All Fur You Whisper Water Fountain User manual

whisper
water fountain
Thank you for your purchase of an All Fur You Whisper Water Fountain.
In order to ensure the safe operation and maximum life of your product, please
take the time to read these instructions before use and store for future reference.

COMPONENTS:

PRODUICT SPECIFICATIONS:
Product Name: Whisper Water Fountain
Output Voltage: 5V
Power Consumption: 2W
Pump: Ultra Low Noise DC Pump
Input: USB cable
Product Dimensions: Circular base
205mm (W) x 183mm (H)
8 in (W) x 7.2 in (H)
Product Weight: 0.9kg (2 lb)
Cord Length:1.5m (1.6 yd)
Material: High Gloss Anti Bacterial PP Resin
Filtration System: coconut shell activated carbon filter
and plasma exchange resin filter
Capacity: 2.5L (84 oz)
PLEASE NOTE:
For indoor use only
Try to avoid the possibility of the plug, cable and power outlet getting wet
If possible place the power adapter higher than the unit
Replace any frayed or chewed USB cables
Place the fountain on a protective surface or mat to avoid spillage

PUMP MAINTENANCE:
WATER FOUNTAIN MAINTENANCE:
To ensure the maximum life of your pump, cleaning is very important.
We suggest a simple clean every two weeks.
** Avoid the USB port when cleaning your device.
Use a soft cloth or sponge together with mild detergent to clean the
inside and outside of your fountain.
Use only fresh water to wash the sponge filter, avoid detergents
Never use hot water, gasoline, alcohol or organic solvents to clean the
water dispenser.
1. Open the pump cover
2. Using a coin, a key or fingernail remove the bottom impeller cover
3. Remove the impeller and wash the parts in dishwashing liquid with warm water.

All Fur You is a brand proudly brought to you by Select Trading Pty Ltd
allfuryou.com
/allfuryoupets
@allfuryou