Escalade Atomic g05305w User manual

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Your Model Number ______________________

G05305W/F

have your model number when inquiring about parts.

[email protected]

Please

Date Code ____________________2-G05305W- -FS

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSSEMBLY.

Allen Wrench T1 Included with the Hardware Kit

Furniture Polish and Soft Cloth

Make sure you understand the following tips before you begin to assemble your 3in1 hockey table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

An electric screwdriver is helpful in assembly. However, please set at low torque and use

extreme caution with an electric screwdriver because you could overtighten the hardware

and strip the screws.

THIS 3 IN 1 HOCKEY, TABLE TENNIS, DINING TABLE

TWO ADULTS ARE REQUIRED TO ASSEMBLE

Carpenters Level

Assembly Tips

Tools Required:

READ AND FOLLOW ALL ASSEMBLY, OPERATION,

AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST

TWO ADULTS ARE NEEDED TO ASSEMBLE THIS 3 in 1

TABLE .HOCKEY

ATTENTION:

HARDWARE IDENTIFIER

(To Scale)

(Not To Scale)

H1 = 16 pcs

5/16’’ x 1-1/4’’

Allen Head Bolt

H2 = 48 pcs

5/16’’ x 1-3/8’’

Allen Head Bolt

H3 = 64 pcs

5/16’’x 3/4’’

Flat Washer

T1 = 1 pc

Allen Wrench

(Not to Scale)

PARTS IDENTIFIER

P1 = 1 pc

Main

Table Cabinet

P2 = 1 pc

A Table Tennis Top

With Guide Pins

Reverse Side is The Dinning Top

P3 = 1 pc

B Table Tennis Top

With Guide Pin Holes

Reverse Side is The Dinning Top

P4 = 4 pcs

Table Leg

P5 = 2 pcs

Bench Seat P6 = 4 pcs

Bench Leg

P7= 4 pcs

Bench Support

(Packed inside P5 Bench Seats)

H4 = 64 pcs

5/16’’ x 1/2’’

Lock Washer

For Customer Service Call 1-888-996-2729

Guide Pins Guide Pin Holes

HARDWARE KIT IS PACKED INSIDE OF CARTON A

PACKED INSIDE OF CARTON A

PACKED INSIDE OF CARTON B PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON B

PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON B

(Not To Scale)

ACCESSORIES IDENTIFIER

A4= 2 pcs

Table Tennis Ball A5= 4 pcs

Striker

A6= 4 pcs

Puck

For Customer Service Call 1-888-996-2729

A1= 1 pc

Table Tennis Net

PACKED INSIDE OF CARTON A

PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON A

A7 = 2 pcs

Table Tennis Playfield Support

PACKED INSIDE OF CARTON A

A8 = 2 pcs

Bench Carpet

(Packed inside P5 Bench Seats)

PACKED INSIDE OF CARTON B

A2= 2 pcs

Table Tennis Net Post

PACKED INSIDE OF CARTON A

A3= 2 pcs

Table Tennis Paddle

PACKED INSIDE OF CARTON A

(Packed underneath the playfield)

(Not To Scale)

For Customer Service Call 1-888-996-2729

TABLE TENNIS,DINING TABLE

Parts List

All items are packaged in larger Carton A, except, P4, P5, P7, and A8 are packaged in

smaller Carton B.

NOTE:

Reverse side is dining top.

3 IN 1 HOCKEY,

For Customer Service Call 1-888-996-2729

PARTS REQUIRED

16pcs -

1pc -

4pcs -

H1 Allen Head Bolt

H3 Flat Washer

H4 Lock Washer

P1 Main

1pc - T1 Allen Wrench

Table Cabinet

P4 Table Leg

STEP 1:

Attach P4 Legs onto the Side Aprons and the End Aprons using H1 Bolts, H4 Lock Washers

and H3 Flat Washers as shown in FIGURE 1.

Use T1 Allen Wrench to tighten all H1 bolts.

C1 Leg Leveler (Factory Installed)

FIGURE 1

Helpful Assembly Tip:

Keep Legs flush with the side and end aprons while

tightening all H1 Allen Head Bolts.

CAUTION:

Six strong adults are recommended to

flip the table as shown.

1.Grab the table on the ground.

2.Turn the table over.

3.Place it on all four legs at the same time onto

the floor.

NOTE:

ON/OFF switch is attached to the air fan motor cord. Be sure to always turn fan

motor off when play is completed.

IMPORTANT:

Plug into wall outlet.

Do not allow cord to be a

trip hazard.

C4 Blower with A/C Cord

For Customer Service Call 1-888-996-2729

NOTE:

Using Dining Top：

Remove Table Tennis Net and Net posts. Carefully separate the two playfield halves, flip the

halves and push halves together using the guide pins and guide pin holes in each half top.

PARTS REQUIRED

1pc -

2pcs -

P2 A Table Tennis Top With Guide Pins

P3 B Table Tennis Top With Guide Pin Holes

A1 Table Tennis Net

A2 Net Post

A7 Table Tennis Playfield Support

STEP 2:

Using the guide pins carefully connect the P2 A Table Tennis Top With Guide Pins to P3 B Table Tennis

Top With Guide Pin Holes as shown in DETAIL A. Place A7 Table Tennis Playfield Supports between

Table Tennis Top and Air Hockey table. Install A1 Table Tennis Net by adjusting A2 Net Post as shown in

DETAIL B &FIGURE 2.

DETAIL B

FIGURE 2

DETAIL A

Guide Pins

Guide Pin Holes

Support

For Customer Service Call 1-888-996-2729

PARTS REQUIRED

48pcs -

4pcs -

2pcs -

H2 Allen Head Bolt

H3 Flat Washer

H4 Lock Washer

P6 Bench Leg

P7 Bench Support

P5 Bench Seat

2pcs - A8 Bench Carpet

STEP 3:

FIGURE 3

FIGURE 4

P6 H4 H2

Attach P6 Bench Legs to P7 Bench Supports using H2 Allen Head Bolts, H3 Flat Washers and H4 Lock

Washers as shown in FIGURE 3. Tighten all H2 Allen Head Bolts.

STEP 4:

Attach

Firstly, take the A8 Bench Carpets out from the P5 Bench Seats.

P5 Bench Seat to the Leg assembly using H2 Allen

Head Bolts, H3 Flat Washers and H4 Lock Washers as

shown in FIGURE 4.

Tighten all H2 Allen Head Bolts.

Helpful Assembly Tip:

Keep P7 Bench Supports flush with

the edges of the P6 Bench Legs.

H2 H3

For Customer Service Call 1-888-996-2729

PARTS REQUIRED

2pcs - A8 Bench Carpet

STEP 6:

FIGURE 6

Install the A8 Bench Carpet into each bench as shown in FIGURE 6.

WARNING:

To prevent injury, exercise caution when opening and closing the bench lid.

DO NOT let bench lid drop shut.

DO NOT let children operate bench lid.

Be cautious when moving bench on floor, Lift bench ends to move.

DO NOT STAND ON BENCH SEAT.

Keep hands and fingers

clear of the hinge area

and the bench lid area

when closing the bench lid

hinge area when

folding Bench Lid.

CARE AND USE OF YOUR TABLE

PRODUCT PARTS LISTS

Qty

Description

Part# Qty

Description

Part#

Table Tennis Net

Net Post

Table Tennis Paddle

Table Tennis Ball

Table Tennis Playfield Support

Bench Carpet

5/16’’ x 1-1/4’’ Allen Head Bolt

5/16’’ x 1-3/8’’ Allen Head Bolt

5/16’’ x 3/4’’Flat Washer

5/16’’ x 1/2’’ Lock Washer

Allen Wrench

Main Table Cabinet

“A” Table Tennis Top With

Guide Pins

“B” Table Tennis Top With

Guide Pin Holes

Table Leg

Bench Seat Assembly

Bench Leg

Bench Support

1. Use spray furniture polish to clean all exterior surfaces of your hockey table and

2. Use only a slightly damp soft cloth to clean the table tennis top (do not use

Furniture Polish)

3. This product is intended for INDOOR use only .

4. DO NOT sit, climb or lean on the table.

5. DO NOT drag the table when moving it. This will damage the legs.

6. DO NOT set drinks on the table.

7. The purchase of a table cover will both protect and help keep clean the entire top

of the table.

8. Lastly, using a carpenters level and the leg levelers, level table for best play.

Congratulations! You have now assembled your 3 in1 hockey table. Please note the

Care and Use instructions below to insure many years of trouble free use of your 3 in1

hockey table.

Leg Leveler (Factory Installed)C1 4

Dampener Piston (Factory Installed)C2

Hardware KitK1

Instruction ManualM1

1/2” Phillips Head Hinge Screw (Factory Installed)C3 48

Blower with A/C CordC4 1

Manual Scorer (Factory Installed)C5 2

Striker

Puck

the playfield with the air motor fan running.

This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS

Product (hereinafter referred as the "Product").

This Product is warranted to the original owner, for a period of 90 days from the

original purchase.

ESCALADE SPORTS warrants to the original owner, this product to be free

from defects in material and workmanship when used for the intended purpose under normal use and

conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT,

UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS

PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL

AND WORKMANSHIP.

During the above 90 day warranty period, ESCALADE SPORTS shall

provide replacement components or replace with a comparable product at our choosing. If product is

defective under normal use and proper care, please contact our Customer Service Dept.

Other than shipping requirements no charge will be made for such replacement of in-warranty Products.

Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental

damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which

may vary from state to state.

WARRANTY DURATION:

WARRANTY COVERAGE:

WARRANTY REPLACEMENT:

LEGAL REMEDIES:

1-866-556-2757 / Customer Service Dept.

Or Write us at:

Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706

Attn: Customer Service Dept.

Or E-mail us at:

[email protected]

ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE,

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE

ABOVE 90 DAY PERIOD. ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF

USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,

EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.

WARRANTY DISCLAIMERS:

90 DAY LIMITED WARRANTY

This manual suits for next models

Table of contents

Other ESCALADE Video Gaming Accessories manuals

ESCALADE

ESCALADE American Legend Phazer HT600 User manual

ESCALADE

ESCALADE American Legend MANHATTAN User manual

ESCALADE

ESCALADE ESCORELCD User manual

ESCALADE

ESCALADE AMERICAN LEGEND AL4100 User manual

ESCALADE

ESCALADE Atomic User manual

ESCALADE Atomic G05305W User manual

Popular Video Gaming Accessories manuals by other brands