Airtame DG-2 User manual

On top of the projector
AVOID
HOT
SPOTS
Flexible mounting
Fix the magnetic wall mount to the back of
the Airtame 2 and attach it to a magnetic
area without removing the protective seal.
The backs of many TVs are magnetic.
The magnet will not damage the TV or
projector.
Permanent mounting
The non-removable adhesive is optional and can be stuck to a hard surface, such as a
wall. Use the non-removable adhesive for permanent installation.
For more information visit: airtame.help/mounting
Read the installation guide and pick one
of the following mounting options:
Get started
Follow the instructions at
airtame.com/setup
If you need help, you can always reach us
at airtame.com/support
Attention!
The adhesives included are
non-removable and should only be used
for permanent mounting.
Help and online support
Our dedicated support team is available
every working day.
Chat with us directly at airtame.com
Get latest news
Find all the latest product updates and
company news at airtame.com/blog
Help and guidance is only one click away.
Go to airtame.com/support
Mounting options Magnetic wall mount Committed customer support
Installation guide
The optimal installation is only a few steps away
Airtame - Helpcenter +
airtame.com/supporthttps://

Approx.
10 cm /
4 inch
4. Download the Airtame app
3. Create an organization at
airtame.cloud and add the Airtame 2
for easy management and more.
2. Install app and follow the
instructions.
1. Go to airtame.com/setup and
download the Airtame app that
ts the operating system.
To connect to your Airtame,
users need to download the
Airtame app.
3. Cable management2. Mount the Airtame 2
Hold Airtame 2 onto the magnetic wall
mount while plugging in the USB-C cable.
Remove the protective seal and
expose the non-removable adhesive.
Keep the Aircord straight and
stick the cable splitter to a
surface behind the TV.
Press gently to ensure
that the non-removable
adhesive sticks to the
surface.
1. Plug in the Aircord
Do not power Airtame 2 via
the TV.
Fix the magnetic wall mount on the
back of the Airtame2.
Do not extend the USB part of
the Aircord.
Plug in HDMI to the TV and connect USB A to the power
supply. Always use the provided power supply to power
the Airtame 2.
Remove the protective seal and ex-
pose the non-removable adhesive.
For optimal streaming, mount the
Airtame 2 on the wall approx. 10 cm
/ 4 inches from the edge of the
TV using the non-removable
adhesive.
Only use the non-removable adhesive for permanent mounting.
Airtame - Helpcenter +
airtame.com/setuphttps://