American legend Al2100w User manual

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Your Model Number ______

________

_____

have your model number when inquiring about parts.

[email protected]

Please

Date Code ___________________________

2 - AL2100F- - HL

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

AL2100W/F

Mailing Address: (Correspondence Only)

Escalade Sports

PO Box 889

Evansville, Indiana 47706-0889

Physical Location:

Escalade Sports

817 Maxwell Ave.

Evansville, Indiana 47711

Make sure you understand the following tips before you begin to assemble your game table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

Assembly Tips

Tools Required:

Allen Wrench (Included)

Furniture Polish and Cloth

Small Phillips Screw Driver to Install Batteries

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE REQUIRED TO ASSEMBLE THIS GAME TABLE.

ATTENTION:

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS 54'' FOOSBALL TABLE

Featuring LED Side Lights

HARDWARE IDENTIFIER

(To Scale)

H1 -

M4 x 27 mm Phillips

Round Head Bolt

(26 pcs)

H5 - M4 Nylock Nut

(26 pcs)

H2 - 6 mm x 110 mm

Allen Head Bolt

(16 pcs)

H7 - 6 mm x 80 mm

Allen Head Bolt

(2 pcs)

Allen Wrench

(1 pc)

(Not to Scale)

H3 - 6.5 mm x 16 mm

Flat Washer

(18 pcs)

T1 - M4

H4- M6 Lock Washer

(18 pcs)

H6 - 3.5 mm x 12 mm

Phillips Round

Head Screw

(8 pcs)

A1- Soccer Ball

(2 pcs)

P9 - 2-Hole

Player Rod

P10 - 3-Hole

Player Rod

P11 - 5-Hole

Player Rod

(2 pcs) (2 pcs)

(4 pcs)

P12 - Manual Scorer

(2 pcs)

ACCESSORIES

RTS IDENTIFIER

IDENTIFIER

(Not to Scale)

P2 - End Leg Support Brace

(2 pcs)(1 pc)

P1 - Main Cabinet P4 - Leg

(4 pcs)

P8 - Ball Entry

Cup (2 pcs)

P5 - Rod Bumper

(16 pcs)

P6 - Player Rod Handle

(8 pcs)

P7 - Player Rod

End Cap

(8 pcs)

P13 - Maroon Player

(13 pcs)

P14 - Black Player

(13 pcs)

P3 - Middle Leg Support Brace

(1 pc)

A2 - 1mm Shim Pack

(3 pcs)

Used to level table if required

A3 - 2mm Shim Pack

(3 pcs)

Used to level table if required

P15- Battery Box with

ON/OFF Switch for LED

(1 pc)

PARTS REQUIRED

1pc - A4 Battery Box 2pcs - H6 Phillips Round Head Screw

Battery Box

Note: Batteries

not included.

Screw

Cover

-Unscrew and remove cover. - Insert 4 AA Batteries

(Batteries not included).

Make sure polarity is correct.

- Return cover and insert Screw.

See” FIRST TIME BATTERY INSTALLATION AND NOTICE “ , before installing batteries, located on page 11.

Remove the screw using a small phillips screwdriver and open the battery box, Insert (4) AA batteries

(not included) in the correct order of polarity as shown on the inside of the battery box. Then close

using the same screwdriver. (If the game will not be used for a long period of the time, we recommend

that the batteries be removed)

P15 Cabinet Frame

3M Tape

Goal Box

- Remove the backing tape and place

the battery box onto the bottom of

Goal Box.

- Screw the battery box onto the Cabinet

Frame using the black point marks and

H6 Phillips Round Head Screws --- DO

NOT strip out screws.

NOTE:ON/OFF Switch

is here for LED Lights.

Carefully install the LED

light wire connectors.

Connectors must be

turned correct to install.

PARTS REQUIRED

12pcs - H2 Hex Head Bolt

12pcs - H3 Flat Washer

12pcs - H4 Lock Washer

1pc - P1 Main Cabinet

4pcs - P4 Leg

PARTS REQUIRED

4pcs - H2 Hex Head Bolt

4pcs - H3 Flat Washer

4pcs - H4 Lock Washer

2pcs - P2 End Leg Support Brace

FIGURE 1

STEP 1

Attach the P4 Legs onto the P1 Main Cabinet

using the H2 Allen Head Bolts, H3 Flat Washers

and H4 Lock Washers as shown in FIGURE 1.

Do not tighten H2 Bolts at this time.

STEP 2

Attach the P2 End Leg Support Brace

onto the P4 Legs using the H2 Allen

Head Bolts, H3 Flat Washers and H4

Lock Washers as shown in FIGURE 2.

Do not tighten H2 Bolts at this time.

FIGURE 2

NOTE: Please note

angled cuts to the ends

P2 and install accordingly.

PARTS REQUIRED

2pcs - H7 Hex Head Bolt2pcs - H3 Flat Washer

2pcs - H4 Lock Washer

1pc - P3 Middle Leg Support Brace

STEP 3

Attach the P3 Middle Leg Support Brace onto the

P2 End Leg Support Braces using the H7 Allen

Head Bolts, H3 Flat Washers and H4 Lock

Washers as shown in FIGURE 3.

Tighten the H2 bolts from STEP 1&2 and H7

bolts using the T1 Allen Wrench.

FIGURE 3

CAUTION: Two strong adults are recommended to flip

the table as shown.

1. Carefully pick up the table on the floor.

2. Turn the table over.

3. Place it on all four legs at the same time onto the floor.

NOTE: Need another

adult to hold the Support

Beam during assembly.

DETAIL B

NOTE: Round for Bolt

Head face this side.

P13

Rod

Bushing Rod Bushing

P10

P13

DETAIL A

NOTE: Round for Bolt

Head face this side.

P5 P14 P5

Rod

Bushing

Rod Bushing

P10

P14

P10

P11

= Black Player

= Marron Player

PARTS REQUIRED

26pcs - H1 Hex Head Bolt

26pcs - H5 Nylock Nut

4pcs - H6 Phillips Round Head Screw

16pcs - P5 Rod Bumper

2pcs - P9 2-Hole Players Rod

4pcs - P10 3-Hole Players Rod

2pcs - P11 5-Hole Players Rod

2pcs - P12 Manual Scorer

13pcs - P13 Maroon Player

13pcs - P14 Black Player

A2,A3

P12

FIGURE 4

Order of Players

(Overhead View)

STEP 4

Slide the P11 5-Hole Rods, P9 2-Hole Rods, P10 3-Hole Rods through Rod Bushing of Side Apron,

P5 Rod Bumper, P13 Maroon Players or P14 Black Players, P5 Rod Bumper and side apron of

cabinet as shown in FIGURE 4, Detail A&B.

Secure the P13 Maroon Players and P14 Black Players onto rods using the H1 Round Head Bolts

and H5 Nylock Nuts as shown in FIGURE 4, DETAIL A&B.

Attach the P12 Manual Scorers to the End Aprons of main cabinet using pilot holes with the H6

Phillips Flat Head Screws as shown in FIGURE 4.

Tighten, but do not strip out screws.

NOTE: Install players onto

Player Rods exactly as per

this diagram for correct

soccer play.

Attach the P8 Ball Entry Cups onto side aprons using pilot holes with the H6 Phillips Round

Head Screws as shown in FIGURE 5, DETAIL C.

Tighten, but do not strip out screws.

Attach the P6 Player Rod Handles and P7 Player Rod End Cap to Player Rods as shown in

FIGURE 5.

Tighten, but do not strip out screws.

PARTS REQUIRED

2pcs - H6 Phillips Round Head Screw

8pcs - P6 Player Rod Handle

8pcs - P7 Player Rod End Cap

2pcs - P8 Ball Entry Cup

NOTE: Correct placement

of Player Rod Handles.

FIGURE 5

STEP 5

DETAIL C

CARE AND USE OF YOUR TABLE

3. This product is intended for INDOOR use only.

4. DO NOT sit, climb or lean on the table.

5. DO NOT drag the table when moving it. This will damage the legs.

Congratulations! You have now assembled your game table. Please note the Care

and Use instructions below to insure many years of trouble free use of your game

table.

6. DO NOT set drinks on the table.

7. The purchase of a table cover will both protect and help keep clean the

Use a carpenters level to properly level the table using the leg shims.

entire top of the table.

Description Qty.

Key # Part #

PRODUCT PARTS LIST FOR MODEL # AL2100W/F

AL2100HLH1

AL2100HLH2

AL2100HLH3

AL2100HLH4

AL2100HLT1

AL2100HLP1

AL2100HLP2

AL2100HLP3

AL2100HLP4

AL2100HLP5

AL2100HLP7

AL2100HLP8

AL2100HLP9

M4 x 27 mm Phillips Round Head Bolt

6 mm x 110 mm Allen Head Screw

6.5mm x 16mm Flat Washer

M6 Lock Washer

M4 Allen Wrench

Main Cabinet

End Leg Support Brace

Middle Leg Support Brace

Leg

Rod Bumper

Player Rod End Cup

Ball Entry Cup

2-Hole Players Rod

H5 AL2100HLH5 M4 Nylock Nut 26

H6 AL2100HLH6 3.5mm x 12mm Phillips Round Head Screw 8

H7 AL2100HLH7 6mm x 80mm Allen Head Bolt 2

P6 AL2100HLP6 Player Rod Handle 8

P10 AL2100HLP10 3-Hole Players Rod 4

P11 AL2100HLP11 5-Hole Players Rod 2

P12 AL2100HLP12 Manual Scorer 2

P13 AL2100HLP13 Maroon Player 13

P14 AL2100HLP14 Black Player 13

P15 AL2100HLP15 Battery Box with ON/OFF Switch for LED 1

AL2100HLA1

AL2100HLA2

AL2100HLA3

Soccer Ball

1mm Shim Pack

2mm Shim Pack

K1 AL2100HLK1 1

M1 AL2100HLM1 1

Hardware Kit

Owner’s Manual

Apply a few drops of lubricant (not provided) to the rods and the bushings.

Rotate rods to make sure you spread lubricant evenly.

2. Use spray furniture polish to clean all exterior surfaces of your soccer table and

the playfield.

This manual suits for next models

Table of contents

Other American Legend Video Gaming Accessories manuals

American Legend

American Legend AL6069F User manual

American Legend

American Legend HT600 User manual

American Legend

American Legend 45-1800W/F User manual

American Legend AL2100W User manual

Popular Video Gaming Accessories manuals by other brands