Alton A7Q User manual

ITEM#: A7Q/A7F
Please do not return this item to the store where it was purchased
We appreciate your selection of our product. You can have confidence in this product that incorporates
quality components. Please do not return this item to where it was purchased, if any question, please
contact our Customer Service Department at 1-866-558 -0211 between 8:30am- 5:00pm(Pacific Time)
Monday through Friday, or E-mail us at [e-mail]
Quality statement
AFG is appreciates your selection of this product, we know you had many other choices. Please
pay attention that proper care and cleaning at home will extend the life of your purchase. Following
these important and helpful tips will enhance your furniture as it ages.
Upholstered furniture care instuctions
Please contact our Customer Service Department for assistance at [e-mail] Page 1 of 11
-Vacuum your upholstered furniture regularly. Small dust particles are very abrasive and can wear
furniture permaturely.
-Bolt spills immediately to prevent staining. If necessary, gently wipe away the spill using a soft, clean
cloth dampend with lukewarm water. Allow to dry and brush lightly.
-Never use harsh chemicals or solvents on your upholstered furniture as this may damage the finish.
-Never use water to clean your furniture as it may cause damage to the finish.
-If you choose to use a professional product, pretest the fabric in an inconspicuous area for any signs of
discoloration or shrinking.
-Marks and stains from pens, crayons and ink markers are difficult to remove. In the event that your
furniture becomes permanently stained, we recommend that you consult a professional expert.

J1PCE
Left Wing Back
K1PCE
Right Wing Back
H8PCS
Please contact our Customer Service Department for assistance at [email protected] Page 2 of 11
E2PCS
Side Rails
F2PCS
Support Legs
Side Rail Support Legs Slats
G 4PCS
B1PCE
Footboard Panel
C 2PCS
Wood Feet
D2PCS
Side Rails
A1PCE
Headboard Panel
L1PCE R1PCE
Left Headboard leg Right Headboard leg
PARTS LIST
PLEASE ALWAYS CHECK EVERY PART BEFORE ASSEMBLY

1
HARDWARE LIST
PLEASE ALWAYS CHECK EVERY PART BEFORE ASSEMBLY
24PCS 26PCS 34PCS
Please contact our Customer Service Department for assistance at [email protected] Page 3 of 11
452PCS
2PCS 618PCS
718PCS 88PCS
Allen Bolts Ø 5/16" x 1" Allen Bolts Ø 5/16" x 1 1/2" Allen Bolts Ø 5/16" x 2"
Allen Bolts Ø 5/16" x 2 1/4" Wood Dowel Ø 8 x 30mm Spring Washers Ø 5/16" x 9/16"
Flat Washers Ø 5/16" x 3/4" Screw M4 x 30mm Allen Wrench M5 x 2 1/2"
91PCE
This page lists all contents included in the box. Please take the time to identify the hardware
as well as the individual components to this product. As you unpack and prepare for assembly,
place the contents on a carpet or padded area to protect them from damage.
Electric Drill (not included)are necessary for assembly
Use an electric drill to tighten the wood screw

Please contact our Customer Service Department for assistance at [email protected] Page 4 of 11
Step 1:
Assemble the Wing Backs (J) & (K) and the Headboard Panel (A).
26PCS 66PCS
91PCE
76PCS
Allen Bolts Ø 5/16" x 1 1/2" Spring Washers Ø 5/16" x 9/16"
Flat Washers Ø 5/16" x 3/4" Allen Wrench M5 x 2 1/2"
BACK
J
K
A
7
6
2
9

Allen Bolts Ø 5/16" x 2"
34PCS 64PCS
7 4PCS 9 1PCE
Spring Washers Ø 5/16" x 9/16"
Flat Washers Ø 5/16" x 3/4" Allen Wrench M5 x 2 1/2"
Please contact our Customer Service Department for assistance at [email protected] Page 5 of 11
IMPORTANT ! !
IMPORTANT !
Please check your box spring
and / or mattress thickness
before your assembly.
BOX Spring
+Mattress Adjustable HeadBoard Heigh
10" ~ 14" T match 1# & 2#
14" ~ 18" T match 2# & 3#
18" ~ 22" T match 3# & 4#
A
9
3
6
7
L
R
K
J
BACK
Tips:
**Please also check the thickness of your mattress and box spring before your assembly.
Step 2:
Assemble the Headboard Panel (A) and the Legs (R & L).
(DO NOT FULLY TIGHTEN BOLTS AT THIS STAGE.)

Step 3:
Assemble the Footboard (B) & Wood Feet (C).
Step 3.1
Please contact our Customer Service Department for assistance at [email protected] Page 6 of 11
C
5
9
B
C
B
Step 3.2
42PCS
4
Allen Bolts Ø 5/16" x 2 1/4"
52PCS 91PCE
Wood Dowels Ø8 x 30mm Allen Wrench M5 x 2 1/2"

Please contact our Customer Service Department for assistance at [email protected] Page 7 of 11
Step 4:
Attach the Side Rail Support Legs (F) to join of the Side Rail (D) & Side Rail (E).
9
1
6
7
F
D
E
18PCS
Allen Bolts Ø 5/16" x 1"
68PCS
Spring Washers Ø 5/16" x 9/16"
78PCS
Flat Washers Ø 5/16" x 3/4"
91PCE
Allen Wrench M5 x 2 1/2"

Step 5:
Attach the Bolt ( ) 70% tight to the Headboard Leg (L) &(R) and Footboard (B) and then
attached Side Rail (D) & (E) to Headboard Leg (L) & (R) and Footboard (B) by pushing
the bracket down to fix it.
1
1
Step 5.1
Step 5.2
18PCS
Allen Bolts Ø 5/16" x 1"
91PCE
Please contact our Customer Service Department for assistance at [email protected] Page 8 of 11
Allen Wrench M5 x 2 1/2"
9
D
E
E
D

Phillips head screwdriver / Electric drill
(not included) are necessary for assembly
Use the phillips head screwdriver to
tighten the wood screw
Please contact our Customer Service Department for assistance at [email protected] Page 9 of 11
Step 6:
Attach Support Legs (H) to Slat (G), after that attach Slat (G) to Side Rail (D) & (E).
Tighten all the bolts once the bed is level.
8
G
Screw M4 x 30mm
91PCE
88PCS
18PCS
Allen Bolts Ø 5/16" x 1"
Allen Wrench M5 x 2 1/2"
Step 6.2
9
H
G
Step 6.1

Step 7:
Adjust the unit to be evenly aligned, then secure all the bolts completely and tightly.
Cover the fabric lining behind the headboard.
Please contact our Customer Service Department for assistance at [email protected] Page 10 of 11

Please contact our Customer Service Department for assistance at [email protected] Page 11 of 11
BOX SPRING
MATTRESS