INSTALLING YOUR
BLINK CAMERA
DOC020523
PRO TIP: Using your Blink app, test the
camera alignment before installing in your
backyard. The “welcome mat” should be
nicely centered.
1. Launch your Blink app.
2. On the main screen, select the
“controls” symbol adjacent to
your camera’s name. It looks like
this:
3. You will now be on the
Device Settings screen. From
here, select General Settings.
4. From the General Settings
screen, look for Status LED
about 2/3 down the screen.
5. Slide to the Off position. The
Status LED is now disabled.
Need technical support?
For help setting up your Blink camera, Wifi connection issues or questions
on using the Blink app, please contact Blink support directly at:
1-833-392-5465
Or Blink online support and chat at:
support.blinkforhome.com
p
?
DISABLING THE CAMERA’S BLUE RECORDING STATUS LIGHT
Your Blink camera has a blue LED status light on the front of the
camera which turns on anytime recording is in progress. This
will disturb nesting birds and must be disabled.
Although The Peep Show®loves and recommends the Blink camera, we have no association
with Blink and are not equipped to handle technical support. We always refer our bird lovers
directly to the Blink support center for the latest expertise on the Blink cameras and Blink app.
BLINK CAMERA INSTALLATION
