ALDI UMF1600 User manual

MITRE SAW STAND
@
Vers No

Explanation of the symbols on the equipment.............07
Introduction .......08
Overview ...........09
Scope ofdelivery ...............09
Intended use ......... ...........09
Safety regulations ..............10
Assembly instructions ..........11
Adjustments and Operation............ ........12
Technicaf data ........ ..........12
Transport ..........13
Maintenance ......13
Disposal and recyclinS ........... ............13
Warranty Details ................15
Repair and Refurbished Goods or Parts Notice ............16

Pack contents/parts
1
2
3
4
5
6
7
8
9
10
11
12
1 x Mitre saw stand
2 x Support bracket
4 x Star knob screw (short)
2 x Roller support
2 x Mounting tube
2 x Star knob screw (long)
4 x Socket head screw, M6x60 mm
4xNutM6
4xWasher6mm
4 x Spring washer 6 mm
1 x Manual
1 x Warranty certificate

Explanation of the
UMFl600
r
Explanation of the Symbols
A ATTENTION!
A CAUTION!
A WARNING!
Read the operating instructions to reduce the risk
of injury
These operating instructions provide places concerning
your safety which are marked with this symbol.
Failure to follow these instructions may cause risk of
rnJury.
Failure to follow these instructions may cause danger to
life or serious injuries.
AFTER SALES SUPPORT
a @ 1300 8s5 831
7
E [email protected]
MODEL: UMF1600 PRODUCT CODE: 42929 0612017

UMFl 600
l. lntroduction
Congratulations on choosing to buy a WORKZONE TITANIUM@ product.
All products brought to you by WORKZONE TITANIUM@ are manufactured to the
highest standards of performance and safety, and as part of our philosophy of cus-
tomer service and satisfaction, are backed by our comprehensive 5 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Note:
The manufacturer of this device is not liable for damages which arise on or in con-
nection with this device in case of:
. improper handling,
. non-compliance with the instructions for use,
. repairs by third parties,
. installation and replacement of non-original spare parts,
. rmproper use.
Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation
of the device.
These operating instructions are intended to make it easier for you to become famil-
iar with your device and utilise its intended possibilities of use.
The operating instructions contain important notes on how to work safely, properly
and economically with your device and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and working life of the device.
ln addition to the safety regulations contained herein, you must in any case comply
with the applicable regulations of your country with respect to the operation of the
device.
Put the operating instructions in a clear plastic folder to protect them from dirt and
humidity, and store them near the unit. The instructions must be read and carefully
observed by each operator prior to starting the work Only persons who have been
trained in the use of the device and have been informed on the related dangers and
risks are allowed to use the device.
ln addition to the safety notes contained in the present operating instructions and
the special regulations of your country, the generally recognised technical rules for
the operation of wood working devices must be observed.
8
R [email protected]
MODEL: UMF1600 PRODUCT CODE:
AFTER SALES SUPPORT
a @t 1300 855 831
42929 06t2017

@
de very/ ntended use
UMFl600 Overview/Scope of
ll. Overview (Fig. 1-2)
1 Mitre Saw Stand
2 Support bracket
3 Star knob screw (short)
4 Roller support
5 Mounting tube
6 Star knob screw (long)
lll. Scope of delivery
Mitre Saw Stand (1 Pcs.) Support bracket (2 Pcs.)
Roller support (2 Pcs.) Star knob screw; long (2 Pcs.)
Star knob screw, short (4 Pcs.) Socket head screw, MGx60 mm (4 Pcs.)
Nut M6 (4 Pcs.) Washers 6 mm (4 Pcs.)
Spring washer (4 Pcs.) Manual (1 Pcs.)
Warranty certificate (1 Pcs.)
. Open the packaging and remove the device carefully and place the product and
accessories on a flat surface.
. Remove the packaging material as well as the packaging and transport bracing
. Check that the delivery is complete. (Call the help line if you are missing any
parts)
. Check the device and accessory pa fortransport damage.
. lf possible, store the packaging until e warranty period has expired.
A ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!
lV. lntended use
The universal Mitre Saw Stand has been designed for the use with other bench top
machines that have similar fixing points.
Do not use the Mitre Saw Stand in combination with m chines that do not have
fixing holes.
Before starting work, any machine must be firmly bolte J onto the Mitre Saw Stand
AFTERSALESSUPPORT 9
8 @t 1300 855 831 E [email protected]
MODEL: UMF1600 PRODUCT CODE: 42929 0612017

use/Safety regulations UMFl600
and then attached to the Mitre Saw Stand as described.
The maximum work piece length is 2.5 metres, the maximum work piece thickness
is 20 mm.
lf required, use additional roller supports (e g. a roller block) to support work pieces.
Do not place working and measuring tools on the multi-purpose saw bench.
ln general, the work pieces to be processed must be free from foreign matters, such
as nails or screws.
Any other use is considered to be not intended. The manufacturer is not
liable for resulting damages, the risk is exclusively borne by the user.
Please note that our equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equivalent purposes.
V. Safety regulations
A CAUTION!
Read all safety regulations and instructions.
Read and follow these instructions before using the equipment and keep the safety
information in a safe place for future reference.
. The device has been constructed according to the state ofthe art and the rec-
ognized safety rules. Nevertheless, single residual risks may occur during the
operation.
. Keep children away during assembly and operation.
. lnspect the product for damage before each use.
. Ensure the work piece is securely and properly clamped during operation.
. Risk of injury from swinging workpiece with improper support, or work without
guidance.
. Risk of injury for fingers and hands caused by the rotating saw blade of the
table circular saw in case of an improper guidance of the work piece.
. Larger work pieces, e.g. panels, may tilt during the processing and must, there-
fore, be additionally guided and supported.
. Furthermore, non-obvious residual risks may exist in spite of all measures
taken.
. Residual risks can be minimised by carefully observing the "lntended Use"
instructions as well as the entire operating instructions.
Keep this safety information in a safe place.
10 AFTER SALES SUPPORT
E [email protected] A @ 1300 855 83'l
MODEL: UMF1600 PRODUCT CODE: 42929 0612017

UMFl600 Assembly
Vl. Assembly instructions
The Mitre Saw Stand should be assembled completely before use.
Proceed as follows:
1. Legs, Fig.34
. Place the product upside down on the ground.
. Press the spring bolt (D) and keep it in position.
. Slightly unfold the leg (1.1)and release the spring bolt. Unfold the leg further until
the spring bolt snaps in position.
. Repeat the same action for the other 3 legs.
. Turn over the product and place it onto the ground. Ensure the legs stand correctly
on an even and stable ground.
A WARNING! Always ensure the bolts of four legs snap in position before using
the producUplacing the Mitre Saw Stand on the ground.
2. lnstalling the support brackets (Fig. 5)
. Ensure the handle (2.3) is disengaged.
. Hook the front end onto the sliding frames and then place the support bracket (2)
onto the product. A WARNING! Danger of clamping finger when pushing han-
dles downward!
. Push the rear end downward to hook it onto the sliding frames.
. Push the handle (2.'1 )downward to secure the support bracket in position.
. Repeat the same action for the other support bracket.
3. Installing the roller supports (Fig. 6)
. Align and insert the mast of the roller support (4) into the mounting tube (5).
. Hold the roller support on the desired height and tighten the star knob screw (long)
(6) to secure it in position.
. Repeat the assembly for the other roller support.
. Fix the star-knob screws (3) into the threads of the Mitre Saw Stand.The work-
piece support can be adjusted in its length and height by lowering the star-knob
screws (3 and 6).
4. Fitting a machine (Fig. 7) /
Several bench machines can be fitted to your universal Mitre Saw Stand by adjusting
the support brackets (2) in its distance to the mounting holes of your device.
. Position your Mitre Saw onto the support brackets (2).
. Fasten the Mitre Saw to the support brackets by using 4 hexagon bolts, 4 lock wash-
ers, 4 spring washers and 4 hexagon nuts (supplied).
. Tighten the screws firmly with an open-end wrench (wrench size 10 mm).
. Set the support brackets (2) with the assembled Mitre Saw onto the universal Mitre
AFTER SALES SUPPORT E [email protected]
MODEL: UMF1600 PRODUCT CODE: 42929 0612017
11
a @ 1300 855 831