Alula CAM-DB-HS2-AI Specification sheet

Quick Setup
Power Kit Installation
Doorbell Installation
Doorbell Setup
Get the Alula App

1
Box Contents
Doorbell (x1)
Mounting Plate (x2)
Pick the one for best
surveillance angle.
Plate Foam (x1)
Stabilize the
mounting plate
when installing it on
the rough surface.
Power Kit (x1) Drill Bit (x1) Screwdriver (x1)
Mounting Screw (x3)
Anchor (x3)
Wire Connector (x4)
Security Screw (x1)
Fixing Screw (x2)
Wire Harness (x1)
Fuse Wire (x1) U-shaped Wire (x2)
Tools You May Need
Drill (x1)

2
Basics
Reset Button
MIC
Doorbell
LED Indicator
QR Code
Faceplate Lens
Micro SD Card Slot
(Behind the cover)
Speaker
Terminals
Name Description
LED Indicator Red • Solid Red: Doorbell is starting up.
• Fast-flashing Red: Doorbell exception
(e.g.Micro SD card error).
Blue • Solid Blue: Doorbell is functioning properly.
• Fast-flashing Blue: Doorbell is ready for Wi-
Fi connection.
Micro SD Card
(sold separately)
Initialize the card in the Alula app before using it.
Reset Button Hold for 5seconds to reset and enter to Wi-Fi configuration
mode.
Get the Alula App
1.1. Connect your mobile phone to Wi-Fi (suggested).Connect your mobile phone to Wi-Fi (suggested).
2.2. Search for “Alula” in App Store or Google PlaySearch for “Alula” in App Store or Google PlayTMTM..
3.3. Download and install the Alula app.Download and install the Alula app.
4.4. Launch the app, and sign into user account.Launch the app, and sign into user account.

3
Wiring Overview
Alula doorbell with chimeAlula doorbell with chime
If you have mechanical chime or electronic chime installed in your home,
install the power kit and doorbell, and connect the wires as shown in the
figure below.
12VAC to 24VAC
12VAC to 24VAC
12VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Transformer
Doorbell
Mechanical Chime / Electronic Chime
Power Kit
Coil of t he door chime
0
3
Alula doorbell with no chimeAlula doorbell with no chime
If no chime is installed, skip power kit installation, install the doorbell,
and connect the wires as shown in the figure below.
Fuse Wire
12VAC to 24VAC
12VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Doorbell
Transformer
• We recommend installing a new transformer to bring the output 12 to
24 volts.
• Please refer to Quick Start Guide of your chime or transformer for the
chime or transformer installing details.

4
Power Kit Installation
The power kit ensures that your doorbell gets the power it needs, so be
sure to install it before you install your Doorbell.
1Shut off the electricity at the breaker that controls doorbell'sShut off the electricity at the breaker that controls doorbell's
circuit.circuit.
2Insert one end of the wire harness into the power kit.
3Remove the cover from your mechanical chime.
4Remove the existing chime wires in the terminals namedRemove the existing chime wires in the terminals named
TRANS and FRONT.TRANS and FRONT.
TRANSF RONTREAR REAR

5
5Connect the wire harness to the chime's terminals namedConnect the wire harness to the chime's terminals named
TRANS and FRONT.TRANS and FRONT.
6Insert the existing chime wire and the other end of the wireInsert the existing chime wire and the other end of the wire
harness into the wire connector and twist it tightly. Repeatharness into the wire connector and twist it tightly. Repeat
this step with the other chime wire.this step with the other chime wire.
Wire Connector
Wire HarnessChime Wire
7Mount the power kit to the side of the chime.Mount the power kit to the side of the chime.
8Put back the chime cover.Put back the chime cover.

6
Doorbell Installation
Recommended Installation Height: 1.2m (4ft) above the ground.
1Shut off the electricity at the breaker that controls doorbell'sShut off the electricity at the breaker that controls doorbell's
circuit.circuit.
2(Optional)(Optional) When the wall is uneven, paste the plate foam toWhen the wall is uneven, paste the plate foam to
the mounting plate.the mounting plate.
3Using your mounting plate as a template, mark the locationUsing your mounting plate as a template, mark the location
of the two mounting holes on your wall, and insert anchors,of the two mounting holes on your wall, and insert anchors,
then fix the mounting plate to the wall.then fix the mounting plate to the wall.
AnchorMounting Screw
Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).

7
4If you have a chime installed, follow Option A;
If not, follow Option B.
Option A Connect doorbell with your existing doorbell wires.Connect doorbell with your existing doorbell wires.
Power Supply: 12 to 24 VAC
U-Shaped Wire
Fixing Screw
Option B Connect the fuse wire with your existing doorbellConnect the fuse wire with your existing doorbell
wire.wire.
Fuse Wire
Fixing Screw
Power Supply: 12 to 24 VAC
5Install the doorbell to the mounting plate.

8
6Insert the security screw into the top of the mounting plate to
secure the doorbell.
7Restore the electricity at the breaker.
Doorbell is powered on when its indicator flashes blue quickly. If not,
make sure your electricity is off and check the wiring. If yes, proceed to
doorbell setup.
Doorbell Setup
1Add your doorbell to Alula app.
1. Remove the faceplate of the doorbell.

9
2. Log in to your Alula account.
3. In the Cameras tab, tap “+” on the upper-right corner
to go to the Scan QR Code interface.
4. Scan the QR code on the device or the cover of this quick
start guide when the indicator ashes blue.
5. Follow the wizard to add the doorbell to the Alula app.
If you want to change the Wi-Fi which your doorbell has
connected to, press and hold the reset button for 5s and
repeat this part.
6. Put the faceplate back.
2Choose the corresponding chime type.
1. In the Alula app, tap the Chime Type in the Device Settings
interface to go to the Chime Type interface.
2. Choose the chime type which you have installed in your
home.

10
Install the Micro SD Card
1. Remove the cover on the side of the doorbell with the
screwdriver.
2. Insert a micro SD card (sold separately) into the slot until
a click.
3. Place the cover back on, and tighten the screws with the
screwdriver.
After installing the micro SD card, you should initialize the card in
the Alula app before using it.
Initialize Micro SD Card
1. In the Alula app, tap the Storage Settings in the Device
Settings interface to check the micro SD card status.
2. If the card status displays as Uninitialized, tap to initialize
it.
3. The status will then change to Normal and it can store
videos.

11
Troubleshooting
1I have installed my doorbell, but the chime in my home
doesn’t function.
Please confirm the following details.
1. Make sure the right input voltage range (12V to
24V) has been used. Your doorbell is designed to
work with at least 12 volts of AC power, which is in
line with a majority of standard doorbell systems.
Doorbell running at a lower voltage (or runs on DC
rather than AC) may cause chime malfunction.
2. Select the right chime type (same as the product
label) in the Alula app.
3. Power on the doorbell and wait for 10 minutes to
3 hours, and then try again.
2I have failed to connect my doorbell to Wi-Fi.
1. Make sure your doorbell is not blocked by rewall or
any limitation in your network.
2. Do not connect too many devices to the router.
3. Make sure the static IP setting is disabled and
the router can distribute IP address to your device
(DHCP is on).
3My doorbell is oine frequently.
1. Make sure the doorbell has received strong and
stable Wi-Fi signal.
2. Make sure your router and the internet is functional.
3. The doorbell requires at least 2 Mbps uploading
speed, please make sure the bandwidth of the
network is sufcient, and do not have too many
devices connected to the router.
4. If all the troubleshooting techniques listed above
does not resolve the problem, please delete the
device from your Alula account, reset and re-add.

About this Manual
The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates
or other reasons.
Revision Record
New release – February, 2021
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,
IS PROVIDED “AS IS”, WITH ALL FAULTS AND LIMITATIONS, AND ALULA
DISCLAIMS ALL WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY,
INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF THIRD PARTY. ALULA DISCLAIMS ALL OTHER
OBLIGATIONS AND LIABILITIES WITH RESPECT TO ANY DEFECT OR
DEFICIENCY APPLICABLE TO OR RESULTING DIRECTLY OR INDIRECTLY
FROM THIS PRODUCT. IN NO EVENT WILL ALULA, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
INCIDENTAL, CONSQUENTIAL, PUNITIVE, INDIRECT OR SPECIAL DAMAGES,
INCLUDING, BUT NOT LIMITED TO, BUSINESS INTERRUPTION, LOST
PROFITS, LOSS OF USE, LOSS OF OPPORTUNITY OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT,
EVEN IF ALULA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
THE MAXIMUM TOTAL LIABILITY OF ALULA, REGARDLESS OF THE FORM
OF ACTION OR THE REASON FOR THE RECOVERY, SHALL BE LIMITED TO
DIRECT MONETARY NOT TO EXCEED THE ORIGINAL PURCHASE PRICE OF
THE PRODUCT.
ALULA IS NOT LIABILE FOR ANY DAMAGE AS THE RESULT OF THE
NEGLIGENCE OR WILLFUL MISCONDUCT OF DEALER, INSTALLER, USER OR
ANY THIRD PARTY; B) PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: (i) IMPROPER INSTALLATION OR USAGE
OTHER THAN AS REQUESTED; (ii) MODIFICATION OF THE PRODUCT NOT
MADE BY ALULA; (iii) COMBINATION OF THE PRODUCT WITH MATERIALS
OTHER THAN AS DIRECTED BY ALULA; (iv) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; OR (v) FORCE MAJEURE. IF THS
PRODUCT IS CONNECTED TO THE INTERNET, ALULA DOES NOT TAKE
RESPONSIBILITY FOR ABNORMAL OPERATION OF THE PRODUCT, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS.
SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY
JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS TO APPLICABLE LAW. ALULA SHALL NOT BE
LIABLE IN THE EVENT THAT THIS PRODUCT IS USED FOR ANY
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE FOREGOING AND THE
APPLICABLE LAW, THE LATTER PREVAILS.

Scan the QR code with the Alula App to add the device to your account
Please keep QR Code for further reference.

About this Manual
The Manual includes instructions for using and managing the product.Pictures, charts, images and all other information
hereinafter are fordescription and explanation only. The information contained in theManual is subject to change, without
notice, due to firmware updatesor other reasons.
Revision Record
New release – February, 2021
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND LIMITATIONS, AND
ALULA DISCLAIMS ALL WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING WITHOUT LIMITATION,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. ALULA DISCLAIMS ALL OTHER OBLIGATIONS AND LIABILITIES WITH
RESPECT TO ANY DEFECT OR DEFICIENCY APPLICABLE TO OR RESULTING DIRECTLY OR INDIRECTLY FROM
THIS PRODUCT. IN NO EVENT WILL ALULA, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY INCIDENTAL, CONSQUENTIAL, PUNITIVE, INDIRECT OR SPECIAL DAMAGES, INCLUDING, BUT
NOT LIMITED TO, BUSINESS INTERRUPTION, LOST PROFITS, LOSS OF USE, LOSS OF OPPORTUNITY OR LOSS
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF ALULA HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THE MAXIMUM TOTAL LIABILITY OF ALULA, REGARDLESS OF THE FORM OF ACTION OR THE REASON FOR THE
RECOVERY, SHALL BE LIMITED TO DIRECT MONETARY NOT TO EXCEED THE ORIGINAL PURCHASE PRICE OF
THE PRODUCT.
ALULA IS NOT LIABILE FOR ANY DAMAGE AS THE RESULT OF THE NEGLIGENCE OR WILLFUL MISCONDUCT OF
DEALER, INSTALLER, USER OR ANY THIRD PARTY; B) PRODUCT INTERRUPTION OR SERVICE TERMINATION
CAUSED BY: (i) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; (ii) MODIFICATION OF THE
PRODUCT NOT MADE BY ALULA; (iii) COMBINATION OF THE PRODUCT WITH MATERIALS OTHER THAN AS
DIRECTED BY ALULA; (iv) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; OR (v) FORCE MAJEURE.
IF THS PRODUCT IS CONNECTED TO THE INTERNET, ALULA DOES NOT TAKE RESPONSIBILITY FOR
ABNORMAL OPERATION OF THE PRODUCT, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS.
SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS TO APPLICABLE LAW. ALULA SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
FOR ANY ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE FOREGOING AND THE APPLICABLE LAW, THE LATTER
PREVAILS.

Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)This device must accept any interference received, includinginterference that may cause undesired operation.
Note: This product has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of
the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential
installation. This product generates, uses,and can radiate radio frequency energy and, if not installed and used
inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference willnot occur in a particular installation. If this product does cause harmfulinterference to radio
or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimumdistance 20cm between the radiator and your body.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSSstandard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2)this device must accept any interference, including interference thatmay cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved forthe transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen thatthe equivalent isotropically radiated power (e.i.r.p.) is not more than
thatnecessary for successful communication.
This equipment complies with IC RSS-102 radiation exposure limits setforth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & yourbody.
(i)the device for operation in the band 5150-5250 MHz is only for indooruse to reduce the potential for harmful interference
to co-channel mobilesatellite systems;
(ii)the maximum antenna gain permitted for devices in the bands 5250-5350 MHz shall comply with the e.i.r.p. limit; and
(iii)the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as appropriate.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
ce matériel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 énoncée dans un autre
environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre
corps.
(i)Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur

afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
(ii) le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz doivent respecter le pire limiter;
et
(iii) le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doivent respecter le pire limites
spécifiées pour le point-à-point et l'exploitation non point à point, le cas échéant.
Safety Instruction
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
BATTERY IS NOT USER REPLACEABLE.
Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the
package.
Customer Service
For more information, please visit alula.com. Need help?
Please visit alula.com/contact for our local contact details.