Amate Audio HR-1215 User manual

User’s manual
HR-1215
Flying bar
April 2016

HR-1215 Apr 2016
2Amate Audio
The HR-1215 is an optional accessory for truss or bar mounting (vertical orientation).
HR1215 bar with ball lock
DIN7380 M8x30 screw (x2)
DIN7380 M10x20 screw (x1)
DIN7380 M10x35 screw (x1)
KT12
1- Place the box on the floor or in a
comfortable working position.
Unscrew two of the M8 top
screws.

HR-1215 Apr 2016
3Amate Audio
2- Set the HR-1215 bar as per the drawing below. Block it with the M8 screws
(DIN7380 M8x30) that you will find in your kit. Use point A and B.
COLUMN MOUNTING /MONTAJE EN COLUMNA FIJA
3- Remove the blocking screws from the flying fork.

HR-1215 Apr 2016
4Amate Audio
4- Set the flying fork onto the flying column. Block it with the screws that you have
removed in point 3.
5- Remove the safety screw from the HR-1215 bar.
6- Join the cabinet+HR1215 bar with the flying column+fork. Put the safety screw
that you have removed in point 5.

HR-1215 Apr 2016
5Amate Audio
7- Use the bar holes to tilt the cabinet as per
your desired inclination. Block it with the ball
lock pin.
8- Use the optional SC-15 safety cable around
the ACR-M8 eyebolt and fix it in a secondary
external point.
TRUSS MOUNTING / MONTAJE EN TRUSS
3- Use the special hook GT-50HR.
4- Set the hook onto the
truss.

HR-1215 Apr 2016
6Amate Audio
5- Remove the safety screw from the HR-1215 bar.
6- Join the
cabinet+HR1215 bar
with the hook. Put the
safety screw that you
have removed in
point 5.
7- Use the bar holes to tilt the cabinet as per your desired
inclination. Block it with the ball lock pin.
8- Use the optional SC-15 safety cable around the ACR-M8
eyebolt and fix it in the truss.