Alfred DB1 Series User manual

Hello,
Thank you for joining the Alfred family. We wrote this to make sure your
smart lock is as easy to set up as it is to use. Alfred owners are provided
with security, peace of mind, and ease of use. Here are a few quick tips to
get you started:
INSTALLATION
Installing Alfred is easy. With our partnership with mobile
app BILT you are able to get step by step visual installation
procedures which you can follow along on your phone. The
BILT app will show you how to install your latch and how to set
your handing switch correctly. Go to the Apple App Store or
Google Play to download BILT and search “Alfred”.
TOP POST
Your Alfred lock may have a 3rd top post installed in the box. This extra
post is provided for extra security or to overcome some door defects
where your door face might not be perfectly straight. This 3rd top post is
easy to remove with a pair of pliers if you do not wish to drill any
additional holes in your door, or don’t fi nd it is required. For instructions,
please refer to the BILT installation videos or refer to the instructions
manual included with your device.
SMART HOME TOUCHSCREEN DEADBOLT
CONTACT US
Need any assistance with your Alfred smart lock?
Call us toll-free at 1-833-4-ALFRED (1-833-425-3733).
Or, email us at [email protected].
ALFRED HOME APP
Controlling and Programing your Alfred Lock is simple with the
Alfred Home App. Make sure to Download the Alfred Home App
on your iOS or Android device.
DB1
SERIES

The Master PIN Code must be changed before any further
programming can begin.
STEP 3
ADD UP USER PIN CODES
1. Touch the screen with your hand to activate.
2. Enter “*” twice and the Master PIN code followed by “#”.
3. Enter “2 + User Number (01-20)” followed by “#”.
4. Enter User PIN code (4-10 digits) followed by “#”.
5. Repeat step 4 to confi rm your PIN code.
LOCK RESPONSE
SUCCEED: Lock responds with 2 beeps, green indicator fl ashes.
FAILED: Lock responds with 3 beeps, red indicator fl ashes.
QUICK START GUIDE
STEP 1
Download the Alfred Home app to quickly add, setup, and program
your new Alfred lock and accessories. For manual setup, please see
steps 2 and 3.
STEP 2
CHANGE DEFAULT MASTER PIN CODE
1. Touch the screen with your hand to activate.
2. Enter “*” twice and the 8-digit default Master PIN Code
(12345678) followed by “#”.
3. Enter “1 + new Master PIN code + #”.
4. Enter “new Master PIN code + #”
LOCK RESPONSE
SUCCEED: Lock responds with 2 beeps, green indicator fl ashes.
FAILED: Lock responds with 3 beeps, red indicator fl ashes.
DB1 Series
LOCK
Press and hold any key on keypad for 1 second.
You can also lock your door by turning
the thumbturn toward the door edge.
UNLOCK
Place palm over lock to wake up the keypad. Input User
PIN code or Master PIN code and press “#” to confi rm.
You can also unlock your door from inside by
turning thumbturn away from the door edge.
Still have Questions about your new Alfred Smart Lock?
Please don’t return it to the store!
Let us help you fi rst!
CALL 1-833-4-ALFRED (1-833-425-3733).
OR, EMAIL US AT
[email protected]
For your security, we have created a Simple PIN Code rule. Both
Master and User PIN Codes cannot have the following attributes:
1. Consecutive numbers: for example: 123456 or 654321.
2. Duplicated numbers: for example: 111111 or 222222.
3. Include or be included within other existing PIN codes.