altura OP5003 User manual

INSTRUCTION
MANUAL
Altura Outdoor Rocking
V 1.0
Poly Adirondack Chair
SKU:OP5003

TOOLS REQUIRED
UP TO 30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
NOTICE
ALLEN WRENCH
(PROVIDED)
WRENCH
(PROVIDED)
PARTS
1 PC
CHAIR SEAT
A
1 PC
B
1 PC
C
HARDWARE
M6.3 x80mm
BOLT
M6 x 60mm
BOLT
M6x50mm
BOLT
M6 x 40mm
M6.3 x 40mm
BOLT
BOLT
2
4 PCS
2
1
8 PCS
Page 1 of 4
•Please do not exceed the weight limitations of this item.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and nuts before use.
•Reconfirm that all bolts, screws, and nuts are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
Do not overtighten screws. (Insert all screws before tighten screws.)
3
2 PCS
4 5
2 PCS
4 PCS
WRENCH
M6 WASHER
2
8 PCS
8
7
1 PC
6
8 PCS
M6 NUT ALLEN
WRENCH
9
1 PC
CHAIR
330 LBS
CAPACITY
LBS
RIGHT CHAIR ARM
CHAIR BACKREST
10
M6 x 80mm
BOLT
2 PCS
10

1 PC
LEFT CHAIR ARM
1 PC
RIGHT CHAIR LEG LEFT CHAIR LEG
G
1 PC 1 PC 1 PC
RIGHT ROCKING FEET
H I LEFT ROCKING FEET
I
1 PC
Page 2 of 4
PARTS
DF E
Look at following overall view of this chair and learn the exact position of each parts to be assembled.
PRODUCT ASSEMBLY - OVERALL VIEW
1
I
BACK RAIL
I
A
B
H
C
D
E
F
G

Attach part E Right Chair Leg to part A Chair Seat with 3 pcs of part 3 bolt , part 8 washer and part 7 nut
Do same to attach part F Left Chair Leg to part A Chair seat
Do not tighten screws too much at this stage.
PRODUCT ASSEMBLY
1
2
1
Attach part C Right Chair Arm to part E Right Chair Leg with 1 pc of part 3 bolt, part 8 washer and part 7 nut
Do the same to attach part D Left Chair Arm to part F Left Chair Leg
Page 3 of 4
3
3
F
D
F
3
66
C
D
C
2
A
F
2
F
A
E
8
7
CCD
E
E
F
3
8
7
33
87

Put part B Chair Backrest into part A Chair Seat and fix them with 2 pcs of part 4 bolt then attach part B
Chair Backrest to part C Right Chair Arm with 1 pc of part 2 bolt.
Do the same to attach part B Backrest to part D Left Chair Arm
Attach part G Back Rail to part A Chair Seat with 2 pcs of part 5 bolt.
PRODUCT ASSEMBLY
3
4
3
Attach part H Right Rocking feet to part E Right Chair Leg with 2 pcs of part 1 bolt and attach part H
Right Rocking feet to part A Chair Seat rear leg with 2 pcs of part 6 bolt
Page 4 of 4
Do the same to attach part I Left Rocking feet to part F Left Chair Leg and part A Chair Seat rear leg
Check and tighten all the bolts and screws again and finish the assembly.
2
4
5
2
4
5
B
C
G
A
B
H
I
1
1
6
4
5
1
2
1
6