Altec Lansing IN MOTION IMT520 User manual

Altec Lansing inMotion Kick Portable Stereo for iPhone and iPod
Enceinte portable pour iPhone et iPod Altec Lansing inMotion Kick
Estéreo portátil Altec Lansing inMotion Kick para iPhone y iPod
Sistema estéreo portátil inMotion Kick da Altec Lansing para iPhone e iPod
iMT520
User Guide
Guide d’utilisation
Guía del usuario
Guia do Usuário

ii
Welcome
Thank you for purchasing the Altec Lansing inMotion Kick speaker
system.Designed specifically to work with your iPhone and iPod, this
system provides high-quality audio performance that brings out the best
inyour music.
Please carefully read this User Guide for instructions on setting up and
using your inMotion Kick speaker system.
Prior to installing or operating the Altec Lansing inMotion Kick speaker
system, refer to the important product safety information.
Getting Assistance
The answers to most setup and performance questions can be found in the
Troubleshooting section of this guide. You can also consult the frequently
asked questions (FAQ) in the customer support section of our Web site at
www.alteclansing.com.
If you live in North America and still can’t find the information you need,
please call our customer service team for assistance before returning this
product to your retailer under their return policy.
Tel: [phone] (Toll Free in US and Canada)
Email: [email protected]
If you live outside of North America, please visit our Web site at
www.alteclansing.com and select your region to locate your
country’sdistributor.
For the most up-to-date information, be sure to check our Web site at
www.alteclansing.com.
International Distribution
International customers: For information regarding the distributionof Altec
Lansing products in your country, please visitwww.alteclansing.com and
click on your region.
Registering Your Product
Visit www.alteclansing.com to register your product online,
so we can provide you with the best possible service and technical support.
FCC Compliance
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference
that may cause undesired operation.

1
EN
CAUTION
To prevent electric shock do not use this (polarized) plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade
exposure.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain
ormoisture.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. This apparatus shall not be exposed to
dripping or splashing, and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
fromtip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
oftime.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
hasbeen dropped.
15. Do not install in an area which impedes the access to the power plug. Disconnecting
the power plug is the only way to completely remove power to the product and must
be readily accessible at all times.
16. Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
NOTE The lithium-ion battery must be properly recycled or disposed of. Please contact
your local recycling center for proper battery handling and disposal instructions.
Please read FCC information and important safety logos at the bottom of the unit.
The lightning flash with arrowhead, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Caution: To prevent the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to
qualified service personnel.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanyingthe appliance.
Safety Information

2
Contents
Welcome............................................................................................................................................................................................................................... ii
Safety Information ................................................................................................................................................................................................................ 1
Package Contents................................................................................................................................................................................................................ 3
Getting Started.....................................................................................................................................................................................................................4
Placing and Removing Adapters for the iPhone and iPod...................................................................................................................................................6
Speaker Features and Indicators .........................................................................................................................................................................................7
Speaker Controls.................................................................................................................................................................................................................. 8
Full-featured Remote Details................................................................................................................................................................................................ 9
Listening to Your iPhone or iPod........................................................................................................................................................................................11
Charging your iPhone or iPod ............................................................................................................................................................................................12
Listening to a Non-docking iPod or Other Portable Audio Device..................................................................................................................................... 13
Maintaining Your Speaker System .....................................................................................................................................................................................13
Troubleshooting..................................................................................................................................................................................................................14
Warranty .............................................................................................................................................................................................................................17

3
EN
Package Contents
AC adapter
Full-featured remote
Altec Lansing inMotion Kick speaker system
Miscellaneous adapters
for iPhone and iPod

4
Getting Started
How to Position the Adjustable Handle
Your Altec Lansing inMotion Kick speaker system is equipped with a unique
adjustable handle that doubles as a kick-stand. It provides both an easy
way to carry the speaker system as well as a stand to support the speaker
system when placed on a flat surface.
Prop the speaker system
on its adjustable handle
The adjustable handle doubles as a stand.
Rotate the handle to its rearmost position.
Simply grasp and swing the handle backward
from either the pack position or carry position.
Lift the speaker system
handle for carry
Rotate the handle to its top position. Simply
grasp and swing the handle backward from the
pack position or forward from the kick-stand
position.
Pack up the
speaker system
Rotate the handle to its down point, tucking it
snugly under the base of the speaker system.
Simply grasp and swing the handle down from
either the kick-stand position or carry position.
When the handle is in the pack position, the
speaker system will automatically turn off.
WARNING In order to prevent accidentally dropping your iPhone or iPod,
be sure to remove it from the docking station before picking up the speaker
system by the handle.
How to Install the AC Adapter
1 Connect the AC adapter cable plug
into the speaker system’s jack.
The jack is located on the back of
thesystem.
2 Plug the AC adapter into the
walloutlet.
WARNING Use of another AC adapter may
damage the product. Use only the supplied
AC adapter.
How to Charge the Lithium-Ion Battery
Your Altec Lansing inMotion Kick speaker
system includes a rechargeable lithium-ion
battery. This battery should be fully charged before initial use of the speaker
system. A full charge will provide up to 6.5hours of continuous playing time.
1 Connect the speaker system to a wall outlet.
See the How to Install the AC Adapter section. When the speaker
system is on, the “Battery” LED will flash slowly to show the battery
is charging. Once the battery is fully charged, the “Battery” LED will
remain solid.
2 Allow the battery to charge.
Charging time: Approximately 4 hours for a full charge. When the
battery is low, the “Battery” LED will flash rapidly.
WARNING During the recharging process, it is typical for the battery
to become warm. To be safe, keep flammable materials away from the
speaker system.

5
EN
Getting Started
How to Disconnect the Rechargeable Battery
1 Unplug the inMotion Kick from the wall outlet.
2 Remove the rechargeable battery compartment cover at the
back of the system by removing the screw.
3 Unplug the battery and remove it.
WARNING There is a danger of explosion if the battery is incorrectly
replaced. Replace it only with the same or equivalent type. Do not expose it
to excessive heat such as sunshine, fire, etc.
BATTERY DISPOSAL The battery used in this product must be properly
recycled or disposed of. Please contact your local recycling center for
proper battery handling and disposal instructions.
Rated Voltage: 3.7V Capacity: 1800mAh Type: McR18650
How to Install the Full-featured Remote Battery
The full-featured remote battery (included) is not installed at the factory. To
install the battery, follow the steps below:
1 Pull out the battery holder.
The battery door is located on the
lower end of the remote. Simply pull
the tab to open the battery holder.
2 Position the included lithium coin
battery (CR2025) battery so it sits in
the battery holder correctly.
Make sure the polarity (the + and – sides of the battery) is correct.
3 Replace the battery door.
NOTE Please discard used batteries properly.

6
Placing and Removing Adapters for the iPhone and iPod
Your Altec Lansing inMotion Kick speaker system includes removable
adapters for today’s popular iPhone and iPod models. These adapters
ensure that your iPhone and iPod properly fit in the speaker system’s dock.
As new iPhone and iPod models are introduced, new adapters will be made
available to customers. You may also use the adapter supplied with your
iPhone or iPod, or available for purchase at www.apple.com.
How to Place an Adapter
1 Select the correct adapter for your
iPhone or iPod.
Using the correct adapter ensures a
proper fit for your iPhone or iPod.
2 Gently press the iPhone or iPod
adapter into the dock.
Now you can carefully place your
iPhone or iPod into the dock.
NOTE Your iPhone or iPod cannot be in
acase.
How to Remove an Adapter
1 Remove your iPhone or iPod.
2 Grip the adapter and pull gently upward.

7
EN
Speaker Features and Indicators
Universal docking station for iPhone or iPod
Battery LED
iPod LED
AUX LED
Source button
Power LED
Track forward button
Volume increase button
Volume decrease button
AC adapter jack
Adjustable handle
AUX jack
Power on/off button
Track back button

8
Speaker Controls
Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started
section for more information. Press the button.
Turn off your speaker system Press the button. Whenever you are finished using your speaker system, please remember to turn it
and your iPhone, iPod or other MP3 player off to conserve electricity.
Change audio source Press the “SOURCE” button to select the audio source: iPod or AUX.
Turn up the volume Press the “+” button.
Turn down the volume Press the “–” button.
Skip to the beginning of the current song
on your iPhone or iPod In “iPod” mode, press the button.
Rewind the currently playing track on
your iPhone or iPod In “iPod” mode, press and hold the button.
Skip to the beginning of the next song
on youriPhone or iPod In “iPod” mode, press the button.
Fast-forward the currently playing track
on youriPhone or iPod In “iPod” mode, press and hold the button.
Listen to a non-docking iPod or MP3 player See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information
on using devices attached to your speaker system’s AUX jack.