ALDI FERREX CBV18F.9 User manual
User Manual
709610
20V LIION CORDLESS BLOWER SKIN
Read all safety warnings and all instructions
thoroughly before operating this product.
Ensure you keep your manual in a
safe place for future reference.
IM ed 2; 10/2022
Product
Info
MODEL No.: TGT2001, PRODUCT No.: 700069
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or after sales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tari you may be charged
for the connection.
Product
Info
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. The benets conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty details
MODEL No.: CBV18F.9 •10/2022 •709610
20V Li-Ion Cordless Blower Skin
AFTER SALESSUPPORT
(toll free)
5
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
Contents
Pack contents / parts 2
Description of symbols 3
General Safety Warnings 5
Additional safety warnings for cordless Blower 8
Parts List 10
Assembly 11
Unpacking 11
Removing or installing the battery pack 11
Operation 12
Starting & stopping 12
Using the blower 12
Adjusting the blowing speed 13
Residual risk 13
Maintenance 14
Clean and Storage 14
Cleaning the blower 14
Storage 14
Warranty 15
Environmental Protection 15
What your 3 year warranty means 16
Service Support 16
Accessories and After Sales Parts 16
Troubleshooting 17
Technical Specications 17
MODEL No.: TGT2001, PRODUCT No.: 700069 3
Congratulations on the purchase of your FERREX® 20V Li-Ion Cordless Blower
Skin. When you open your packaging, rst remove all items and check there are
no parts damaged or missing. If you nd anything wrong, do not operate the
product until the parts have been replaced or the fault has been rectied. Failure
to do so could result in serious personal injury.
Application
First time users or inexperienced operators pay particular attention to the
operation of the 20V Li-Ion Cordless Blower Skin, including details of starting and
stopping and correct use of the 20V Li-Ion Cordless Blower Skin on pages 12-13,
as well as the maintenance instructions on page 14.
Intended use of the 20V Li-Ion Cordless Blower Skin
It is exclusively intended for home use. It is not designed for trade or commercial
use.
This 20V Li-Ion Cordless Blower Skin is intended for residential use only. Use the
blower outdoors to move yard leaves and debris as needed.
Any other use or change to the appliance is deemed improper and poses a
signicant risk of accidents.
Contents of carton
1 x 20V Blower (skin)
1 x Blow tube
1 x Instruction Manual
1 x Warranty Card & details
Pack contents / parts
2
MODEL No.: CBV18F.9, PRODUCT No.: 709610
MODEL No.: TGT2001, PRODUCT No.: 70096
Description of symbols
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product or
instructions on its use.
To reduce the risk of injury, user must read instruction manual
Keep bystanders away.
Warning of hazard
Do not use in the rain or leave outdoors while it is raining.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear eye protection.
To reduce the risk of injury, user must read instruction manual
32 MODEL No.: CBV18F.9, PRODUCT No.: 709610
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
4
60
Box
Conforms to relevant standards for electrical safety and electromagnetic
compatibility.
Warning
60 Months Warranty
The box is recyclable at the kerbside.
The inserts are recyclable at the kerbside.
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, re
and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
5
General safety warnings
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
6
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
MODEL No.: CBV18F.9, PRODUCT No.: 709610 MODEL No.: CBV18F.9, PRODUCT No.: 709610
b) Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specied by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of re
when used with another battery pack.
b) Use power tools only with specically designated battery packs. Use
of any other battery packs may create a risk of injury and re.
c) When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a re.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
7
This manual suits for next models
1
Table of contents
Other ALDI Blower manuals
