Alico STT003D-B User manual

[email protected]
INSTALLATION MANUAL
Monitor Stand Riser
STT003D-B/STT003D-2B
STT003D-W/STT003D-2W
20kg
44lbs
RATED

Supplied Parts List
Step 1
Step 2
A(x1) B(x1)
2
C(x1) D(x1) E(x1)
F(x4)
Shelf Left Bracket Right Bracket Stand Drawer
Strap
Place Shelf on a flat surface with bottom upward as the image shown.
A
Caution: A
Caution:
Attach the Left and Right bracket to the Drawer .
BC
G
E
Please make sure the Drawer and brackets are placed in the correct arrow direction as the image shown.
E
BC
Please make sure Shelf is in the same direction as image shown (Tip: Check the two holes facing the correct
direction).

Step 4
Step 3
3
Firmly hold the assembled Drawer and insert it to the screw on Shelf as the image shown.
A
A
Please make sure the arrow on the brackets are pointing to the cable slots on the Shelf .
A

4
Step 5
Step 6
5.6”
4.8”
4”
A
D
E
A
D
Manually adjust Support Stand height to personal preference.
D
Insert Support Stand to the screw on Shelf and rotate the Support Stand clockwise to fasten for stability.
D