2. Indicator light / Message sending
On the setting interface, toggle the switch to turn on / off the settings:
① Indicator light: Turn on the switch, the light around the doorbell button will light as the
device wakes up. Switch off, the light lights up only when the device is powered up or
someone presses the button or in abnormal network situation.
① Push message: Open the switch to receive the push message of the device. If close,
APP cannot receive the push message from the device.
3. Night vision infrared light
On setting interface, select “Night vision infrared lamp” to enter Night vision infrared light
setting.
Night vision settings:
On: The device keeps the light sensor on.
Off: The device cannot trigger the light sensor.
Auto: The device can automatically turn on / off the trigger night vision.
When device in dark condition, IR-cut lens IR filter open, infrared light is on, video
surveillance image is black and white, when in bright environment, IR-cut lens IR filter
close, infrared light is off, surveillance video is RGB image.
4. Motion Detection Sensitivity Configuration
On setting interface select “Motion detection sensitivity”. Enter the setting,
Turn on /off and select sensitivity level
Off: Not trigger PIR.
Low: Trigger in 10 seconds when someone /something enter PIR detection range, the
device wakes up by motion detection, sends push message to APP and record a
surveillance video of current scene.
Medium: Trigger in 5 seconds when someone /something enter PIR detection range, the
device wakes up by motion detection, sends push message to APP and record a
surveillance video of current scene.
High: Trigger immediately as someone / something entering PIR detection range. The
device wakes up by motion detection, sends push message to APP and record a
surveillance video of current scene.
5. Ringing Volume
On setting interface select “Ringing volume”. Enter the setting.
Turn Off / On the ringer volume.
On: Doorbell ringing when someone press the button.
Off: The doorbell will not ring when someone press the button.
6. Intercom Volume
On setting interface select “Intercom volume”. Enter the setting, move the slider to select
volume value.
Intercom volume value: 0-10, default value is 6.
The bigger the value set, the louder the intercom sounds
Set volume value at 0: The device does not transmit user voice.
7. Use scenarios
On setting interface select “Use scenario”.
• Playback
Setting
Indicator lamp
Cloud storage
Night vision infrared lamp
Message sending
Time length of automatic video rec... 15s
Mobile detection sensitivity Low
Delete the device
Ringing volume
Intercom volume
Use scenario
Anti-flicker
Device information
50 HZHz
Use scenario
Start
Backlight compensation
Strong light inhibition
Movement
Wide dynamic range
Use scenario:
Off (without scenario): Original video image with default setting.
Backlight Compensation: Suitable for condition with weak light, lighting the dark areas
to get clearer images.
15 16
