Altec Lansing Shockwave User manual

IMT7000

IMT7000
Charging Cable
(USB-C to USB-A)
Quick Start Guide
IMT7000
IMT7000

Play/Pause (BT mode only)
AUX mode: Short press MUTE
Press and hold button for 3 seconds to
power on or power off speaker
Brief introduction to buttons on top panel
Volume Control：
Decrease volume
Previous song
Increase volume
Volume Control:
Next song
Power Button：
Bass Button:
Briefly press to switch bass mode,
total 3 modes.
Light Button:
Briefly press to turn on/off the light
mode and switch the light modes,
total 9 modes
BT & Party-sync Button:
Briefly press to enter Bluetooth pairing mode,
Press and hold for Bluetooth disconnect,
Double-click for party-sync connect or disconnect
AUX mode
Reset to default settings:
Press and hold the BASS button for 10S to reset all settings back to factory default.
Indicators:
: Bluetooth pairing (Flashing blue quickly),
Bluetooth connected (Solid blue),
Sync up with other speakers (Flashing blue slowly)
: AUX mode （Solid orange）
: Bass 1, Bass 2, Bass 3 (Solid Blue)
: Power on (Solid blue)

AL Shockwave
Bluetooth Connection
Party-sync with AL SHOCKWAVE Family
Go to the Bluetooth settings menu on your phone. Make sure
that Bluetooth is turned on. Connect to the device listed
as “AL Shockwave ”
Speaker will enter into BT mode when powered on;
Briey press the BT button to enter into BT mode;
Item Number Item name Pairing Name
IMT7000
IMT7100
IMT7200
IMT7300
Shockwave Wireless Party Speaker AL Shockwave
Shockwave 200 Wireless party speaker
Shockwave 300 Wireless Party Speaker
Shockwave 400 Wireless Party Speaker
AL Shockwave 200
AL Shockwave 300
AL Shockwave 400
ALShockwave
If you want to change to a dierent BT device when already paired press and
hold the BT button, the speaker will disconnect from its paired device. A dierent
device can now be paired.
A double press of the BT button is used to enter/exit party-sync mode on
extra speakers if you have them as below.

LIGHTING CONTROL
The Altec Lansing SHOCKWAVE family has four members that support party-sync.
You can mix and match between any of these four models, setting up one
speaker as the primary unit connected to up to 100 other speakers all playing
in sync.
1. Connect one speaker to your Bluetooth device in the normal way via Bluetooth.
2. Double-press the BT button on the next speaker to enter Party-sync mode,
its BT LED will ashes slowly and it will nd and connect to the rst (primary)
speaker.
3. Repeat No 2 if you have more speakers you want to connect.
4. To exit party-sync double press the BT button on the speakers you wish
to disconnect and return to normal operation.
Notes:
Playback volume is adjusted via the rst (primary) speaker.
The BT playback controls only operate on the rst (primary) speaker.
Turning o the rst (primary) speaker turns o all speakers.
All secondary speakers can be turned on/o individually and their light modes
changed via their individual controls.
Briey press the LIGHTS button to switch lighting mode.
(Note: Some modes which use ‘sound-to-light’ need music playing to be visible)
Mode 1: Rotating ring in three colors
Mode 2: Flashing to music
Mode 3: ‘Spectrum’
Mode 4: ‘Stacking/re-stacking’ lights both sides
Mode 5: Rotating lights in multi-colors
Mode 6: Breathing on/o
Mode 7: Flashing to music, solid lighting when no audio
Mode 8: ‘Bar-graph’ in multi-colors
Mode 9: Rotating ‘stacking/re-stacking’ lights
Each press moves to the next mode and back round to o.

Length of Charging cable (USB-A to USB-C): 90cm
Descriptions about the various ports on the speaker
INPUT/OUTPUT PORTS
AUX:
For line level or headphone output
from audio sources
USB OUT:
For charging your mobile devices
DC IN:
USB-C port for charging your speaker
from suitable USB socket/PSU.
RESET:
Button is recessed inside. For use only in the
unlikely case of a lock up. Use paperclip or pin
to perform restart of the speaker.
Charging-in indicator:
Solid red when charging, will
be off when fully charged
USB-A output: 5V 1A
Power Audio: 60W (Peak) Total
Drivers Units: 4” Bass, 2” Tweeter + Rear Auxiliary Bass Radiator.
S/N: ≥70dB
Distortion: ≤0.5%(1K,1W)
Dimensions: L205*H315*D172 mm
USB-C charging Input: 5V 2.5A