CipherLab 8000 Original operating instructions

Modem Cradle Quick Installation
Intended Purpose
Follow these steps to establish a connection:
1
2
3
In addition to charging the mobile computer, the Modem Cradle is specifically
designed for the mobile computer to communicate with a remote device via the
modem over the phone system.
Place the cradle on a flat and clean surface.
Connect the power supply cord to the power jack on the back of the cradle.
Connect the other end of the cord to a proper power outlet.
Seat the mobile computer in the cradle for charging.
For data communications with a remote device, connect the telephone line to the
line jack. You may use the phone cord to connect between a telephone and the
cradle via the phone jack.
www.cipherlab.com Copyright 2018 CipherLab Co., Ltd.
8000 Series
Modem Cradle
8300 Series
Modem Cradle
MR TD RD
8000/8300 Modem Cradle
Model
Spec
Power
Adapter
Input
Output
100~240 V, 50/60 Hz
5V DC
Power
Consumption
(5V DC)
Standby
Operating
275 mW: 55 mA for cradle only
300 mW: 60 mA when battery is charged to full
2850 mW: 570 mA while charging
3400 mW: 680 mA while charging with backlight on
400 mW: 80 mA when battery is charged to full
2950 mW: 590 mA while charging
3500 mW: 700 mA while charging with backlight on
Temprature
Operating
Storage
-10 C to 60 C
-20 C to 70 C
Operating
Storage
Humidity 10% to 90%, non-condensing
5% to 95%, non-condensing
EMC Regulations FCC, CE, RCM, IC, TBL, KC
To prevent from power surge, you may purchase a surge protector separately.
Connect the surge protector between the line jack and the phone line.
MR TD RD
ESC
BS
SP
1
4
7
23
56
89
ABC DEF
GHI
JKL
MNO
PQRS TUV
WXYZ
ALPHA
FN
0
/*
-
+$
%#
Modem Cradle
AlcorMicroAlcorMicro
Remote PC
Modem
Pn
h
o
e
L
i
n
e
P
h
o
n
e
L
i
n
e

Modem Cradle Quick Installation
8000 Series 8300 Series
12341234
MR RDTD
MR
TD
RD
Ports
Transmission Rate
Solid Red :Power ON
Off :Power OFF
Flashing Red :Transmitting data to the remote device
Off :No activity
Flashing Red :Receiving data from the remote device
Off :No activity
Serial :RS-232 port
Modem :Line jack (RJ-11)
Default to 57,600 bps
Up to 115,200 bps via the onboard DIP switch
MR: Modem Ready
TD: Transmit Data
RD: Receive Data
MR RDTD
P/N: S8XXXAQG02002 Version 2.00
1
2
3
4
Phone Jack (RJ-11)
Line Jack (RJ-11)
Indicators
Communications
Serial Port (RS-232)
Power Jack