Siemens Orcon Homehub User manual





Designed and made in Germany, the Orcon Homehub is a total
communication solution. Powerful, yet simple, it lets you connect
your PC to the Orcon network simply and quickly, and allows several
users to access the Internet simultaneously.
It combines an extensive range of functions with the latest Internet
technology and features a user-friendly web interface. It is simple to
operate and you can set it up in just a few minutes.
Discover how this small, discreet device can truly bring the world
into your home or business.
Please read the safety precautions carefully (at back of guide).
Please refer to the documents on the product CD for a detailed user
guide and approval and warranty information.


Note: The product pictures on this and the following
pages give an example. Depending on your device,
there may be differences in the appearance.
Black cable with grey
plug (ADSL)
Yellow cable (LAN)
Black cable with green
plug (Telephone line)
Mains adapter
User documentation
on CD-ROM
ADSL socket (black)
LAN socket (yellow)
Line socket (green)
PWR
Note: You will also
need a line lter to
use this product

PWR to power supply
LAN1 - LAN4 / WAN to PC
Not used in NZ
currently
ADSL to lter
Back panel
Bottom
Reset button


STEP 1: Connecting to the telephone jack
• Locate the black cable with grey plug (ADSL).
• Plug the clear end of the cable into the ADSL side of the lter.
• Plug the grey end of the cable into the ADSL port.

STEP 2: Connecting to your computer
• Locate the yellow cable (LAN, RJ-45).
• Plug one end of the yellow cable into the network card on the back
of your computer.
• Plug the other end of the yellow cable into the LAN1 port.

STEP 3: Connecting to the mains power supply
Mains adapter
• Locate the mains adapter cable.
• Plug the small end of mains adapter cable into the PWR socket on
the back of the modem.
• Plug the adapter end of the cable into the wall socket.
• Switch power on.

STEP 4: Launching the User Interface
• Start your web browser (Internet Explorer, Firefox etc) and enter the IP
address into the address bar as it appears below.
• Login screen appears.
• Type in the password and click  (the default password is ‘admin’).

STEP 5: Basic Setup Wizard
• Select the  option on the start screen to begin
conguring your modem.
The Basic Setup Wizard will guide you step-by-step through the general
conguration of the Orcon Homehub router.
Connection to the Internet is established via the Orcon Homehub for all PCs
connected to the network.
• Click .

STEP 6: Regional options
You can select your present location for the regional settings on this screen.
• Select  from the list of countries provided. You can set the
time so that it automatically switches to summer time and/or another time
zone of your choice.
• Click .
 The ADSL parameters and the selection of Internet service
providers will be set automatically on the following screens according to
the country you choose.

STEP 7: Conguring internet connections
Please follow the instructions to perform the initial conguration of your
internet connection on this screen.
• If you can’t nd  in the  eld, select .
• Enter your Orcon  (e.g. [e-mail]) and password.
• Leave the rest of the settings at their default.
• Click  to check the Internet connection. If successful, this
will bring up another window which you can then close. If unsuccessful,
please re-check all the information is correct and try again.
• Click .

STEP 8: Telephony
• End users are unable to edit VOIP settings directly. We update these
remotely from Orcon HQ. So simply click  to proceed.

STEP 9: WPS registration
Because the wireless broadcast is currently turned off you are unable to
use the WPS registration functionality. If you wish to set up the wireless
connection on your Homehub see the ‘Wireless Setup Guide’ which was
included with your Homehub.
• Click .

STEP 10: Summary
The basic settings you have made through the wizard are shown in the next
step for you to check.
• If you want to change the settings, click .
• If you want to conrm the settings, click  to close the Basic Setup
Wizard.
The Orcon Homehub is now congured and ready to connect to the
Internet. Once you click , the  will open
automatically. We strongly recommend using the Security Setup Wizard
to protect your Orcon Homehub against attacks. If you want to carry this
out at a later stage, un-tick 
.
If you would like to set up your Wireless connection now leave the Security
Setup Wizard checkbox ticked and follow the instructions in the ‘Wireless
Setup Guide’ that was included with your Homehub.


• Connect the cable to the designated port only and only use authorised
cables and accessories.
• Use a soft, dry cloth to clean the device. Harsh cleaning agents or
solvents are not suitable.
• Protect the device from moisture, dust, aggressive liquids and vapors
and do not use it in damp places (e. g. bath) or in explosive areas.
• Never open the device or plug-in power supply. The device may only be
opened by authorised specialist staff for safety reasons.
• The router may affect medical equipment. Be aware of the conditions of
your environment.
• Make sure you include these operating instructions when you pass on
your router to someone else.
• The ethernet and FXS function are only intended for one line within a
building.
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
This crossed-out wheeled bin symbol on the product means the product is
covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help
prevent potential negative consequences for the environment and human
health. It is a precondition for reuse and recycling of used electrical and
electronic equipment.
For more detailed information about disposal of your old appliance, please
contact your local council refuse centre or the original supplier of the
product.



Version: 25.07.2008
A31008-M705-C431-1-7643_barcode.fm / 3.6.08
$ 0 &  
Issued by
Siemens Home and Ofce Communication
Devices GmbH & Co. KG
Schlavenhorst 66
D-46395 Bocholt
© Siemens Home and Ofce Communication
Devices GmbH & Co. KG 2007
All rights reserved. Subject to availability.
Rights of modication reserved.
www.siemens.com/gigaset
A31008-M705-C431-1-7643_25-07-2008