Alterseat LIV-10 User manual

INSTRUCTION MANUAL
2022/2023
ALTERSEAT (M) SDN BHD
Add: B-1, 20, Jalan Persiaran Jalil 1, Bukit Jalil 57000 Kuala Lumpur.
Tel: [phone]
Web: https://alterseat.com/

TABLE OF CONTENTS
INTRODUCTION………………………………………………….. 1
PARTS OF THE CHAIR…………………………………………… 2
INSTALLATION OF THE CHAIR……………………………… 3
ADJUSTING YOUR SEAT………………………………………… 12

Welcome to the Alterseat Team and thank you altering your
ergonomic experience with us. This product is
manufactured and designed solely by Alterseat (M)Sdn.Bhd.
We specialize in producing and manufacturing office chairs
for over 20 years including other furniture.
Before proceeding into this manual, ensure that after
unpacking and before any assembly, all items and parts of
installation are clear of any damages. If there are any
damages found, immediately contact our customer service
number 03-5033 2690 for assistance.
This product is intended for indoor use. Kindly take time to
read and follow the instructions provided in the following
pages. Install as described and guided in this installation
manual. We accept no liability for damages caused for
any improper use.
From,
Team Alterseat
1
INTRODUCTION

PU Castors 5PCS
2
PARTS OF THE CHAIR I
Aluminium Heel 5PCS
Aluminium Alloy Heel Connector
Cap of Aluminium Heel
Screws M6x15 2PCS
Headrest
Gas Lift
Wrench
Armrest 2PCS

Gasket 4PCS
3
PARTS OF THE CHAIR II
Backframe Screws M6x45 5PCS
Chassis Screws M6x35 4PCS
Armrest Screws M8x40 2PCS
Headrest Screws M6x20 2PCS
Headrest Screws Cover Cap
Cushion
Mechanism Components
Backframe

Remove the Cap from
the Aluminium
Connector.
4
ATTACHING THE FIVE-STAR-FOOT
Insert 5 of the Heels to
the Connector.
Pick the “Detachable
feet installation screws”
to install the heel.

Use the Wrench to
install all the screws.
5
ATTACHING THE CASTORS
Insert 5 of the Castors
at the bottom of the
Heel.
Insert the Cap back to
the Connector.

Insert the Gas Lift to the
Base.
6
ATTACHING THE GAS LIFT
Place the Mechanism
Component to the
Cushion Seat.
Pick the “Backframe
installation screws” to
install.

Make sure there are 4
short screws + 5 long
screws. (*colour may
varies)
7
ATTACHING THE MECHANISM
Insert 4 of the Gasket to
the shorter screw.
Insert 4 of the screws
with the Gasket and
install it with the
Wrench.

Gently attach the
Backframe to the
Cushion Seat.
8
ATTACHING THE BACKFRAME
Insert 5 of the longer
screws and install it
with the Wrench.
Pick the “Armrest
installation spare part”
to install the armrest.

Insert the screw into the
Armrest and Backframe.
Install it with the
Wrench.
9
ATTACHING THE ARMREST
Spot the R & L indicator
inside the Cover Cap.
Insert the Cover Cap to
the Armrest
accordingly.

Pick the “Headrest
installation spare part”
to install the Headrest.
10
ATTACHING THE HEADREST
Insert 2 of the screws
into the Headrest and
Backframe. Install it
with the Wrench.
Insert 2 of the Cover
Cap to the hole.

Insert the top part to
the bottom part of the
chair.
11
ATTACHING THE TOP & BOTTOM PART
You are now ready to sit
with Alterseat!

12
ADJUSTING YOUR SEAT

13
ADJUSTING YOUR SEAT
HEADREST
A. Height: Adjust in an upward and downward motion.
B. Angle: Tilt forward and backward.
A
B

14
ADJUSTING YOUR SEAT
ARMREST
C. Left and Right: Move armrest to angled left or right.
C

15
ADJUSTING YOUR SEAT
ARMREST
D. Foldable: Armrest can fold backwards.
D

16
ADJUSTING YOUR SEAT
LUMBAR SUPPORT
E. Adjust in an upward and downward motion.
E

THANK YOU
2022/2023
ALTERSEAT (M) SDN BHD
Add: B-1, 20, Jalan Persiaran Jalil 1, Bukit Jalil 57000 Kuala Lumpur.
Tel: [phone]
Web: https://alterseat.com/