ALIGATOR Watch LadyX User manual

Aligator
Watch LadyX
Instructions for use

1
Table of Contents
Important instructions.............................4
Controls and strap fitting ........................6
Wearing awatch correctly....................... 6
Charging..................................................7
Switching on and off................................7
Control basics.......................................... 7
Feature menu......................................... 10
Useful features...................................... 12
Information screens............................... 13
Connecting your watch
to your phone .......................................15
Display measured data
on your phone ......................................16
Monitoring the physiological cycle ....... 17
Watch settings....................................... 17
Setting notifications on your watch ...... 18
Phone and music functions
in the watch........................................... 18
Setting the look of the dial ....................22
Record your workout on your watch
or in the app........................................... 24
Edit personal settings and data ............ 24
Find your phone with your watch and
vice versa...............................................25
Waterproof IP67..................................... 25
Troubleshooting.....................................26
Safety and ecology................................27
Declaration of conformity......................28

Aligator
Watch LadyX
Basic layout of screens

Lots of useful features on offer

4
Thank you for purchasing an ALIGATOR
product. Please read these instructions
on how to use your new smartwatch.
Important instructions
• Handle the product and accessories
with care and protect them from
mechanical damage and dirt.
• Protect the product and accessories
from extreme temperatures.
• Do not throw the product into fire
or expose it to temperatures above
+60°C (+60°F). The product contains
abuilt-in battery.
• Protect the product and accessories
from falling to the ground.
• The product does not contain
any user-repairable parts, never
disassemble the product
or accessories.
• Switch the product off on the aircraft
unless specifically authorised to use it.
• Do not use the product near explosives.
•
Keep out of reach of children and do not
allow them to play with the product.
It may contain small parts that could
choke them or otherwise injure them.
• The software and hardware of the
product is continuously upgraded.
The manufacturer therefore reserves
the right to change the instructions
and individual functions of the phone
without prior notice.

5
For more information, tutorials
and video tutorials on how to set
up your smartwatch, visit:
www.aligator.cz

3
6
Controls and strap fitting
The watch is equipped with
two buttons on the side for
basic easy operation.
The watch display is fully
touch-sensitive, which
is used to control other
functions of the watch.
The watch strap can be
easily removed by means
of alever located on each of
the lugs on the underside
of the strap. Push the lever
3
and the link will release.
Wearing awatch correctly
Put the watch on your wrist so that the
back with the sensors fits snugly against
the surface of your hand, see Fig.
1
2
Sensor

7
Charging
Charge the watch before using it for the
first time. To charge, use the included
magnetic adapter, which is attached
to the contacts on the back of the watch.
The magnets will hold the end of the
adapter in the correct position. Plug the
other end of the adapter into asuitable
USB socket. The display will show the
battery charge status when connected.
Switching on and off
To turn the watch on/off, press and hold
button 1 until the watch turns on/off.
You will still need to press the button on
the phone display to confirm that it has
been switched off.
Control basics
The watch display is dimmed as standard
to save battery power. To activate the
watch display, press the button. The
display will darken itself after ashort
period of time or you can darken it by
pressing button 1.
USB
Magnetic
Adapter

8
To view the function menu, slide your
finger across the display from left
to right (move backwards to go back).
Acircular menu is displayed by default.
To select afunction, tap on the
corresponding icon in the menu and tap
in the middle of the display to activate it.
In the settings, the menu style can
be switched to aclassic line list
(Settings STYLE MENU).
By sliding your finger across the
display from right to left, you can scroll
through the individual function
and measurement screens in sequence.
Diagram of the basic layout
of watch faces

9
To go back up alevel in the menu
either press button 1, or swipe the
display from left to right.
To quickly view messages, swipe up
from the bottom of the main screen
(swipe back the other way to go back).
Swipe down from the top of the main
screen for quick setup and overview
(swipe back to go back). You can quickly
switch watch modes, adjust brightness,
vibration, or start settings. Connection,
battery status and weather information
are also displayed.
Press button 2 to display the training
activity measurement menu.