

www.aironn.com.tr
OVERALL DIMENSIONS
Figure –3: Axial Lobby Type Roof Fresh Air Fan Series General
Dimensions
AIR –AU-SERIES Page 16

www.aironn.com.tr
GENERAL SAFETY INSTRUCTIONS
**In this section, the safety instructions that must be followed during
the transportation, installation, use, maintenance and scrapping of the
machine are given.
WARNING LABELS ON THE MACHINE
Electric Yes Caution Spinning
Machine
Warning
Hand Jamming
Grounding Under Load
Hazard Standstill
Figure –4: Warning labels on the machine
** These pictures and tags are for illustrative purposes only. It may not
exactly match the labels on the delivered machine.
AIR –AU-SERIES Page 17

www.aironn.com.tr
DURING HANDLING AND SHIPPING
In order for your product not to suffer any damage during transportation;
While packaging the product, care was taken to ensure that it was
suitable for normal transportation conditions. Always in its original
package to avoid possible damage or damage. must be moved.
Lifting and loading should only be done by authorized and qualified
personnel. should be done.
in the rain or wet conditions should not be kept waiting.
The products should be placed in such a way that they remain
completely immobile in the vehicle in which they will be transported, in
order to avoid a possible tipping or falling situation.
The product should be stored in its own package so that it is not
exposed to any vibration, dust, abrasive or chemical substances until it
reaches the place where it will be installed. Accept products that are not
in their original packaging or that you find to be opened when they reach
you. Please do not.
Appropriate levers to prevent damage to the product and the people
carrying it during the transportation of heavy products. should be used.
Take all necessary measures to prevent damage caused by careless,
rapid lifting and lowering. should be taken.
AIR –AU-SERIES Page 18

www.aironn.com.tr
After the product is unpacked;
Check the accuracy of the product you receive Please pay.
The product should be checked for damage during transportation. If
there are missing or damaged parts/parts, the shipping company and
Aironn Logistics Department official should be informed immediately,
verbally and in writing .
When receiving the devices in the field, check on the delivery note that
the parts (vibration mount, counter flange, etc.) that are shipped
separately and unassembled from the device are sent in a separate box.
Keep these materials in a safe place. do it.
If there is any damage during transportation, take photos of the
damaged products and take a record, and immediately report to the
Aironn Logistics Department representative and the shipping company .
please report.
The product should not be lifted by holding the electrical cables or the
junction box. Situations that will damage the wings during transportation
should be avoided.
During the transportation process, personnel, hard hats, gloves and
steel-toed shoes should wear.
AIR –AU-SERIES Page 19