Altec Lansing IMW575 User manual

Quick Start Guide for Model:IMW575
3 Charging: When charging, an orange LED light will illuminate.
The orange light will turn off when your unit is fully charged.
.
2.Connect the included USB Cable to the the included AC adapter to
charge your speaker’s internal battery. A full charge takes
approximately 4 hours.
1.Make sure the following items are
included in your package.
4.For a look at the various buttons on your speaker,view the graphic below.
Once powered on, you will hear your
speaker audibly say “Powering ON.”
2 seconds
6.While audio is playing, press and hold the “-”
5.To power on your speaker, press and hold the “ ” ON/OFF button for
about 2 seconds.
AC Adapter
3.5 MM
Auxiliary Cable
or
2 seconds
USB Cable
Power on your speaker. Go to the
Bluetooth Manager of your Bluetooth
device. Search Bluetooth devices and
select “iMW575” to start
connecting.
Technical Support
For technical support issues please visit our website at www.alteclansing.com.
You can find manuals, software and FAQ’s at the website. Can’t find what you
are looking for? Call 1-855-292-4087 to access our technical support
information on the phone.
.
Pair the Speaker Using NFC
With Near Field Communication(NFC), you can
easily pair and connect your speaker to your
compatible device. Just hold your NFC enabled
device directly against the wireless check in spot on
your speaker.
Once paired, you will hear your speaker audibly say: “You are now paired, enjoy.”
7.You can also use the included 3.5mm Auxiliary Cable
to connect audio devices through the AUX In port on your
speaker.
“+ ”
and
buttons simultaneously to disconnect the Bluetooth pairing between
your speaker and your audio source.