Allwins AWM50G-X User manual

AWM50G-X
User s Manual
Part Name 802.11b/g PCI-Express Mini Card
Part No. AWM50G-X
Version V1.0

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
RevisionHistory
Release Date Revision Initials
1.0 2009-4-24 Initial release SH

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Table ofContents
1.INSTALLTHE DRIVER-------------------------------------------------------------------------------------------- 5
2.CONNECT-------------------------------------------------------------------------------------------------------------- 8
3.MAKE INFRASTRUCTURE CONNECTION-----------------------------------------------------------------9
4.HELPINFORMATION IN RAUI--------------------------------------------------------------------------------10
5.MAKE AD-HOC MODE CONNECTION----------------------------------------------------------------------10
APPENDIX A: TERMINOLOGY---------------------------------------------------------------------------------- 15
APPENDIX B: IMPORTANTNOTICES-------------------------------------------------------------------------16

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
IMPORTANT NOTE
In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In
these circumstances, the OEMintegrator willbe responsiblefor
re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
Important Information Required By the FCC
The Manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority
to operate the equipment
RF Exposure Statement
To maintain compliance with FCC's RF exposure guidlines, this equipment
should be installed and operated with minimum distance 20 cm between the
radiator and your body: Use only the supplied antenna.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
AWM50G-X User s Manual
1.Install the driver
Step1 Insert the installation CDintoyour CD-ROM driver, Double click the icon
tostart setup.
Step2 Choose Iaccept the terms of the license agreement and click next to go
on.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Step3 Choose Ralink Configuration Tool and click next to go on.
Step4 Choose Optimize for WiFimode and click next to go on.
Step5 Click Install to begin the setup.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Step6 Click Finish to end the setup.
2.connect
Plug in your usb wireless LAN adapter,itwill be recognized and autoinstalled. Just confirmed itlike
below:

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
3.Make infrastructure connection
Double click the icon in red circle
You will see:
You can click the button Rescan to find which AP is in range, theywillshowon
the window.Choice one you want to connect, and click the button connect tofinish
the connection. An infrastructure connection iscompleted.
Note:please choose correctchannelsetting up to your law.For example, ch13
is permitted inyour country,and you setyour router at ch13,whileyou choose ch1-
ch11 (default setting), you will never find the AP. So you should haveto choose ch1-
ch13 in Advanced page as below.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
4.Help information in RaUI
Howto find outwhich WIFI environmentyou are inside :
Howto find outyour IP address:
5.Make Ad-Hoc mode connection
5.1 Make an Ad-Hoc SSID
Step1 Clickthe button Add to makethe Ad-Hoc SSID:

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Step2 Choose the SSID and Network Type as blew,and click OK to go on.
Step3 Clilk the PROF1 in the window and you can see the information ofAd-Hoc SSID.
5.2 Setup static IPaddress for the Ad-Hoc link
Step1 Atits propertypage, double click item Internet Protocol(TCP/IP)

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Step2 You will get:
Step3 Fill the IPaddress blank, example as below:

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Step4 Click OK to finish the setup.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
5.3 Ad-Hoc setup for one point completed.
5.4 Setup another Ad-Hoc point as step a,b,c,d.
5.5 Ad-Hoc mode link accomplished. And you can visit each other.
Note:To make an Ad-Hoc mode link, weshould choice the same channel. Its
static IP address should be inthe same subnet,and the SSID should be the same
too.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Appendix A: Terminology
nad hoc network A network composed solelyof stations within mutual communication range
of each other via the wireless medium(WM).
naccess point (AP) Any entitythathas station functionalityand provides access tothe
distribution ser-vices, via the wireless medium (WM)for associated stations.
nStation (STA) Anydevice thatcontains an IEEE 802.11 conformantmedium access control
(MAC) and physical layer (PHY) interface to thewireless medium(WM).
nRTS (Request To Send) Theframetype used todeign the RTS-CTS clearing exchange.
RTS framesare used when theframe that will be transmitted is larger than the RTS
threshold.
nCTS (Clear To Send) The frametype used toacknowledgereceipt of aRequest to Send
and the second componentused in the RTS-CTS clearing exchange used to prevent
interference fromhidden nodes.
nWEP (Wired Equivalent Privacy) The optional cryptographic confidentialityalgorithm
specifiedbyIEEE 802.11 used toprovide dataconfidentialitythat is subjectivelyequivalent
tothe confidentialityofawiredlocal area network (LAN)mediumthatdoes not employ
cryptographic techniquesto enhance privacy.
nauthentication Theservice used toestablish the identityofone station as amember of the
set ofstations authorized to associate with another station.
nWPA(Wi-Fi Protected Access) Aspecification ofstandards-based,interoperable security
enhancementsthat strongly increase the level ofdataprotectionand access control for
existingand future wireless LAN systems.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
Appendix B: Important Notices
Federal Communications CommissionInterference Statement
This equipment has been tested and found to comply withthelimits for aClass Bdigital device,
pursuant to Part15 ofthe FCC Rules. These limits are designedto provide reasonable
protection againstharmfulinterference in aresidential installation. This equipmentgenerates
usesand can radiate radio frequency energy and, if not installed andused in accordance with
the instructions, maycause harmful interference toradio communications.However,there is no
guarantee that interference to radio or television reception,which canbe determined byturning
the equipmentoffand on,the user is encouraged to try to correct the interference byoneof the
following measures.
- Reorient or relocatethe receiving antenna.
- Increase the separation between the equipmentand receiver.
- Connectthe equipmentinto an outlet on a circuit differentfrom that to which the receiver is
connected.
- Consult the dealer or anexperienced radio/TV technician for help.
This device complies withPart 15 of the FCC Rules. Operation is subject to the followingtwo
conditions: (1) This device maynotcause harmful interference, and (2) this device must accept
any interference received,including interference that maycause undesired operation.
FCC Caution: Anychanges or modifications not expressly approved bythe partyresponsible for
compliance could void the user's authorityto operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipmentshouldbe installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating inconjunction with anyother
antenna or transmitter.

AWM50G-X User sManual
Shenzhen Allwins Technology CorporationAdd:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
Tel:+86-755-2603080026030361 26030362260630363 Fax:[phone] Http://www.allwins.com.cn
This device is intended onlyfor OEMintegrators under the
following conditions:
The antenna mustbe installed such that20 cm ismaintained between the antenna
and users,and The transmitter module maynot be co-located withanyother
transmitter or antenna.As longas 2conditions above are met, further transmitter test
will not be required.However,the OEM integrator is stillresponsible for testingtheir
end-product for anyadditional compliance requirementsrequired with this module
installed (for example, digital device emissions,PC peripheral requirements,etc.).
IMPORTANTNOTE:In the eventthat these conditions can notbe met(for
example certainlaptop configurations or co-location with another transmitter),then
the FCC authorization isno longer considered valid and the FCCIDcan notbe used
on the final product.In these circumstances, the OEM integrator willbe responsible
for re-evaluating the end product (includingthe transmitter) and obtaining aseparate
FCC authorization.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received including interference that may cause undesired
operation.