Amazfit T-Rex Specification sheet

Amazfit T-Rex Product Instruction Manual

Charging base × 1 Instruction Manual × 1Smartwatch with the band × 1
01 Package Contents
1

02 About the Watch
2
Note: If the watch is powered o and doesn’t turn on when you press and hold the power button,
the battery may be running low. Please charge the watch and try again.
Heart rate sensor
Charging plates
Power Button
/Select
Up
Down Back

03 Installing the App
3
The watch works with the Zepp App. The Zepp App helps you control your smartwatch and
all its functions.
1.
2.
Press and hold the power button to turn the watch on.
Scan the QR code on the Instruction Manual with your mobile
phone to download the Zepp App to your mobile phone. You
can also download the latest version of the Zepp App from the
Google Play Store or Apple App store.
Note:
1.
2.
For a better user experience, please use the most recent version
of the Zepp App.
The operating system needs to be Android 5.0, iOS10.0, or above.

1.
2.
3.
Open the Zepp App on your mobile phone and create an account. Please login if you already
have an account.
From the device list, select the watch you want to pair. Finish pairing by following the instructions
on the app.
Once the pairing is done, the watch will display the correct time. You can set the other watch
functions as needed.
Note:
Do not pair the watch directly using your mobile phone’s
Bluetooth. Follow the steps in the app to pair your watch
correctly.
4
04 Pairing the Watch

Only use the original charger to charge your watch. The charging plates on the back of the
watch should be aligned with those of the charger. Once the watch begins to charge, the
charging indicator will appear on the screen.
5
05 Charging the Watch
Note:
Only use the original charging base provided in the product
package to charge your watch. Also make sure that the
charging base is always kept dry.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2.This device must accept any interference received, including the interference that may cause
undesired operation.
FCC ID: 2AC8UA1919
Any changes or modifications that are not expressly approved by the party responsible for the
compliance may void the user’s authority to operate the device.
06 Regulatory Notice
6

7
Note: This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interferences in a residential installation. This device generates, uses,
and may radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
device o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
8

9
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that maycause undesired
operation if the device.
IC: 21806-A1919 CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and the maximum (or lesser) gain approved for the transmitter by Industry Canada.To
reduce the potential of radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risquesde brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
10

11
The following symbol signifies that this device has to be disposed separately from
ordinary household wastes at the end of its life. Please kindly be aware that this is your
responsibility to dispose the electronic device at recycling centers so as to help
conserve the natural resources.
07 Disposal and Recycling Information

12
08 Certifications and Safety Approvals
Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device
type A1919 is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
http://en.amazfit.com/support.html
For more regulatory information and product certification/compliance logos related
to Amazfit T-Rex, please go to Regulatory on your Amazfit T-Rex.

1.
2.
3.
4.
The device is water resistant with a certified rating of 5ATM. This means that the device is
resistant to rain and can be worn while showering. It may also be used in shallow-water activities,
such as swimming in a pool.
However, the watch should not be used when scuba diving, bathing, taking a sauna, or in other
activities involving a high-velocity of water or the submersion below shallow depth.
Please do not operate the watch underwater. After submerging, dry it with a dry cloth before
operating or charging.
The watch is not protected against chemical reagents, acidic or alkaline solutions, etc.
Defects caused by liquid damages are not covered under the warranty.
13
09 Safety Notice

14
10 Basic Parameters
Product model: A1919
Wireless connection: BT 5.0, BLE
Input: 5 V 500 mA MAX
Frequency: 2402–2480 MHz
Max. Output: 0 dBm
Operating temperature: 0°C to 45°C
Water resistance rating: 5 ATM
Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions

The Amazfit Limited Warranty covers Amazfit products against manufacturing defects
beginning on the original purchase date. The warranty period is 12 months or other period as
the applicable consumer laws in the consumer’s country of purchase require. Our warranty is in
addition to rights provided by applicable consumer laws.
Ocial website: en.amazfit.com
Support: support.amazfit.com
15
11 Warranty and Return Policy