Alvarion BreezeMAX Si 4000 Instruction Manual

4Motion 802.16e CPE GA Release Notes Page 1 of 7
4Motion®802.16e CPE:
BreezeMAX Si 4000
Product Release Version 01.01.40.999
GARelease Note
April 2010
© Alvarion Ltd. All rights reserved.
The material contained herein is proprietary, privileged, and confidential. No disclosure thereof shall be made
to third parties without the express written permission of Alvarion. Alvarion reserves the right to alter the
specifications in this publication without prior notice.

4Motion 802.16e CPE GA Release Notes Page 2 of 7
General
This document details the main features, known limitations, version compatibility, bug fixing information and
the documentation available for the BreezeMAX Si 4000 product release 1.0. It corresponds to the following
software versions:
BreezeMAX Si 4000: 1.1.40.999
Configuration tool Ver. 1.8
Star ACS version: 2.8.5.5
4Motion BTS Ver. 2.5M
The CPEs that are released in this version include BreezeMAX Si 4000 series at 2.5 GHz and 3.5 GHz
BreezeMAX Si Overview
The BreezeMAX 4000 Si modem (CPE) is a WiMAX subscriber station designed to provide Internet access
for a home or small office. The unit includes one RJ-45 Ethernet port for LAN connection and one RJ-11
Voice over IP (VoIP) phone port. An 802.11b/g Wi-Fi module is included for providing a local WiFi access
point service. The CPE provides a web-based management interface for the configuration of all features.
There are three models available:
PN Description
725802 Indoor 1D/1V 2.5G
735241 Indoor 1D/1V 3.5G
735242 Indoor 1D/1V/WiFi 3.5G
Feature Highlights
Designed for WiMAX 802.16e fixed and nomadic users
Services: Data, Voice and Wi-Fi (3.5GHz only)
Frequency coverage: 2485-2690, 3400-3600 MHz
1 x Ethernet 10/100BT ports
1x FXS RJ-11 VoIP ports
WiFi 802.11b/g 54Mbps (for 3.5G only)
High Tx power (27dbm)
2 Integrated directional Antenna (~6dBi)
Networking:
oNAT
oMultihost
oDHCP
oIPCS rules – DSCP marking/filtering

4Motion 802.16e CPE GA Release Notes Page 3 of 7
Class-5 VoIP services
WiMAX Chipset: Beceem BCS5200
Remote management: web interface, TR069
Known Issues
Web may become inaccessible during heavy traffic. Notification is displayed to the user. WEB
access is attainable once the traffic is completed.
The Service Line default rules in operator web GUI must remain in order to enable registration to
VoIP and TR-69.
WiMAX Supplicant Root CA must be configured as Enabled when EAP TLS is used.
DTMF signaling is not supported for the Caller ID transmission.
In case Registrar Address is configured as IP and not as URL, the User Domain Name will be
used in the “From” header of outgoing INVITE messages in the GUI, otherwise it will be ignored.
In TR69- SW upgrade mode, the CPE indicates "TRANSFER MCOPMLETE" before final
completion stage (reboot).
KANON (Debugging Tool) may cause CPE malfunctioning during heavy traffic.
Documentation
BreezeMAX Si 4000 CPE Operator Manual
BreezeMAX Si 4000 CPE User Manual
BreezeMAX Si 4000 CPE Quick Installation Guide
Version Release Notes (this document)

4Motion 802.16e CPE GA Release Notes Page 4 of 7
Specifications
WiMAX Radio & Modem
Item Description
Radio Type IEEE 802.16e 2005 WAVE 2
Frequency Band 2.5 GHz - 2485~2690 MHz
3.5 GHz - 3400~3600MHz
Antenna Type High gain wide beam antenna
Channel Bandwidth 2.5 GHz - 5 and 10 MHz
3.5 GHz - 5, 7, and 10MHz
Antenna Technology Maximum-Ratio Combining (MRC)
Modulation Technique Scalable OFDMA employing Time-Division Duplex (TDD)
mechanism
PRBS subcarrier randomization
Contains pilot, preamble, and ranging modulation
FEC Coding Rates Up Link and Down Link: QPSK, 16 QAM, 64 QAM
QPSK and 16QAM - 1/2 and 3/4
64QAM - 1/2, 2/3, 3/4, 5/6
TPL (Transmit Power Level) +27 dBm typical (maximum)
Transmit Power Dynamic Range 45 dB
Channel Step Size In 250 kHz steps
Synchronization Shall be referenced to the WiMax BTS Timing Module.
Frequency Accuracy MRCT Compliant
Air Interface IEEE 802.16e Wireless MAN-OFDMA
TDD Duty Cycle (Tx/Rx) Rx up to 75% , Tx up to 50%
SISO or MIMO MIMO (1TX, 2RX )
Regulatory Compliance FCC parts 15, 25, 27
Frame duration 5 msec;
RF Transmitter Specifications
RF dynamic range 45dB minimum
Transmit Power Control Relative
Accuracy mRCT compliant

4Motion 802.16e CPE GA Release Notes Page 5 of 7
Transmit and Receive Switching
Gap 50uS
RF Receiver Specifications
Impedance 50 ohms nominal
Input return loss 10dBi
RX Sensitivity Typical 3dB better than mRCT in SISO mode, and 6 dB better in
MRC or MIMO mode. -94.5 dBm maximum.
Adjacent Channel Rejection 4dB min.
Receive signal 64QAM-3/4, 3dB above sensitivity level.
Non-Adjacent Channel Rejection 23dB min
Receive signal 64QAM-3/4, 3dB above sensitivity level.
Antenna Specifications
Antenna Gain Typical 5dBi
Antenna Connectors None. Embedded IPEX
Wi-Fi Radio Specifications
Radio Access Point modes IEEE 802.11b, IEE 802.11g
Frequency Range 2412 MHz - 2462 MHz (channels 1- 14)
Channel Bandwidth 22 MHz
Output Power@11g/54Mbps 15±1 dBm
Security 802.1x, WEP WPA2, WPA-PSK
Radio Technology Orthogonal Frequency Divisional Multiplexing (OFDM)
VoIP Specifications
Voice Signaling Protocol SIP v2 (RFC 3261)
SDP (RFC2327)
RTP/RTCP (RFC 1889/RFC 1890)
Voice Codec G711 (a-law and u-law)
G729a/b
G723
ILBC

4Motion 802.16e CPE GA Release Notes Page 6 of 7
Voice Quality VAD (Voice Activity Detection)
Echo cancellation (G.168)
Adaptive jitter buffer
DTMF tone detection and generation
Call Features Call ID
Outgoing caller ID block
Call transfer (blind/consultive)
Call waiting/hold/retrieve
Call waiting cancelation
Anonymous incoming call blocking
T.38 fax relay
Dial plan
Call forwarding: No Answer/Busy/All
Do not disturb
Redial/Redial on busy
Automatic call return
MWI and VMWI - message waiting indication
Performance Throughput
DL (matrix B), UDP, HARQ enabled, frame size is 512, 10M
Ratio is 62:38 (default)
Mechanical Specifications
Dimensions 232(H)*142(W)*36(D) mm
Weight 0.59 Kg
Mounting Desktop
Electrical Specifications
AC Power Supply Input: 100-240 VAC, 50-60 Hz, maximum power
consumption 0.5A
Output: 12 VDC, maximum power consumption 3.4A

4Motion 802.16e CPE GA Release Notes Page 7 of 7
Environmental Specifications
Operating Temperature 0ºC to 40ºC
Storage Temperature -20 to 55 °C
Humidity Maximum 95%, non-condensing
Standards Compliance
EMC FCC Part 15B
ETSI EN 301 489
Safety UL 60950-1
IEC 60950-1
EN 60950-1
Radio ETSI EN 302 623
ETSI EN 300 328
FCC 04-135, Part 15,25, 27
EN 302 544
Standards IEEE 802.16e-2005 WAVE 2
IEEE 802.3-2005 10BASE-T and 100BASE-TX
IEEE 802.3u
IEEE 802.11b and 802.11g
Table of contents
Other Alvarion Modem manuals