Alphatron EVF-035W-3G User manual

Electronic Viewnder
OperationManual_v1.6
EVF-035W-3G

Electronic Viewnder 3
Contents
1. Caution
2. Components
3. Main Features
4. Controls & Functions
5. Menu Tree & Adjustment
6. Menu Operations
[1] Picture
[2] Color
[3] Marker
[4] Error Check
[5] Audio
[6] Display & Set
[7] System
7. Other Functions
8. Product Specications
9. Warranty Registration
04
06
07
08
10
15
15
16
17
18
19
20
21
22
27
28
FCC(FederalCommunicationsCommission)
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforclassAdigitaldevice,pursuanttopart15
oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterfacewhenthe
equipmentisoperatedinacommercialenvironment.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyandifnotinstalledandusedin
accordancewiththeinstructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationof
thisequipmentinaresidentialtocorrecttheinterferenceathisownexpense
CAUTION:Changeormodificationsnotexpresslyapprovedbythemanufacturerresponsibleforcompliance
couldvoidtheuser’sauthoritytooperatetheequipment.
DisposalofOldElectrical&ElectronicEquipment
(ApplicableintheEuropeanUnionandotherEuropeancountrieswithseparatecollectionsystems)
Thissymbolontheproductoronitspackingindicatesthatthisproductshallnotbetreatedashousehold
waste.Insteaditshallbehandedovertotheapplicablecollectionpointfortherecyclingofelectricaland
electronicequipment.Byensuringthisproductisdisposedofcorrectly,youwillhelppreventpotentialnegative
consequencefortheenvironmentandhumanhealth,whichcouldotherwisebecausedbyinappropriatewaste
handlingofthisproduct.Therecyclingofmaterialswillhelptoconservenaturalresources.
.............................................................................
.....................................................................
...................................................................
...........................................................
......................................................
...............................................................
.........................................................................
...........................................................................
.........................................................................
...................................................................
...........................................................................
.................................................................
.........................................................................
..................................................................
.........................................................
..........................................................

4 Electronic Viewnder
1. Caution
•Always use set voltage. (DC 6.8-12V)
•D-tap to mini XLR connection.
• All operating instructions must be read and
understood before the product is operated.
These safety and operating instructions must
be kept in safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
• This product must be operated on a power
source specied on the specication label.
• If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• In case of using other DC adapters instead
of the standard adapter provided by the
manufacturer, please check the proper load
capacity (or current capacity) and use an
adapter with stable voltage.
• Do not overload DC outlets or extension cords.
Overloading can cause or electric shock.
• Never insert an object into the product
through vents or openings. High voltage in the
product, and inserting an object can cause
electric shock and/or short internal parts. For
the same reason, do not spill water or liquid on
the product.
• Do not attempt to service the product yourself.
Removing covers can expose you to high
voltage and other dangerous conditions.
Request a qualied service person to perform
servicing.
• If any of the following conditions occurs,
unplug the power cord from the DC outlet, and
request a qualied service person to perform
repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operating instructions.
Do not touch the controls other than those
described in the operating instructions.
Improper adjustment of controls not described
in the instructions can cause damage,
which often requires extensive adjustment
work by a qualied technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality in the
product indicates that the product needs
servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specied by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in re, electric
shock and/or other danger.
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.

Electronic Viewnder 5
1. Caution
• Unplug the power cord from the DC outlet
before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
• Keep the product away from direct rays of the
Sun-light.
• Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to
follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a cart, it
must be moved with the utmost care.
• Sudden stops, excessive force and uneven
oor surface can cause the product to fall from
the cart.
• The vents and other openings in the
cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insucient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the
manufacturer’s instructions are followed.
• The LCD panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the LCD panel breaks.
• Keep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including ampliers).
• Risk of explosion if battery is replaced by and
incorrect type.
Dispose of used batteries according to the
instructions.
• The magnication lens in the viewnder may
also magnify tiny dusts on the LCD screen
which may look like defects of the LCD panel.
Please wipe out or blow o the dusts on the
screen before using the EVF-035W-3G.
• To avoid scratches on the LCD screen please
only blow o the dust and don’t use a cloth
or ngers to clean the screen.

6 Electronic Viewnder
2. Components
EVF-035W-3G Camera Mount x 2
Operation ManualD-Tap Cable
DC Power Adapter (Option) AC Power Cord (Option)
OperationManual_v0
.
1
EVF-035W-3G

Electronic Viewnder 7
• SDI signal compatibility
- This product is compatible with various SDI
signals - SD/HD/3G(A/B)-SDI 480i, 576i, 1080i,
1080p, 1080psf
• HDMI signal compatibility
- Supports HDMI(w/ HDCP) input is available
without any other accessory.
• HDMI To HDMI Active Loop Throughout
- Supports HDMI-To-HDMI Active Loop
Throughout function.
• Compact and powerful
- Compact size for best space utilization
and powerful features that requires no other
accessories
• Wide Screen / Wide Viewing Angle
•Rotary Control
- Easy to adjust user conguration using the
Rotary control on the left side of the
viewnder.
•BLUE ONLY/MONO/Focus Assist/H/V Delay
Function
•Range Error/Luma(Y’) Zone Check (Color/
Zebra Type) Function
•Internal Pattern Generator (0~100% Gray/
ColorBar+Pluge)
•Markers & Safety Areas
- Center Marker, Safety Area Marker, Aspect
Marker, Display Size(Scan)
•HDMI-SDI Active Loop Through-out
•Pixel To Pixel/Zoom mode
- Used to display the original image resolution
without scaling to match a certain resolution
or an aspect ratio.
- Select ‘Pixel to pixel’ to display unscaled
images, and select ‘Zoom’ to enlarge the
original image.
- Zoom Scroll Function (Left/Right,Top/Bottom)
•Power
- Basically, the product is powered by normal
DC source.
- The product can be battery-powered.
*DC 6.8V ~ 12V
*D-tap to mini XLR connection.
•Additional features
- 3 Camera Mounting Holes, Luminance of
500cd/m2, Contrast Ratio of 1000 : 1,
OSD user interface
EVF-035W-3G Monitor contains the following features:
3. Main Features

8 Electronic Viewnder
EYECUP
SHUTTER
CONTROL
PART
MAGNET
CAMERA MOUNT
POWER
BUTTON
POWER
LED
SUN HOOD
FOCUSING
WHEEL
BATTERY
LOCK
LOCK
BUTTON
EXTERNAL
POWER
CAMERA
MOUNT
CALIBRATION
PGM
(Firmware Update)
SDI IN/OUT HDMI IN/OUT
BATTERY
COVER
I/O PORT
SHUTTER
WHEEL FOCUSING
WHEEL
CAMERA
MOUNT
F1
F2
F3
UP/DOWN
ENTER
F4
EVF-035W-3G
4. Control & Functions

Electronic Viewnder 9
•[F1](SCAN) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F1 Key”
menu.
- Default setting of F1 Button is Scan Mode.
• [F2](ASPECT) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F2 Key”
menu.
- Default setting of F2 Button is Aspect.
•[F3](MARKER) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F3 Key”
menu.
- Default setting of F3 Button is Marker Enable.
•[F4](L(Y’)ZoneCheck) Button
- This Functions button is used to activate the
feature selected in “DISPLAY & SET – F4 Key”
menu.
- Default setting of F4 Button is L(Y’)Zone
Check.
•[MENU<EXIT>/SOURCE] Button
- Press the button for less than 2 seconds to
activate the main OSD menu.
- Used to return from sub menu to main menu.
- Press the button for more than 2 seconds to
change the Input Signal. (SDI <--> HDMI)
(SDI, HDMI)
•[UP/DOWN/ENTER] Rotary Control
- When OSD menu is inactivated, press
the Rotary Control to adjust the value of
Brightness, Contrast, Chroma or Aperture.
- Also the Rotary Control is used to decrease or
increase the value of the selected feature.
• [CAL.]
- This terminal is for rmware upgrade or color
calibration by using the Tool made by TVLogic.
• [USB] Port
- Used to update new program for future
enhancements.
•[SDI-IN] (BNC)
- Signal input terminal for SD/HD SDI.
•[SDI-OUT] (BNC)
- SD/HD-SDI Signal Output which is input
through [SDI-IN] terminal.
•[HDMI] IN
- Signal input terminal for HDMI signal.
•[HDMI] OUT
- Signal output terminal for HDMI signal.
• BATTERY IN
- Battery Power Input : DC 6.8 ~12V
*Rated Power Input : DC 6.8 ~ 18V
* D-Tap to mini XLR connection.
•DC POWER IN (Mini XLR 4P)
- DC power input terminal for DC 12V.
<Warning!!>
When using the product make sure to ground
the product before connecting the input
signal line. The unit may not operate properly
if the input line is connected before the GND is
connected.
4. Control & Functions
SIDE BOTTOM/REAR

10 Electronic Viewnder
Brightness
Contrast
Chroma
Aperture
Scan Mode
Aspect
3G Format
DSLR Camera
DSLR Scale
Rotary Lock
0
0
0
0
Over
16:9
Normal
CANON 5D/7D
Playback
Unlock
P I C T U R E
• User may control various functions
using MENU button and the Rotary Control
on the side of the monitor.
• OSD(On-Screen Display) Menu helps you
use various functions.
• This Picture is the menu structure for
EVF-035W-3G
1. Press MENU button to activate the OSD menu.
2. Move to a desired menu by rotating the rotary
control.
3. Press the Rotary Control to select a menu
and move to select a sub-menu by rotating
the Rotary Control.
4. Press the Rotary Control to select the desired
sub menu. (The selected sub-menu will be
highlighted)
5. Press ENTER button or MENU button to
save the new value after adjusting the value
by rotating the Rotary Control.
6. Press MENU button to return to previous
menu and if there is no previous menu, the
OSD menu will be removed from the screen.
[1] Menu Structure [3] Menu Control Sequence
[2] Menu Control
5. Menu Tree & Adjustment

Electronic Viewnder 11
[4] Menu Tree
5. Menu Tree & Adjustment
PICTURE COLOR
Brightness -100 ~ +100
Color Temp
3200K
5600K
6500K
9300K
User1
User2
User3
Contrast -100 ~ +100
Chroma 50 ~ +50 Gain Red -128 ~ +127
Aperture (Sharpness) 25 ~ +25 Gain Green -128 ~ +127
Scan Mode
Zero
Over
Pixel To Pixel
User
Gain Blue -128 ~ +127
Bias Red -128 ~ +127
Aspect
16:9
4:3
2.35:1
1.85:1
15:9
16:10
Auto
Bias Green -128 ~ +127
3G Format
Normal
A444 10B_YCbCr
A444 10B_RGB
A444 12B_YCbCr
A444 12B_RGB
A422 12B_YCbCr
B444 10/12B_YCbCr
B444 10/12B_RGB
B444 12B_YCbCr
B444 10B_YCbCr/P
Bias Blue -128 ~ +127
Color Copy
3200K
5600K
6500K
9300K
User1
User2
User3
DSLR CAMERA
CADNON 5D/7D
SONY A77
NIKON D7000
DSLR Scale
Playback
Live/REC Full
Live/REC 16:9
Rotary Lock Unlock
Lock

12 Electronic Viewnder
MARKER
Marker Enable O󰘯
On Marker Color
White
Gray
Black
Red
Green
Blue
Marker Type
O󰘯
16:9
4:3
4:3 ON AIR
15:9
14:9
13:9
1.85:1
2.35:1
1.85:1 & 4:3
User
Marker Thickness 1~6
Center Marker O󰘯
On User Marker H1 1~960
Safety Area
O󰘯
80%
85%
88%
90%
93%
100%
EBU Action 16:9
EBU Graphic 16:9
EBU Action 14:9
EBU Graphic 14:9
EBU Action 4:3
EBU Graphic 4:3
User Marker H2 1~960
Fit Marker O󰘯
On User Marker V1 1~640
Marker Mat O󰘯
1 ~ 7 User Marker V2 1~640
[4] Menu Tree
5. Menu Tree & Adjustment

Electronic Viewnder 13
ERROR CHECK AUDIO
L(Y’)Zone Check
O󰘯
Color
Zebra
Level Meter
O󰘯
16CH Hor
16CH Ver
L(Y’)Zone Adjust 0 ~ 100 Lv Meter Disp Pair
Group
Range Error O󰘯
On Lv Meter Ref -18dB -20dB
Y’ Max 0 ~ 255 Lv Meter Size Small
Large
Y’ Min 0 ~ 255 Peak Decay Time 0 ~ 100
C Max 0 ~ 255
C Min 0 ~ 255
Y’ Pic Blink O󰘯
On
C Pic Blink O󰘯
On
[4] Menu Tree
5. Menu Tree & Adjustment

14 Electronic Viewnder
DISPLAY & SET SYSTEM
System Default No
Yes RS -232 Type Upgrade Calibration
Back Light 0 ~ 100 HDMI To SDI O󰘯
On
Int Pattern
O󰘯
Color + Pluge
Gray 0% ~ 100%
FPGA :
MCU :
Time Code
O󰘯
VITC
LTC
Focus Assist
O󰘯
Mono On
Color On
F/A Color
Red
Green
Blue
F/A Level 0 ~ 100%
F1 Key Scan Mode
Aspect
Marker Enable
L(Y’)Zone Check
Range Error
Audio Level Meter
Time Code
Focus Assist
Blue Only
F2 Key
F3 Key
F4 Key
[4] Menu Tree
5. Menu Tree & Adjustment

Electronic Viewnder 15
0
0
0
0
Over
16:9
Normal
CANON 5D/7D
Playback
Unlock
P I C T U R E
•Brightness
- Used to set the brightness(=oset) level from
-100 to 100.
•Contrast
- Used to set the contrast(gain) level from
-100 to 100.
•Chroma
- Used to set the saturation level from -50 to 50.
•Aperture (Sharpness)
- Used to set the sharpness level from -25 to 25.
•Scan Mode
- Used to change the Scan mode. Scroll up
and down the Rotary Control and the mode
will be changed as the following sequence.
[Over Scan] -> [Zero Scan] -> [User] ->[Pixel-
To-Pixel]
* See section “6. Other Functions -> [1] Pixel to
Pixel and [2] User Aspect” for more
information.
• ASPECT
- Used to change Aspect Ratio.
- The Aspect Modes are changed as the following
sequence. : 4:3, 16:9, 15:9, 1.85:1, 2.35:1
- When the original Aspect ratio of the Input
Signal is 16:9, the Aspect Mode is xed as 16:9.
6. Menu Operations
[1] PICTURE
Brightness
Contrast
Chroma
Aperture
Scan Mode
Aspect
3G Format
DSLR Camera
DSLR Scale
Rotary Lock
•3G Format
- Used to select 3G-SDI A/B input format
among NORMAL MODE(AUTO - A 422 10BIT_
YCbCr 50/60P), A 444 10/12BIT_YCbCr, A 444
10/12BIT_RGB, A 422 12BIT_YCbCr, B 444
10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422
12BIT_YCbCr, B 422 10BIT_YCbCr 50/60P.
- In NORMAL MODE, automatically detected
when Payload signal is contained.
•DSLR Camera
- Select the DSLR camera to be used with EVF-
035W-3G . Available models are [CANON
5D/7D], [SONY A77] and [NIKON D7000].
*DSLR cameras’ screen size and aspect ratio
of Live / Record / Playback modes vary
according to their manufacturer.
•DSLR SCALE (HDMI Format Only)
- This is a special function for CANON/NIKON/
SONY DSLR cameras.
- Used to scale the image with dierent
resolution as to the operation mode(Playback,
Live/REC Full, Live/REC 16:9) of the camera to
fullll the screen.
*See section “6. Other Functions [7] DSLR
SCALE” for more information.
•Rotary Lock
- Locks the Rotary control.

16 Electronic Viewnder
Color Temp
Gain Red
Gain Green
Gain Blue
Bias Red
Bias Green
Bias Blue
Color Copy
6500K
0
0
0
0
0
0
6500K
C O L O R
•Color Temp.
- Controls color temperature and allows instant
access to preset color temperature settings.
- Available color temperatures are 3200K,
5600K, 6500K, 9300K and User 1/2/3.
- In User 1/2/3 modes, user can dene custom
RGB GAIN and BIAS (=Oset) values.
•Gain Red/Green/Blue
- Used to set R/G/B Gain(or Picture, Contrast)
level from -128 to 127.
# Only available in User 1/2/3 mode.
•Bias Red/Green/Blue
- Used to set R/G/B Bias(or Oset, mainly
aects on Black level) from -100 to 100.
# Only available in User 1/2/3 mode.
•Color Copy
- Used to copy the R/G/B Gain value of pre-
stored color temperature settings.
- In User mode, nd and select the color
temperature and press Enter button to copy
and apply the Gain value to GAIN RED, GAIN
GREEN, GAIN BLUE.
# Only available in User 1/2/3 mode.
6. Menu Operations
[2] COLOR

Electronic Viewnder 17
Marker Enable
Marker Type
Center Marker
Safety Area
Fit Marker
Marker Mat
Marker Color
Thickness
User Marker H1
User Marker H2
User Marker V1
User Marker V2
Off
Off
Off
Off
Off
Off
White
1
1
960
1
640
M A R K E R
MARKER : 4:3
SAFETY AREA : 90%
FIT MARKER : OFF
MARKER : 4:3
SAFETY AREA : 90%
FIT MARKER : ON
•Marker Enable
- Used to activate the Marker function.
- Available marker types are OFF, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3 and USER.
•Marker Type
- Used to select the marker type.
- Available marker types are OFF, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3 and USER.
•Center Marker
- Displays the Center Marker on the screen.
•Safety Area
- Used to select to display and controls the size
and availability of the Safety Area.
- Available sizes are 80%, 85%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9,
EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU
ACTION 4:3 and EBU GRAPHIC 4:3.
•Fit Marker
- Used to activate or inactivate the Fit Marker
function.
- When the Marker type is selected in the
Marker menu, a border line of the Safety Area
will be displayed inside the Marker. Images
below show the dierence between Fit
Marker ON and OFF.
•Marker Mat
- Used to set the darkeness level outside of the
MARKER area from OFF(transparent) to 7(Black).
- The bigger the value, the darker the color.
•Marker Color
- Used to set the color of the MARKER lines.
- Available colors are white, gray, black, red,
green and blue.
•Thickness
- Used to set the thickness of the MARKER lines.
- Thickness level is from 1 to 7 by the pixel unit.
•USER Marker H1
- Used to set the position of the rst horizontal
marker line.
- Displayed when MARKER menu is set to USER.
•USER Marker H2
- Used to set the position of the second
horizontal marker line.
- Displayed when MARKER menu is set to USER.
•USER Marker V1
- Used to set the position of the rst vertical
marker line.
- Displayed when MARKER menu is set to USER.
•USER Marker V2
- Used to set the position of the second vertical
marker line.
- Displayed when MARKER menu is set to USER.
6. Menu Operations
[3] MARKER

18 Electronic Viewnder
L(Y’)Zone Check
L(Y’)Zone Adj
Range Error
Y’ Max
Y’ Min
C Max
C Min
Y’ Pic Blink
C Pic Blink
Off
75%
Off
255
0
255
0
Off
Off
E R R O R C H E C K •Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in WaveForm/VECTOR.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN shall blink.
* See section “6. Other Function [5] Range
Error” for more information.
• Y’ Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen.
•Y’ Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen.
•C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the max C’ level
will blink in the screen.
•C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen.
•Y Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
•C Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
•L (Y’) Zone Check (Luma Zone Check)
- Displays the Luma(Y’) level of the input image
with specic colors.
- Each pixel’s Y’ is analyzed and changed to a
specic color according to the Index
on the right side of the screen.
* See section “6. Other Function [3] L(Y’)Zone
Check” for more information.
- When a pixel’s Y’ level is under 0%(16), the
color /diagonal line will be colored Green.
- When the pixel’s Y’ level is over 100%(235),
the color / diagonal line will be colored Red.
- When the Y’ level of a pixel is between
0~100%, the pixel is displayed with Gray,
except for selected Luma Zone.
- A 5% zone of the selected Y’ level will be
colored Pink(5%) and ±10% will be colored
Yellow(-10% from Pink) and Cyan(+10% from
Pink).
•L (Y’) Zone Adj. (Luma Zone Adjust)
- Used to set the Y’ level to be colored Yellow,
Pink and Cyan simply by scrolling the Rotary
Control.
- Available values are 0 ~ 100%.
6. Menu Operations
[4] ERROR CHECK

Electronic Viewnder 19
Level Meter
Lv Meter Disp
Lv Meter Ref
Lv Meter Size
Peak Decay Time
Off
Pair
-18d B
Small
0
A U D I O
6. Menu Operations
•Level Meter
- Used to set the Level Meter for the embedded
audio.
- Available options are OFF, 16 CH(HOR.) and
16 CH(VER.)
* 16 CH(HOR.) : Displays 8 channels on top
left and 8 channels on top right of the screen
horizontally.
* 16 CH(VER.) : Displays 8 channels on center
left and 8 channels on top right of the screen
vertically.
•Lv Meter Disp (Level Meter Display)
- Used to set the display method for audio level
meter.
- Available modes are GROUP and PAIR.
•Lv Meter Ref (Level Meter Reference)
- Display the default audio level meter value.
Available options are -18dB and -20dB.
- Audio level meter within selected value
turns to green and exceeded audio level is
displayed in yellow. Audio level exceeding
-4dB is displayed in red.
•Level Meter Size
- Used to control the size of the audio level
meters.
- Available options are NORMAL and LAGRE.
•Peak Decay Time
- Sets the reduction time for max value
indication of audio signals.
- Control range is from MIN 0 to MAX 100.
- Bigger number means a longer display time
for max value.
[5] AUDIO

20 Electronic Viewnder
6. Menu Operations
System Defauit
Back Light
Int Patern
Time Code
Focus Assist
F/A Color
F/A Level
F1 Key
F2 Key
F3 Key
F4 Key
No
0
Off
Off
Off
Red
0%
ScanMode
Aspect
Marker Enable
L(Y‘)ZoneCheck
D I S P L A Y & S E T •F/A COLOR
- Used to select a color for FOCUS ASSIST
among red, green and blue.
•F/A LEVEL
- Used to set the edge dierence value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
dierence of the edges exceeds the
previously set value.
- This feature is available only when the FOCUS
ASSIST mode is activated.
•F1 Key
- User can select the function for [F1] Key.
- Selectable Items : Scan Mode, Aspect, Marker
Enable, L(Y’) Zone Check, Range Error, Audio
Level Meter, Time Code, Focus Assist, BLUE
ONLY, DSLR Scale and O.
•F2 Key
- User can select the function for [F2] Key.
- Selectable Items : Scan Mode, Aspect, Marker
Enable, L(Y’) Zone Check, Range Error, Audio
Level Meter, Time Code, Focus Assist, BLUE
ONLY, DSLR Scale and O.
•F3 Key
- User can select the function for [F3] Key.
- Selectable Items : Scan Mode, Aspect, Marker
Enable, L(Y’) Zone Check, Range Error, Audio
Level Meter, Time Code, Focus Assist, BLUE
ONLY, DSLR Scale and O.
•F4 Key
- User can select the function for [F4] Key.
- Selectable Items : Scan Mode, Aspect, Marker
Enable, L(Y’) Zone Check, Range Error, Audio
Level Meter, Time Code, Focus Assist, BLUE
ONLY, DSLR Scale and O.
•System Default
- Used to initialize OSD values to factory
default.
•Back Light
- Used to indicate the backlight level.
- In case of System Default, the value returns to
factory default(after color calibration).
- Available values are from 0 to 50.
•Int Pattern (Internal Pattern)
- Generates ColorBar, Pluge and Grayscale
Pattern internally.
- Selectable range for Gray Pattern is from 0%
to 100% with 5% increment.
*See section “6. Other Function -> [6] Iternal
Pattern” for more information.
•Time Code
- Used to display the Time Code.
- Available modes are VITC, LTC and OFF.
•Focus Assist
- Focus Assist helps the shooters to easily nd
out the exact area in the picture with good
focus, simply by adding colors on the shape
or boundaries of the object in the picture.
- Available modes are Mono and Color.
*See section “6. Other Function -> [4] Focus
Assist” for more information.
[6] DISPLAY & SET