Aleratec 260180 User manual

Quick Start Guide
www.aleratec.com

ESC
OK
Welcome!
Congratulations on your purchase of an
Aleratec DVD/CD Copy Tower, considered by
industry experts to be one of the nest DVD/CD
duplicators available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make owning
and operating your new Aleratec DVD/CD Copy
Tower a pleasant experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
DVD/CD Copy Tower.
For more detailed information on conguring the
DVD/CD Copy Tower and applying it’s various
capabilities, please refer to the User Guide on the
CD included.
We at Aleratec appreciate your selection of
our product, and wish you great success and
enjoyment of your new DVD/CD Copy Tower.
Product Features
• Upto7simultaneousDVDcopiesatupto22xor
CDcopiesatupto48x
• PowerfulControlFeatureswithbacklitLCDDisplay
andintuitivemenumaximizingcopycontroland
flexibility
• Simpleonetouchoperation
• Highestrecordingspeedsforhighvolumecopying
• Stand-Alone,nocomputerrequired
Key Items on the DVD/CD Copy Tower
1:3 DVD/CD Copy Tower™ Part Number: 260180
1:5 DVD/CD Copy Tower™ Part Number: 260181
1:7 DVD/CD Copy Tower™ Part Number: 260182
Controller: OK is used to execute a
function, or enter a menu
ESC is used to cancel a
function, or exit a menu
UP arrow is used to scroll
backward through functions
or menus
DOWN arrow is used to
scroll forward through
functions or menus
Warning: This product has a manually switchable
power supply. Make sure that the power supply
is set to the proper voltage for your region.
Included Items
• DVD/CDCopyTower
• PowerCord
• UserGuideCD&QuickStartGuide(thisdocument)
• AleratecRegistrationCard
Display
Panel
Target DVD
Drives (3)
Power Switch
Eject
Button
Source
DVD Drive
1:3 DVD/CD Copy Tower shown.

© 2014 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 260180-260182_ENG_QSG_Rev_A
Specifications subject to change without notice.
Getting Started
Main Menu Functions
ThissectionprovidesalistingofthefunctionsontheDVD/CDCopyTower.Detaileddescriptionsofeachfunctionaregiven
inthenextsection.Thefunctionsarenumberedforeasyreference;thesenumbersarealsousedinthenextsection.There
are8mainmenuitemsthatwilldisplayintheDVD/CDDuplicatorDisplayPanel.Theseare:
For Quick On-The-Fly Copies
Duringtheduplicationprocess,datawillbesimultaneouslywrittentoallblankdiscsloadedintheDVD/CDCopyTower.
PleasemakesurethesourcediscisplacedintheSourceDrive.
1. PlaceblankdiscsintotheDVD/CDRecordersasneeded;whentheDVD/CDRecordersdetectthediscsarepresent,
presstheOKbutton,andtheduplicatorwillstartcopying.





2. TheLCDwilldisplaythestatusofthecopyingprocess.




3. WhenCopyisfinished,discswhichhavepassedwillbeejectedautomaticallyandfaileddiscswillremainintheDVD
Recorders.PresstheOKbuttontoejectanyfaileddiscs.




Note: DVD-RW discs which already contain data can also be used as blanks in the DVD/CD Copy Tower. Any
data stored on DVD-RW discs will be automatically erased before copying new data. Be sure you do not want
data on DVD±RW discs inserted as blanks as any DVD±RW discs inserted in the DVD-Recorders to be used as
blank media will automatically be erased, and then the content from the source DVD will be recorded on them.
Please refer to the User Guide found on the disc for more detailed information.
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected] – Skype:support.aleratec.com
• ByTelephone:1-818-678-0484 – FAXat:1-818-678-0483
• TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
Accessisavailable24hoursaday,365daysayear,viaTheWorldWideWebat:www.aleratec.com
1. Copy
Copy x3 105M
0% 1M
PASS 3/3
FAIL 0/0
1. Copy
5. Set Burn Speed
2. Test
6. Select Source
3. Compare
7. Utility
4. Copy + Compare
8. Setup