Altos Pacifica King Bed User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 50mm 6 PCS
2JCBB BOLT M8 x 30mm 8 PCS
3JCBB BOLT M8 x 45mm 4 PCS
4JCBB BOLT M8 x 50mm 6 PCS
5M6 FLAT WASHER 6 PCS
6M8 FLAT WASHER 10 PCS
7M8 SPRING WASHER 10 PCS
8WOOD SCREW M3.5 x 16mm 8 PCS
9BED SLAT SIDE FITTER 26 PCS
10 BED SLAT CENTER FITTER 13 PCS
11 PVC BLACK WASHER 2 PCS
12 M4 ALLEN KEY 1 PC
13 M5 ALLEN KEY 1 PC
STEP 1
1 of 2
STEP A
STEP B STEP C
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BHEADBOARD LEG (L&R) 2 PCS
CFOOTBOARD 1 PC
DSIDE RAIL 2 PCS
ECENTER RAIL 1 PC
FCENTER SUPPORT 2 PCS
GCENTER SUPPORT LEG 3 PCS
HBED SLAT 26 PCS
IBED LEG 2 PCS
JHEADBOARD SUPPORT WOOD 2 PCS
KHEADBOARD SUPPORT RAIL 1 PC
LHEADBOARD WING (L&R) 2 PCS
A
B
B
JK
L
A
13 3
7
6
5 1 12
3444
7
6
13
7
6
3444
13
J
Altos Pacifica King Bed

* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
ASSEMBLY INSTRUCTIONS 2 of 2
STEP 2 STEP 3
HEADBOARD
STEP 4
Note: Make sure the sticker
"-> HEADBOARD" faced to
headboard [A]
Palm
Palm
STEP 5
STEP 6
C
D
E
F
D
G
H
H
H
I
11
13 2
8
EA
9
10