ALLIANCE GIAPTP018 User manual

ASSEMBLY INSTRUCTIONS
7SMGIAPTP01
GIAPTP018 / GIAPTP027
NOTE:
Please carefully read through instructions once before proceeding with assembly.
(1) Heavy load, 2 or more adults are recommended to assemble.
(2) Proper lifting posture is recommended to avoid injuries.
(3) Table contains small parts & components not suitable for children.
(4) Table contains joints and folding parts. Care should be taken durable stowage &
assembly
(5) Products is free standing. Efforts should be made to ensure product is used on even
surface.
Part Description Quantity
Bolt: 12
Washer: 12
Leg Leveller 4
Bolt: 8
Bolt: 8
Washer: 24
Locking Nut 8
COMPONENTS:
Pool Tables
1
2
3
4
5
6
7
PG3
6. Requiring atleast 2 people, flip table
back to up right position.
* Heavy load: Caution must be taken
when turning table up right. Where
additional heavy is recommended.
5/16”
5/16” x 2½” (Thickest Bolt)
¼” x 3”
¼” x 2½”
¼”
¼” x ½”
Side Leg Panels 2
8
Legs 4
9
Side Leg Panels 2
10
Barrel Nuts 8
11

1. Place table face door on smooth even
surface.
* Ensure assembly surface is free of any
debri.
* Carton box top can be used to line floor
surface to reduce change of scratching
table.
ASSEMBLY INSTRUCTIONS
7SMGIAPTP01
GIAPTP018 / GIAPTP027
Pool Tables
3. Screw in table leg leveller base
* Do NOT over fasten or tighten. Adjustment
may be required to adjust table height and
levels.
4. Insert end leg panel between table legs,
and secure with bolt, washer and barrel
nut.
* Place barrel nuts into pre-cut holes in
end leg panel.
* With pre-drilled holes in both leg and end
panel aligned, thread bolt through
washer and leg panel.
* Secure bolt by threading and tightening
into barrel nut in endleg panel.
* Repeat for two (2) bolts per leg x all
four (4) legs.
PG1 PG2
2. Secure legs to table base.
* Note curved side facing outwards
* Each leg is secured by three (3) bolts
and washers and
*Repeat for all four (4) legs.
2
1
9
9
1 2
3
6
4
10
11
A
B
A
B
5. Place side leg panels in the inner part
of the legs
* Thread bolt with washer through both
leg panel and side panel from the
outside.
* Secure bolt by screwing on addtional
washer and locking nut from inner side.
* Repeat for two (2) bolts per leg x all
four (4) legs.
6
5
8
8
7
6