Altec Lansing SoundRover 50 User manual

QUICK START GUIDEITEM: IMT8000
PEAK
6

IN THE BOX
1.
IMT8000 Party Speaker
USB-C Charging Cable

INPUT/OUTPUT PORTS
2.
1. DC5V Charging Port
2. Auxiliary Input
3. Microphone Input
1
2
3

SPEAKER CONTROLS
3.
1. Power
2. Volume
3. Light Modes
4. Previous Track/MIC Vol. Decrease (press and hold)
5. Play/Pause
6. Next Track/MIC Vol. Increase (press and hold)
7. Bass Control
8. Treble Control
9. LED Indicator (Charging = Red)
12
3
4
5
6
7
8
9

AL SoundRover 50
Available device
Bluetooth
AUDIO MODES
4.
Bluetooth Pairing:
Press the Power button so that it is in the On position
to power on your speaker.
After turning the speaker On, go to the Bluetooth
page in the Settings app on your phone. Make sure
Bluetooth is On before connecting to the available
device ‘AL SoundRover 50’.
The speaker’s LED Indicator will quickly flash blue
when pairing, and will turn solid blue when the
speaker is paired to a device.
AUX Input:
Insert one end of a 3.5mm audio cable (not included)
into the speaker’s AUX In Jack. Insert the other end
into a device with an AUX jack.
The LED Indicator will illuminate solid blue when an
audio cable is connected to the speaker.

LIGHT MODES
5.
Press the Light Modes button to turn the lights On.
Press the button repeatedly to toggle through the six
Press and hold the Light Modes button to turn the

MICROPHONE
6.
Connect a microphone (not included) into the
Microphone jack to sing along to music.
Press and hold the MIC Vol. Decrease and MIC Vol.
Increase buttons to adjust the microphone’s volume.

SAFETY PRECAUTIONS
7.

SPECIFICATIONS
8.
Bluetooth Specification: V5.0
Bluetooth Range: up to 33 Feet
Battery Type: Rechargeable Lithium Ion Battery
Output: 50W Peak
Charging Time: 5-6 Hours
Play Time: Up to 6 hours**
** Playtime is for reference only and will be lower at
very high volume or with lights on. 6 Hours is
achievable at approx 40% volume level.