Alpina E300 User manual
IT
Tosaerba elettrico con conducente a piedi
MANUALE DI ISTRUZIONI
ATTENZIONE: prima di usare la macchina, leggere attentamente il presente libretto.
BG
Електрическа косачка с изправен водач
ВНИМАНИЕ: преди да използвате машината прочетете внимателно настоящата книжка.
BS
Električna kosilica na guranje
UPUTSTVO ZA UPOTREBU
PAŽNJA: prije nego što koristite ovu mašinu, pažljivo pročitajte priručnik s uputama.
CS
Elektrická sekačka se stojící obsluhou
UPOZORNĚNÍ: před použitím stroje si pozorně přečtěte tento návod k použití.
DA
Elektrisk plæneklipper betjent af gående personer
BRUGSANVISNING
ADVARSEL: læs instruktionsbogen omhyggeligt igennem, før du tager denne maskine i brug.
DE
Handgeführter elektrisch betriebener Rasenmäher
GEBRAUCHSANWEISUNG
ACHTUNG: vor inbetriebnahme des geräts die gebrauchsanleitung aufmerksam lesen.
EL
Ηλεκτρική χλοοκοπτική μηχανή με όρθιο χειριστή
ΠΡΟΣΟΧΗ: πριν χρησιμοποιησετε το μηχανημα, διαβαστε προσεκτικα το παρον εγχειριδιο.
EN
Pedestrian-controlled walk-behind electrically powered lawn mower
OPERATOR’S MANUAL
WARNING: read thoroughly the instruction booklet before using the machine.
ES
Cortadora de pasto eléctrica con operador de pie
MANUAL DE INSTRUCCIONES
ATENCIÓN: antes de utilizar la máquina, leer atentamente el presente manual.
ET
Seisva juhiga elektriline muruniitja
KASUTUSJUHEND
TÄHELEPANU: enne masina kasutamist lugeda tähelepanelikult antud kasutusjuhendit.
FI
Kävellen ohjattava sähkökäyttöinen ruohonleikkuri
KÄYTTÖOHJEET
VAROITUS: lue käyttöopas huolellisesti ennen koneen käyttöä.
FR
Tondeuse à gazon fonctionnant sur le réseau et à conducteur à pied
MANUEL D’UTILISATION
ATTENTION: lire attentivement le manuel avant d’utiliser cette machine.
HR
Električna ručno upravljana kosilica trave
POZOR: prije uporabe stroja, pažljivo pročitajte ovaj priručnik.
HU
Gyalogvezetésű elektromos fűnyírógép
FIGYELEM! a gép használata előtt olvassa el figyelmesen a jelen kézikönyvet.
LT
Pėsčio operatoriaus valdoma elektrinė vejapjovė
NAUDOJIMO INSTRUKCIJOS
DĖMESIO: prieš naudojant įrenginį, atidžiai perskaityti šį naudotojo vadovą.
LV
No elektrotīkla darbināma no aizmugures ejot vadāma zāliena pļaujmašīna
LIETOŠANAS INSTRUKCIJA
UZMANĪBU: pirms aparāta lietošanai rūpīgi izlasiet doto instrukciju.
MK
Тревокосачка на струја со оператор на нозе
ВНИМАНИЕ: прочитајте го внимателно ова упатство пред да ја користите машината.
NL
Lopend bediende elektrische grasmaaier
GEBRUIKERSHANDLEIDING
LET OP: vooraleer de machine te gebruiken, dient men deze handleiding aandachtig te lezen.
NO
Håndført elektrisk drevet gressklipper
INSTRUKSJONSBOK
ADVARSEL: les denne bruksanvisningen nøye før du bruker maskinen.
171505829/6 09/2020
E300
E320
E380
PL
Kosiarka elektryczna prowadzona przez operatora pieszego
OSTRZEŻENIE: przed użyciem maszyny, należy uważnie przeczytać niniejszą instrukcję.
PT
Corta-relvas elétrico para operador apeado
MANUAL DE INSTRUÇÕES
ATENÇÃO: antes de usar a máquina, leia atentamente o presente manual.
RO
Maşină electrică de tuns iarba cu conducător pedestru
ATENŢIE: înainte de a utiliza maşina, citiţi cu atenţie manualul de faţă.
RU
Электрическая газонокосилка с пешеходным управлением
ВНИМАНИЕ: прежде чем пользоваться оборудованием, внимательно прочтите зто
руководство по зксплуатации.
SK
Elektrická kosačka so stojacou obsluhou
UPOZORNENIE: pred použitím stroja si pozorne prečítajte tento návod.
SL
Električna kosilnica za stoječega delavca
POZOR: preden uporabite stroj, pazljivo preberite priročnik z navodili.
SR
Električna kosačica na guranje
PAŽNJA: pre korišćenja mašine pažljivo pročitati ovaj priručnik.
SV
Eldriven förarledd gräsklippare
BRUKSANVISNING
VARNING: läs igenom hela detta häfte innan du använder maskinen.
TR
Arkadan ayak kumandalı elektrikli çim biçme makinesi
KULLANIM KILAVUZU
DİKKAT: makıneyı kullanmadan önce talımatlar ıçeren kilavuzu dıkkatle okuyun.
ITALIANO - Istruzioni Originali ................................................................................................... IT
........................................................................... BG
BOSANSKI - Prijevod originalnih uputa ........................................................................................ BS
......................................................................... CS
DANSK - Oversættelse af den originale brugsanvisning .............................................................. DA
DEUTSCH - Übersetzung der Originalbetriebsanleitung .............................................................. DE
..................................................................... EL
ENGLISH - Translation of the original instruction .......................................................................... EN
ESPAÑOL - Traducción del Manual Original ................................................................................ ES
..................................................................................... ET
.................................................................................... FI
FRANÇAIS - Traduction de la notice originale .............................................................................. FR
HRVATSKI - Prijevod originalnih uputa ......................................................................................... HR
........................................................................... HU
............................................................................... LT
................................................................... LV
............................................................... MK
................................................... NL
........................................................... NO
................................................................................ PL
............................................................................... PT
............................................................................ RO
..................................................................... RU
............................................................... SK
...................................................................................... SL
SRPSKI - Prevod originalnih uputstva ........................................................................................... SR
.................................................................. SV
.................................................................................... TR
41
42
44
45
20 21 22
6 1104
23 75
8
9
10a
1.1a
E 300
I
1.1b
1.2
E 320
E 380
II
III
1
2
2.1
3.1
3.3
2.2
3.2
3.4
4.1 4.2
DATI TECNICI E300 E320 E380
1 1 1,4
-1
7,5 8,7
Tensione e frequenza
V / Hz
Livello di pressione acustica
dB(A)
dB(A) 80
0,85 81
82
Livello di potenza acustica
dB(A)
dB(A) 91,87
0,70 90,8
1,88
2,06
Livello di potenza acustica
garantito dB(A)
Livello di vibrazioni
2
20,7
0,98 1,6
0,98 1,9
0,98
- lunghezza
- larghezza
- altezza
1200
1050
1200
1000
400
960
- GEBAO
- GGP
J2420000090R
118810001/0
118810002/0 J2420000084R
Accessori - - -
Kit “Mulching” - - -
[1] BG - ТЕХНИЧЕСКИ ДАННИ
[1] BS - TEHNIČKI PODACI
[8] Mjerna nesigurnost
[11] Razina vibracija
[1] CS - TECHNICKÉ PARAMETRY
stroje.
[1] DA - TEKNISKE DATA
[6] Klippebredde
[11] Vibrationsniveau
[12] Mål (længde/bredde/højde)
[14] Tilbehør
• For disse data henvises til hvad
[1] DE - TECHNISCHE DATEN
[5] Versorgungsspannung und -frequenz
[6] Schnittbreite
[10] Garantierter Schallleistungspegel
[11] Vibrationspegel
[15] “Mulching-Kit”
[1] EL - ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
[1] EN - TECHNICAL DATA
[7] Acoustic pressure level
[11] Vibration level
• Please refer to the data indicated on
[1] ES - DATOS TÉCNICOS
[11] Nivel de vibraciones
[14] Accesorios
[15] Kit para “Mulching”
[1] ET - TEHNILISED ANDMED
[5] Toite pinge ja sagedus
[11] Vibratsioonide tase
[1] FI - TEKNISET TIEDOT
[9] Mitattu äänitehotaso
[10] Taattu äänitehotaso
[11] Tärinätaso
[14] Lisävarusteet
laitteen tunnuslaatassa annettuihin
tietoihin.
[1] FR - CARACTÉRISTIQUES TECHNIQUES
[6] Largeur de coupe
[7] Niveau de pression acoustique
[10] Niveau de puissance acoustique garanti
[11] Niveau de vibrations
[15] Kit “Mulching”
[1] HR - TEHNIČKI PODACI
[8] Mjerna nesigurnost
[11] Razina vibracija
[1] HU - MŰSZAKI ADATOK
[1] LT - TECHNINIAI DUOMENYS
[14] Priedai
[1] LV - TEHNISKIE DATI
[1] MK - ТЕХНИЧКИ ПОДАТОЦИ
[1] NL - TECHNISCHE GEGEVENS
[5] Spanning en frequentie voeding
[6] Maaibreedte
[11] Niveau trillingen
[14] Toebehoren
[15] Kit “Mulching”
[1] NO - TEKNISKE DATA
[6] Klippebredde
[11] Vibrasjonsnivå
[14] Tilbehør
[15] Mulching-sett
[1] PL - DANE TECHNICZNE
[1] PT - DADOS TÉCNICOS
altura)
[14] Acessórios
[15] Kit “Mulching”
[1] RO - DATE TEHNICE
[14] Accesorii
[1] RU - ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
[1] SK - TECHNICKÉ PARAMETRE
[1] SL - TEHNIČNI PODATKI
napajanja
[6] Širina reza
[8] Merilna negotovost
[11] Nivo vibracij
[1] SR - TEHNIČKI PODACI
[8] Merna nesigurnost
[11] Nivo vibracija
[1]
SV - TEKNISKA SPECIFIKATIONER
[11] Vibrationsnivå
[1] TR - TEKNİK VERİLER
1
SAFETY REGULATIONS
please follow meticulously
A) TRAINING
-
-
-
-
-
-
-
-
-
B) PRELIMINARY OPERATIONS
-
-
-
bones, etc.).
done at a specialised centre.
neutral position, resulting in the stopping of the cutting
EN WARNING: READ THOROUGHLY THE INSTRUCTION BOOKLET BEFORE
USING THE MACHINE. Keep for future reference
-
CABLE BEFORE DISCONNECTING IT FROM THE MAINS
parts.
catcher, side discharge guard or rear discharge guard).
C) DURING USE
-
-
-
-
stacles before and during operations in reverse gear.
roads.
discharge guards.
15) Keep both hands on the grip during ignition.
grass.
-
tor is running.
before ignition.
2
installed in their seats.
– Before adjusting the cutting height, if this operation can
-
-
-
D) MAINTENANCE AND STORAGE
relevant instructions. Wear proper clothing and protective
-
-
-
-
-
-
-
obligations and responsibilities of the Manufacturer.
-
-
-
ened on a regular basis.
-
-
-
-
specialised centre.
-
-
-
closure.
containers full of cut grass inside storage areas.
E) ADDITIONAL WARNINGS
-
-
-
-
thorised service centre.
-
-
-
-
-
rolled up during use.
or grounded.
F) TRANSPORTATION AND HANDLING
-
-
age or injuries.
-
bles or chains.
G) ENVIRONMENTAL PROTECTION
-
-
ing area.
-
-
-
-
GETTING TO KNOW THE MACHINE
MACHINE DESCRIPTION
AND SCOPE OF APPLICATION
-
Intended use
-
-
trian operator.
-
User types
Improper use
-
age things.
-
-
-
grass.
IDENTIFICATION LABEL
AND MACHINE COMPONENTS
(see figures on page ii)
1.
2.
3.
4.
5.
6.
7. Article Code
8.
9.
10.
10a. Electrical protection rating
11. Chassis
12. Motor
13.
14. Rear discharge guard
15. Grass catcher
16. Handle
17. Control lever
18.
4
-
Directive 2012/19/EU on electrical and electronic
-
-
service.
DESCRIPTION OF SYMBOLS
ON CONTROLS (where applicable)
20. -
21. Stop
22. Run
SAFETY REQUIREMENTS
-
-
41.
42.
44.
45. -
OPERATING INSTRUCTIONS
NOTE – The number which precedes each paragraph
links the references in the text to the respective illus-
trations (listed on page iii and following pages).
1. COMPLETING ASSEMBLY
NOTE The machine can be supplied with some parts
already assembled.
WARNING! Unpacking and completing the assem-
bly should be done on a flat and stable surface, with
enough space for moving the machine and its packag-
ing, always making use of suitable equipment.
Disposal of the packaging should be done in accord-
ance with the local regulations in force.
1.1a Handle assembly (Type“I”)
-
(6) and bolt (7).
-
the handle to the operator’s stature.
Fit the cable fastener (11) in the indicated position and then
attach the cable (12).
1.1b Handle assembly (Type“II”)
(6) and bolt (7).
-
the handle to the operator’s stature.
Fit the cable fastener (11) in the indicated position and then
attach the cable (12).
1.2 Assembling the grass catcher
(Type “l” and Type“lI”)
(2), snapping it into the appropriate seats.
catcher (4), snapping it into the appropriate seats.
into place.
2. CONTROLS DESCRIPTION
NOTE The meanings of the symbols on controls are
explained in the previous pages.
2.1 Dual-action switch
accidental start-ups.
WARNING! Ignition of the motor simultaneously
engages the cutting means.
-
leased.
2.2 Cutting height adjustment
-
ed slots inside the chassis.
DO THIS WHEN THE CUTTING MEANS IS STATIONARY.
5
3. GRASS CUTTING
NOTE This machine can be used to mow lawns in a num-
ber of different ways; before starting work, prepare the ma-
chine based on how the lawn is to be mowed. DO THIS
WHEN THE MOTOR IS SWITCHED OFF.
3.1 Preparation for grass cutting
and collection in the grass catcher:
Lift the rear discharge guard (1) and fasten the grass catch-
3.2 Ignition
3.3 Grass cutting
-
cut.
When the grass catcher is too full, grass collection is no
– lift the rear discharge guard, grasp the handle and re-
Lawn care recommendations
-
3.4 End of operations
-
IMPORTANT If the motor stops while mowing due to over-
heating, you must wait about 5 minutes before restarting it.
4. ROUTINE MAINTENANCE
IMPORTANT Routine and accurate maintenance is es-
sential in maintaining original machine safety and perfor-
mance levels.
-
-
-
-
4.1 Cutting means maintenance
4.2 Cleaning the machine
-
Do not use aggressive liquids to clean the chassis.
5. DIAGNOSTICS
What to do if ....
Corrective Action
1. The electric lawnmower doesn’t work
connection.
2. The electric lawnmower trips the power supply.
Other electrical appliances
are being used Do not connect other
3. The cut grass is not collected in the grass catcher
sharpened or replace it
grass catcher
6
The inside of the chassis
Clean the inside of the
chassis to ease the grass
grass catcher
4. Mowing is difficult
good condition
sharpened or replace it
5. The machine starts to vibrate abnormally
loose parts
6. The motor shuts down whilst working
tripped due to overheating
of debris.
-
DoC_bas e r.15 - WBH_El-Bat_0
DICHIARAZIONE CE DI CONFORMITÁ
(Istruzioni Originali)
(Direttiva Macchine 2006/42/CE, Allegato II, parte A)
1. La Società: ST. S.p.A. – Via del Lavoro, 6 – 31033 Castelfranco Veneto (TV) – Italy
2. Dichiara sotto la propria responsabilità, che la macchina: Tosaerba con conducente a piedi/ taglio erba
a) Tipo / Modello Base E 300
b) Mese/Anno di costruzione
c) Matricola
d) Motore
elettrico
3. É conforme alle specifiche delle direttive:
• MD: 2006/42/EC
e) Ente Certificatore /
f) Esame CE del tipo: /
• OND: 2000/14/EC, ANNEX VI - 2005/88/EC
e) Ente Certificatore N° 0359 - Interterk Testing & Certification Ltd
Intertek House, Cleeve Road
Leatherhead, Surrey KT22 7SA, United Kingdom
• EMCD: 2014/30/EU
• RoHS II: 2011/65/EU - 2015/863/EU
4. Riferimento alle Norme armonizzate:
EN 60335-1:2012+A11:2014+A13:2017
EN 60335-2-77:2010
EN 62233:2008
EN IEC 63000:2018
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
g) Livello di potenza sonora misurato
92
dB(A)
h) Livello di potenza sonora garantito
93
dB(A)
i) Ampiezza di taglio
30
cm
n) Persona autorizzata a costituire il Fascicolo Tecnico: ST. S.p.A.
Via del Lavoro, 6
31033 Castelfranco Veneto (TV) - Italia
o) Castelfranco V.to, 15.09.2020 CEO Stiga Group
Sean Robinson
171513879_11
FR (Traduction de la notice originale)
Déclaration CE de Conformité
(Directive Machines 2006/42/CE, Annexe II, partie
A)
1. La Société
2. Déclare sous sa propre responsabilité que la
machine : Tondeuse à gazon à conducteur à
pied / coupe du gazon
a) Type / Modèle de Base
b) Mois / Année de construction
c) Série
d) Moteur: électrique
3. Est conforme aux prescriptions des
directives :
e) Organisme de certification
f) Examen CE du Type
4. Renvoi aux Normes harmonisées
g) Niveau de puissance sonore mesuré
h) Niveau de puissance sonore garanti
i) Largeur de coupe
n) Personne habilitée à établir le Dossier
Technique :
o) Lieu et Date
EN (Translation of the original instruction)
EC Declaration of Conformity
(Machine Directive 2006/42/EC, Annex II, part A)
1. The Company
2. Herby declares under its own responsibility
that the machine: Pedestrian-controlled lawn
mower / grass cutting
a) Type / Base Model
b) Month / Year of manufacture
c) Serial number
d) Motor: electric
3. Conforms to directive specifications:
e) Certifying body
f) EC examination of Type
4. Reference to harmonised Standards
g) Sound power level measured
h) Sound power level guaranteed
i) Range of cut
n) Person authorised to create the Technical
Folder:
o) Place and Date
DE (Übersetzung der Originalbetriebsanleitung)
EG-Konformitätserklärung
(Maschinenrichtlinie 2006/42/EG, Anhang II, Teil
A)
1. Die Gesellschaft
2. Erklärt auf eigene Verantwortung, dass die
Maschine: Handgeführter Rasenmäher /
rasenschnitt
a) Typ / Basismodell
b) Monat / Baujahr
c) Seriennummer
d) Motor: elektrisch
3. Den Anforderungen der folgenden Richtlinien
entspricht:
e) Zertifizierungsstelle
f) EG-Baumusterprüfung
4. Bezugnahme auf die harmonisierten Normen
g) Gemessener Schallleistungspegel
h) Garantierter Schallleistungspegel
i) Schnittbreite
n) Zur Verfassung der technischen Unterlagen
befugte Person:
o) Ort und Datum
NL (
Vertaling van de oorspronkelijke gebruiksaanwijzing)
EG-verklaring van overeenstemming
(Richtlijn Machines 2006/42/CE, Bijlage II, deel A)
1. Het bedrijf
2. Verklaart onder zijn eigen
verantwoordelijkheid dat de machine: Lopend
bediende grasmaaier / grasmaaier
a) Type / Basismodel
b) Maand / Bouwjaar
c) Serienummer
d) Motor: elektrisch
3. Voldoet aan de specificaties van de
richtlijnen:
e) Certificatie-instituut
f) EG-onderzoek van het Type
4. Verwijzing naar de Geharmoniseerde normen
g) Gemeten niveau van geluidsvermogen
h) Gegarandeerd niveau van geluidsvermogen
i) Snijbreedte
n) Bevoegd persoon voor het opstellen van het
Technisch Dossier
o) Plaats en Datum
ES (
Traducción del Manual Original)
Declaración de Conformidad CE
(Directiva Máquinas 2006/42/CE, Anexo II, parte
A)
1. La Empresa
2. Declara bajo su propia responsabilidad que la
máquina: Cortadora de pasto con operador de
pie / corte hierba
a) Tipo / Modelo Base
b) Mes / Año de fabricación
c) Matrícula
d) Motor: eléctrico
3. Cumple con las especificaciones de las
directivas:
e) Ente certificador
f) Examen CE del Tipo
4. Referencia a las Normas armonizadas
g) Nivel de potencia sonora medido
h) Nivel de potencia sonora garantizado
i) Amplitud de corte
n) Persona autorizada a realizar el Manual
Técnico:
o) Lugar y Fecha
PT (
Tradução do manual original)
Declaração CE de Conformidade
(Diretiva de Máquinas 2006/42/CE, Anexo II,
parte A)
1. A Empresa
2. Declara sob a própria responsabilidade que a
máquina: Corta-relvas para operador apeado /
corte da relva
a) Tipo / Modelo Base
b) Mês / Ano de fabrico
c) Matrícula
d) Moto: eléctrico
3. É conforme às especificações das diretivas:
e) Órgão certificador
f) Exame CE do Tipo
4. Referência às Normas harmonizadas
g) Nível medido de potência sonora
h) Nível garantido de potência sonora
i) Amplitude de corte
n) Pessoa autorizada a elaborar o Caderno
Técnico
o) Local e Data
EL (
Μετάφραση του πρωτοτύπου των οδηγιών
χρήσης)
EK-Δήλωση συμμόρφωσης
(Οδηγία Μηχανών 2006/42/CE, Παράρτημα II,
μέρος A)
1. Η Εταιρία
2. Δηλώνει υπεύθυνα ότι η μηχανή:
Χλοοκοπτική μηχανή με όρθιο χειριστή / κοπή
της χλόης
a) Τύπος / Βασικό Μοντέλο
b) Μήνας / Έτος κατασκευής
c) Αριθμός μητρώου
d) Κινητήρας: ηλεκτρικό
3. Συμμορφώνεται με τις προδιαγραφές της
οδηγίας:
e) Οργανισμός πιστοποίησης
f) Εξέταση CE του Τύπου
4. Αναφορά στους Κανονισμούς εναρμόνισης
g) Στάθμη μέτρησης ακουστικής ισχύος
h) Στάθμη εγγυημένης ακουστικής ισχύος
i) Εύρος κοπής
n) Εξουσιοδοτημένο άτομο για την κατάρτιση
του Τεχνικού Φυλλαδίου:
o) Τόπος και Χρόνος
TR (
Orijinal Talimatların Tercümesi)
AT Uygunluk Beyanı
(2006/42/CE Makine Direktifi, Ek II, bölüm A)
1. Şirket
2. Şahsi sorumluluğu altında aşağıdaki
makinenin: Ayak kumandalı çim biçme makinesi
/ çim kesimi
a) Tip / Standart model
b) Üretimin Ay / yıl
c) Sicil numarası
d) Motor: elektrikli
3. Aşağıdaki direktiflerin özelliklerine uygun
olduğunu beyan etmektedir:
e) Sertifikalandıran kurum
f) ... Tipi CE incelemesi
4. Harmonize standartlara atıf
g) Ölçülen ses güç seviyesi
h) Garanti edilen ses güç seviyesi
i) Kesim genişliği
n) Teknik Dosyayı oluşturmaya yetkili kişi:
o) Yer ve Tarih
MK (
Превод на оригиналните упатства)
Декларација за усогласеност со ЕУ
(Директива за машини 2006/42/CE, Анекс II,
дел A)
1. Компанијата
2. изјавува со целосна лична одговорност
дека следната машина: Тревокосачка со
оператор на нозе / косење трева
а) Тип / основен модел
б) Месец / Година на производство
в) етикета
г) мотор: на струја
3. Усогласено со спецификациите според
директивите:
д) тело за сертификација
ѓ) тест СЕ за типот
4. Референци за усогласени нормативи
е) Акустички притисок
ж) измерено ниво на звучна моќност
з) Ниво на гарантирана звучна моќност
н) овластено лице за составување на
Техничката брошура
o) место и датум
EXAMPLE
DoC_bas e r.15 - WBH_El-Bat_0
DICHIARAZIONE CE DI CONFORMITÁ
(Istruzioni Originali)
(Direttiva Macchine 2006/42/CE, Allegato II, parte A)
1. La Società: ST. S.p.A. – Via del Lavoro, 6 – 31033 Castelfranco Veneto (TV) – Italy
2. Dichiara sotto la propria responsabilità, che la macchina: Tosaerba con conducente a piedi/ taglio erba
a) Tipo / Modello Base E 320
b) Mese/Anno di costruzione
c) Matricola
d) Motore
elettrico
3. É conforme alle specifiche delle direttive:
• MD: 2006/42/EC
e) Ente Certificatore /
f) Esame CE del tipo: /
• OND: 2000/14/EC, ANNEX VI - 2005/88/EC
e) Ente Certificatore: N°0036 – TÜV SUD Industrie Service GmbH
Westendstraße 199, 80686 München – Germany
• EMCD: 2014/30/EU
• RoHS II: 2011/65/EU - 2015/863/EU
4. Riferimento alle Norme armonizzate:
EN 60335-1:2012+A11:2014+A13:2017
EN 60335-2-77:2010
EN 62233:2008
EN IEC 63000:2018
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
g) Livello di potenza sonora misurato
91
dB(A)
h) Livello di potenza sonora garantito
93
dB(A)
i) Ampiezza di taglio
32
cm
n) Persona autorizzata a costituire il Fascicolo Tecnico: ST. S.p.A.
Via del Lavoro, 6
31033 Castelfranco Veneto (TV) - Italia
o) Castelfranco V.to, 15.09.2020 CEO Stiga Group
Sean Robinson
171513880_11
FR (Traduction de la notice originale)
Déclaration CE de Conformité
(Directive Machines 2006/42/CE, Annexe II, partie
A)
1. La Société
2. Déclare sous sa propre responsabilité que la
machine : Tondeuse à gazon à conducteur à
pied / coupe du gazon
a) Type / Modèle de Base
b) Mois / Année de construction
c) Série
d) Moteur: électrique
3. Est conforme aux prescriptions des
directives :
e) Organisme de certification
f) Examen CE du Type
4. Renvoi aux Normes harmonisées
g) Niveau de puissance sonore mesuré
h) Niveau de puissance sonore garanti
i) Largeur de coupe
n) Personne habilitée à établir le Dossier
Technique :
o) Lieu et Date
EN (Translation of the original instruction)
EC Declaration of Conformity
(Machine Directive 2006/42/EC, Annex II, part A)
1. The Company
2. Herby declares under its own responsibility
that the machine: Pedestrian-controlled lawn
mower / grass cutting
a) Type / Base Model
b) Month / Year of manufacture
c) Serial number
d) Motor: electric
3. Conforms to directive specifications:
e) Certifying body
f) EC examination of Type
4. Reference to harmonised Standards
g) Sound power level measured
h) Sound power level guaranteed
i) Range of cut
n) Person authorised to create the Technical
Folder:
o) Place and Date
DE (Übersetzung der Originalbetriebsanleitung)
EG-Konformitätserklärung
(Maschinenrichtlinie 2006/42/EG, Anhang II, Teil
A)
1. Die Gesellschaft
2. Erklärt auf eigene Verantwortung, dass die
Maschine: Handgeführter Rasenmäher /
rasenschnitt
a) Typ / Basismodell
b) Monat / Baujahr
c) Seriennummer
d) Motor: elektrisch
3. Den Anforderungen der folgenden Richtlinien
entspricht:
e) Zertifizierungsstelle
f) EG-Baumusterprüfung
4. Bezugnahme auf die harmonisierten Normen
g) Gemessener Schallleistungspegel
h) Garantierter Schallleistungspegel
i) Schnittbreite
n) Zur Verfassung der technischen Unterlagen
befugte Person:
o) Ort und Datum
NL (
Vertaling van de oorspronkelijke gebruiksaanwijzing)
EG-verklaring van overeenstemming
(Richtlijn Machines 2006/42/CE, Bijlage II, deel A)
1. Het bedrijf
2. Verklaart onder zijn eigen
verantwoordelijkheid dat de machine: Lopend
bediende grasmaaier / grasmaaier
a) Type / Basismodel
b) Maand / Bouwjaar
c) Serienummer
d) Motor: elektrisch
3. Voldoet aan de specificaties van de
richtlijnen:
e) Certificatie-instituut
f) EG-onderzoek van het Type
4. Verwijzing naar de Geharmoniseerde normen
g) Gemeten niveau van geluidsvermogen
h) Gegarandeerd niveau van geluidsvermogen
i) Snijbreedte
n) Bevoegd persoon voor het opstellen van het
Technisch Dossier
o) Plaats en Datum
ES (
Traducción del Manual Original)
Declaración de Conformidad CE
(Directiva Máquinas 2006/42/CE, Anexo II, parte
A)
1. La Empresa
2. Declara bajo su propia responsabilidad que la
máquina: Cortadora de pasto con operador de
pie / corte hierba
a) Tipo / Modelo Base
b) Mes / Año de fabricación
c) Matrícula
d) Motor: eléctrico
3. Cumple con las especificaciones de las
directivas:
e) Ente certificador
f) Examen CE del Tipo
4. Referencia a las Normas armonizadas
g) Nivel de potencia sonora medido
h) Nivel de potencia sonora garantizado
i) Amplitud de corte
n) Persona autorizada a realizar el Manual
Técnico:
o) Lugar y Fecha
PT (
Tradução do manual original)
Declaração CE de Conformidade
(Diretiva de Máquinas 2006/42/CE, Anexo II,
parte A)
1. A Empresa
2. Declara sob a própria responsabilidade que a
máquina: Corta-relvas para operador apeado /
corte da relva
a) Tipo / Modelo Base
b) Mês / Ano de fabrico
c) Matrícula
d) Moto: eléctrico
3. É conforme às especificações das diretivas:
e) Órgão certificador
f) Exame CE do Tipo
4. Referência às Normas harmonizadas
g) Nível medido de potência sonora
h) Nível garantido de potência sonora
i) Amplitude de corte
n) Pessoa autorizada a elaborar o Caderno
Técnico
o) Local e Data
EL (
Μετάφραση του πρωτοτύπου των οδηγιών
χρήσης)
EK-Δήλωση συμμόρφωσης
(Οδηγία Μηχανών 2006/42/CE, Παράρτημα II,
μέρος A)
1. Η Εταιρία
2. Δηλώνει υπεύθυνα ότι η μηχανή:
Χλοοκοπτική μηχανή με όρθιο χειριστή / κοπή
της χλόης
a) Τύπος / Βασικό Μοντέλο
b) Μήνας / Έτος κατασκευής
c) Αριθμός μητρώου
d) Κινητήρας: ηλεκτρικό
3. Συμμορφώνεται με τις προδιαγραφές της
οδηγίας:
e) Οργανισμός πιστοποίησης
f) Εξέταση CE του Τύπου
4. Αναφορά στους Κανονισμούς εναρμόνισης
g) Στάθμη μέτρησης ακουστικής ισχύος
h) Στάθμη εγγυημένης ακουστικής ισχύος
i) Εύρος κοπής
n) Εξουσιοδοτημένο άτομο για την κατάρτιση
του Τεχνικού Φυλλαδίου:
o) Τόπος και Χρόνος
TR (
Orijinal Talimatların Tercümesi)
AT Uygunluk Beyanı
(2006/42/CE Makine Direktifi, Ek II, bölüm A)
1. Şirket
2. Şahsi sorumluluğu altında aşağıdaki
makinenin: Ayak kumandalı çim biçme makinesi
/ çim kesimi
a) Tip / Standart model
b) Üretimin Ay / yıl
c) Sicil numarası
d) Motor: elektrikli
3. Aşağıdaki direktiflerin özelliklerine uygun
olduğunu beyan etmektedir:
e) Sertifikalandıran kurum
f) ... Tipi CE incelemesi
4. Harmonize standartlara atıf
g) Ölçülen ses güç seviyesi
h) Garanti edilen ses güç seviyesi
i) Kesim genişliği
n) Teknik Dosyayı oluşturmaya yetkili kişi:
o) Yer ve Tarih
MK (
Превод на оригиналните упатства)
Декларација за усогласеност со ЕУ
(Директива за машини 2006/42/CE, Анекс II,
дел A)
1. Компанијата
2. изјавува со целосна лична одговорност
дека следната машина: Тревокосачка со
оператор на нозе / косење трева
а) Тип / основен модел
б) Месец / Година на производство
в) етикета
г) мотор: на струја
3. Усогласено со спецификациите според
директивите:
д) тело за сертификација
ѓ) тест СЕ за типот
4. Референци за усогласени нормативи
е) Акустички притисок
ж) измерено ниво на звучна моќност
з) Ниво на гарантирана звучна моќност
н) овластено лице за составување на
Техничката брошура
o) место и датум
EXAMPLE
This manual suits for next models
2
Table of contents
Other Alpina Lawn Mower manuals
