AMBROGIO L60 User manual

USER’S MANUAL
Ambrogio-MD-CT-RO-01-R5.2 10-2018
Zucchetti Centro Sistemi SpA
Via Lungarno,305/A
52028 - Terranuova B.ni (Ar)- Italy
Phone [phone]
Fax [phone] Ambrogio Robot

1User’s manual
EN
TABLE OF CONTENTS
General information. ................................................................................................................................................................... 2
Purpose of the manual................................................................................................................................................................ 2
Identication of manufacturer and equipment............................................................................................................................. 3
Safety information....................................................................................................................................................................... 3
Safety regulations. ...................................................................................................................................................................... 3
Safety devices............................................................................................................................................................................. 4
Safety signals.............................................................................................................................................................................. 5
Technical information. ................................................................................................................................................................ 6
Technical specications............................................................................................................................................................... 6
General description of the appliance........................................................................................................................................... 7
Main parts. .................................................................................................................................................................................. 8
Installation.................................................................................................................................................................................... 9
Packing and unpacking............................................................................................................................................................... 9
Planning of system installation.................................................................................................................................................... 9
Preparation and marking the boundaries of the work areas. .................................................................................................... 10
Slopes. ...................................................................................................................................................................................... 13
Steep slopes. ............................................................................................................................................................................ 13
Possible elements inside the work area and relative safety distances. .................................................................................... 14
Adjustments............................................................................................................................................................................... 15
Adjustment recommendations................................................................................................................................................... 15
Adjustment of cutting height...................................................................................................................................................... 15
Use and operation. .................................................................................................................................................................... 16
oblIGatIons foR Use.................................................................................................................................................................. 16
Description of robot commands. ............................................................................................................................................... 16
Meaning of led combinations. ................................................................................................................................................... 16
Start-up. .................................................................................................................................................................................... 17
Start-up via app......................................................................................................................................................................... 18
Operation with delayed start. .................................................................................................................................................... 18
Starting the robot with the sensors turned off. .......................................................................................................................... 19
Robot safety stop. ..................................................................................................................................................................... 21
Robot stop................................................................................................................................................................................. 22
Prolonged inactivity and restarting............................................................................................................................................ 22
Battery recharge after prolonged inactivity................................................................................................................................ 23
Operating tips............................................................................................................................................................................ 23
Ordinary maintenance............................................................................................................................................................... 24
Maintenance recommendations................................................................................................................................................ 24
Scheduled maintenance table................................................................................................................................................... 24
Robot cleaning. ......................................................................................................................................................................... 24
Troubleshooting guide.............................................................................................................................................................. 25
Troubleshooting. ....................................................................................................................................................................... 25
Part replacement. ...................................................................................................................................................................... 27
Recommendations for replacing parts. ..................................................................................................................................... 27
Battery replacement.................................................................................................................................................................. 27
Blade replacement. ................................................................................................................................................................... 27
Robot disposal. ......................................................................................................................................................................... 28
Ec declaration of conformity. ................................................................................................................................................... 29
Reproduction, even partial, of this document without written permission by the manufacturer is strictly forbidden. The
manufacturer assumes a policy of continual improvement and reserves the right to modify this document without prior notice
on condition that the changes do not constitute health and safety risks.
© 2008 – Text, illustrations and page layout by Tipolito La Zecca. The text may be reproduced, in whole or in part, on condition
that the author is mentioned.
MD-CT-RO-01-R5.2 - EN - 10-2018

2
User’s manual
EN
GENERAL INFORMATION
PURPOSE OF THE MANUAL
• This manual forms an integral part of the appliance and was produced by the Manufacturer to provide the necessary
information to people authorised to interact with it during its working life.
• Operators of the appliance must adopt correct working practices and must carefully read and follow all the instructions
contained in this manual.
• This manual is written by the Manufacturer in the original language of Italian and may be translated into other languages to
meet legal and/or commercial requirements.
• Carefully read the instructions contained in this manual to avoid any unnecessary risks to people’s health and safety, as well
as economic damages.
• Keep this manual in a safe and easily accessible place for quick reference.
• Some information and illustrations contained in this manual may not perfectly correspond with the appliance in your
possession; however, this does not affect its functioning.
• The Manufacturer reserves the right to make changes without any obligation to provide prior notice.
• The following symbols are used throughout this manual to highlight some particularly important information or to identify
some important specications.
Danger - Attention
This symbol indicates situations involving imminent danger, which, if ignored, could put people’s health and
safety at risk.
Warning – Caution
This symbol indicates situations where it is necessary to behave in a certain way in order to avoid putting
people’s health and safety at risk, and to protect the device.
Important
This symbol identies particularly important technical information which must not be ignored.

3User’s manual
EN
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The nameplate shown here is applied directly onto the appliance.
It contains references and all the information essential for safely
operating the device.
For any technical requirements, please contact the Manufacturer’s
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identication plate, the approximate hours of use and the type of
fault detected.
A. Name of manufacturer.
B. CE conformity label.
C. Model and Version / serial number / manufacturing year.
D. Technical data: voltage, current, protection rating, mass,
cutting width.
Serial Number :
Manufactured by Xxxxxxxxxxxxxxxxxx, Xxxxxxxxxxxxxxxxx
XXXXX Xxxxxxxxxxxxxxxxxxxxxxxx (XX) - XXXX
XXXXXXXXXXXXXX
MODEL TYPE MFG
(C) Manufacturing
year
(C) Model
(B) EC conformity
label
(A) Name of manufacturer
(D) Technical
specifications
(C) Serial
number
DATA PLATE
(C) Version
SAFETY INFORMATION
The manufacturer carefully considered the possible hazards and personal risks that may result from interacting with the
equipment. The purpose of this information is to inform users on the need to use extreme caution in order to avoid risks.
SAFETY REGULATIONS
THIS PRODUCT COMES WITH A BLADE AND IS NOT A TOY!
• Please read the manual carefully, especially the safety instructions, and make sure you
understand them fully before using the product. Only use the equipment for the purposes
specically intended by the manufacturer. Carefully follow the instructions on operation,
maintenance and repair.
• When using the robot, make sure there is no one in the working area, in particular children, the
elderly or disabled and pets. Otherwise, program the robot to operate during hours when there
is no one in this area. Keep an eye on the robot if you know that pets, children or other people
are in the area. If a person or animal is found on the robot’s path, stop it immediately.
• In working areas not bounded by a fence that can not be easily climbed over, supervise the
device during the operation.
• Warning signs shall be placed around the working area of the robotic lawnmower if it is used
in public areas. The signs shall have the following text: "Warning! Automatic lawnmower!
Keep away from the machine! Supervise children!"
• This robot is not suitable for use by children and people with reduced physical, sensory or
mental capabilities or inexperienced people who are not familiar with the product, unless they
are supervised by a person responsible for their safety or have received instructions on how
to use the appliance. Children should be supervised to ensure that they do not play with the
appliance.
• Do not allow the robot to be used by people who do not know how it works.
• Operators who perform maintenance and repair work must be fully conversant with its special
features and safety regulations. Before using the robot, carefully read the operating manual and
make sure you understand the instructions.
• Never remove, bypass or tamper with the safety devices installed. The Manufacturer shall not
be held liable if non-original spare parts are used. Failure to comply with this requirement may
seriously endanger the health and safety of people.

4
User’s manual
EN
• Check that there are no toys, tools, branches, clothing or other objects on the lawn which
can damage the blades. Any objects on the lawn can also damage or prevent the correct
functioning of the robot.
• Never allow people to sit on the robot. Never lift the robot to inspect the blade or to carry it while
it is running. Do not place hands and feet under the robot when it is in operation.
• Do not use the robot when a sprinkler system is running. In this case, program the robot and
the sprinkler system so that they do not operate at the same time. Do not wash the robot with
high-pressure water jets and do not immerse it in water, partially or completely, as it is not
watertight.
• Disconnect the power supply and activate the safety device before performing any adjustment
or maintenance that the user is authorised to perform. Use the personal protection devices
recommended by the Manufacturer, in particular, always wear protective gloves when handling
the cutting blade.
• Cleaning and maintenance must not be performed by unsupervised children.
• Do not use the robot when the cutting blade is damaged. Replace the cutting blade.
• Do not use the robot with damaged external parts. If the mechanical parts of the robot are
damaged, replace them.
• Do not use the robot if the power cord of the transformer is damaged. A damaged cord can lead
to contact with live parts. To avoid any risk, have the cord replaced by the manufacturer or by
its technical service centre or by a person with similar qualications.
• Visually check the robot regularly to make sure the blade, mounting screws and cutting
mechanism are not worn or damaged. Make sure that all the nuts, bolts and screws are
tightened to ensure that the robot is in good working condition.
• If the robot starts to vibrate abnormally during use, press “STOP” and disconnect the power
cord from the electrical socket.
• Never use and recharge the robot in explosive and/or ammable environments.
• Only use the battery charger and power supply unit supplied by the manufacturer. Improper
use may cause electric shocks, overheating or leakage of corrosive liquids from the battery.
If any liquid leaks, wash the battery with water/neutraliser; in case of contact with eyes, seek
medical attention.
SAFETY DEVICES
1. Obstacle detector
The bumper sensor is activated if the robot strikes a solid object greater than 9 cm (3.54 ") in height, which stops the movement
in that direction and moves backwards to avoid the obstacle.
2. Inclinometer
If the robot works on a slope which is steeper than the maximum limit, or tips over, the robot will stop the cutting blade.
3. Emergency stop switch
Located on the control panel with the word “STOP” larger than the other commands on the keypad. Pressing this button at any
time during operation will immediately stop the movement of the lawnmower robot and the rotation of the blade will stop.
4. Over-current protection
Each motor (blade and wheels) is monitored continuously during operation for any situation that may cause them to overheat. If
this occurs in the wheel motor, the robot will attempt to move in the opposite direction. If the over-current persists, the robot will
stop and signal an error. If the cutting blade motor overheats, there are two intervention ranges. If the parameters fall within the
rst range, the robot will perform the manoeuvres to unblock the cutting blade. If the over-current is below the protection range,
the robot will stop and signal a motor error.

5User’s manual
EN
SAFETY SIGNALS
Read user instructions carefully
to understand meanings before
using the machine.
STOP
Do not touch the rotary blade
and do not place your hands or
feet underneath the machine
when it is running. Wait until
the blade and rotating parts
come to a complete stop before
accessing.
Do not ride on the machine.
STOP
Operate the safety device
before working on or lifting the
machine.
Keep an adequate safe distance
from the machine while it is
running.
While the robot is working,
make sure there are no people
in the working area (especially
children, elderly or disabled
people) and pets. Keep children,
pets and other people at a safe
distance when the machine
is functioning. To prevent that
risk, we advise scheduling the
robot's mowing activities at
suitable times.
Warning! Do not spray water on
the machine to clean or wash it.
While the robot is working,
make sure there are no people
in the working area (especially
children, elderly or disabled
people) and pets. Keep children,
pets and other people at a safe
distance when the machine
is functioning. To prevent that
risk, we advise scheduling the
robot's mowing activities at
suitable times.
Use the robot only with the
power supplies indicated in
the “Technical Data” of the
“Technical Information” chapter.

6
User’s manual
EN
TECHNICAL INFORMATION
TECHNICAL SPECIFICATIONS
Description
Model
7060DE0
Version A B
Maximum recommended surface that can be mowed
Working capacity ( -20%(*)) m2 (sq ' ) 200 ( 2150' ) 400 ( 4300' )
Daily cycles required to cover the
maximum area (*) 2 in case of complex gardens and gardens with fast-growing grass
Features
Dimensions (W x H x D) mm 409x199x335
Robot weight (incl. battery) kg 8,3 8,6
Cutting height (Min-Max) mm (") 42-48 ( 1.65-1,88 " )
Diameter of blade with 4 cutting
edges mm (") 250 ( 9,84 " )
Drive system 4WD
Cutting blade speed RPM 4000 cutting
3000 maintenance
Ground speed Metres / Minute 18 (59 ')
Maximum recommended slope
managed (*) %
50%. Allowable, based on the lawn conditions and accessories
installed.
40%. maximum managed and recommended in conditions of a
trimmed lawn.
Ambient operating temperature Max °C ROBOT -10°(14 F.) (Min) +42° (107 F.) (Max)
BATTERY CHARGER -10°(14 F.) (Min) +40° (104 F.) (Max)
Measured noise level dB(A) 65
Water protection class IP ROBOT: IPx3
BATTERY CHARGER: IPx4
Electrical features
Power supply unit (for lithium battery)
Mean Well OWA-60E-30ZCT
Input: 100 - 240 V~; 1.2 A;
50/60 Hz; Class 2
Output: 29.4 V ; 2.0 A;
Type of accumulator and charging batteries
Rechargeable Lithium-Ion Battery 25.9V - 5.0Ah 25,9 - 7.5Ah
Battery charger 29.4 Vcc - 2.0 Ah
Average recharging time hh:mm 3:00 4:30
Average mowing duration after a full
charge cycle (*) hh:mm 2:00 3:00
(*) Depends on the condition of the grass, lawn and the complexity of the mowing area.

7User’s manual
EN
Frequencies
Bluetooth Frequency band of work (MHz) 2402 - 2480
maximum radio frequency power (dBm) < 14
Equipment / Accessories / Functions
Grass detection sensor (patented) N. 6
Curb drop-off sensors (Step) standard
Mowed lawn detection sensors standard
8-pronged blade
Specically for early season rapid growth and for lawns that need
greater mowing power.
optional
(*) Depends on the condition of the grass, lawn and the complexity of the mowing area.
GENERAL DESCRIPTION OF THE APPLIANCE
The appliance is a robot designed and built to automatically cut
grass in gardens and lawns at any time of the day.
It is small, compact, silent and easy to handle depending on the
type of lawn that is being mowed.
During operation, the robot mows the area delimited by paving
and/or barriers (fences, walls, etc.).
When the robot detects that there is no grass or encounters an
obstacle, it changes route in a random manner and starts mowing
again in a new direction.
Based on its operating principle (“random”), the robot automatically
mows the entire delimited area of the lawn (see gure).
RANDOM OPERETION
The maximum lawn surface that the robot can mow depends on a series of factors, such as:
• the characteristics of the area (irregular perimeters, uneven surfaces, divided areas, etc.).
• the characteristics of the lawn (type and height of the grass, humidity, etc.).
• the condition of the blade (level of sharpness, grass or debris buildup, etc.).
• the model of the robot and type of batteries installed.

8
User’s manual
EN
MAIN PARTS
MODEL 7060DE0
1Robot �
2Battery �
3Power Supply Unit �
4Mother board �
5Control keyboard �
6Cutting blade �
7Electric motor �
8Electric motor �
9Sensors �
10 Curb drop-off sensors �
11 User manual �
12 Charging jacks �
5
13
2
6
7
4
8
9
9
10
12
11

9User’s manual
EN
INSTALLATION
PACKING AND UNPACKING
The equipment is delivered suitably packaged. When unpacking, carefully remove and check the integrity of the parts.
Warning – Caution
Keep plastic wrapping and plastic containers away from infants and children: risk of suffocation!
Important
Keep the packaging materials for future use.
PLANNING OF SYSTEM INSTALLATION
The robot is not difcult to install, but requires some preliminary planning in order to dene the best area for installing the power
supply unit.
Position the power supply unit in an easy to access zone.
-The power supply unit must be in a well-ventilated area,
protected from direct sunlight and exposure to the elements.
-The power supply unit must not be in direct contact with the
ground or humid environments.
Warning – Caution
Position the power supply unit in an area that
cannot be reached by children. For example, at a
height above 160 cm (63 ").
Warning – Caution
When connecting the electricity, it is necessary that a power outlet is positioned near the installation area.
Make sure the connection to the mains power complies with the applicable laws. To operate in complete
safety, make sure the electrical system, which is connected to the power supply unit, is equipped with a well-
functioning earthing system. The supply circuit shall be protected by a residual current device (RCD) with a
tripping current of not more than 30 mA.
Important
It is advisable to install the unit in a cabinet for electric components (for outdoor or indoor use), equipped
with a key lock, and well-ventilated to maintain a correct air circulation.
Warning – Caution
Make sure only authorised people have access to the power supply.

10
User’s manual
EN
PREPARATION AND MARKING THE BOUNDARIES OF THE WORK AREAS
preparation of the lawn to be mowed
1. Make sure that the lawn to mow is even and does not contain holes, stones or other obstacles. Otherwise, prepare the lawn
by lling in any holes and removing any obstacles. If some obstacles cannot be removed, it is necessary to properly dene
and protect the interested areas.
2. Check that all the areas of the lawn do not exceed the allowable slopes (see “Technical Specications”).
The sensors, which recognise the presence of the grassy surface, allow the robot to move freely inside the lawn. The lawn must
be suitably checked and adjusted so that the robot has enough space for recognising when there is no grass. Carefully follow
the below points for the correct and safe use of the robot.
OK
WALL
higher than
9 cm. / 3,5 "
HEDGING SMALL ARCHES
PAVING
wider than 35 cm. / 13.8 "
Minimum width of 5 cm / 1.9 in.
with drop-off sensor on and step
depth of at least 5 cm / 1.9 in.
Types of boundaries/protections that can be used for correctly dening the limits of the robot’s work area.
Pavement
With the drop-off sensor on, the robot requires a curb of at
least 5 cm and a step depth of at least 5 cm. Curbs less than 5
cm wide or steps less than 5 cm deep must be protected with
additional pavement, or alternatively, by placing arches in the
ground, as shown in the gure, so that the robot can run into
them and change direction.
If the robot is not equipped with a drop-off sensor or if the sensor
is off, a pavement of at least 35 cm is needed for it to stop safely
and change direction.
> 35 cm (13.8 ")
< 5 cm
< 5 cm
> 5 cm
> 5 cm
Wall
Perimeter wall, which denes the boundary of the work area at
a height above 9 cm. (3.54 "). If the walls are shorter, protect the
area with arches or adequate paving.
minimum high
9 cm. (3,50 ")
OK

11 User’s manual
EN
Hedging
The work area can also be effectively delimited by hedges.
OK
Holes
The work area cannot be delimited by ditches or holes which
must not be present inside the grassy area to mow. Before
starting the robot, check that there are no objects on the lawn
such as toys, small stones, branches or sprinklers protruding
from the ground which could impede correct functioning or
cause damage to the blade.
NO
Obstacles and protections
The illustrations show an example of the internal and peripheral elements of the correct work area. If elements such as tree
roots or exposed wires are present, it is necessary to delimit the perimeter of these elements with paving, walls or barriers to
prevent the malfunctioning of the robot. Elements (trees, poles, etc. ref. g. obstacles) which do not impede the robot’s normal
functioning do not require delimiting.
OK
OK

12
User’s manual
EN
Roots
Do not, under any circumstance, leave areas which have not
been delimited by barriers inside the work area, as these will
prevent the robot from functioning properly (roots, external
pipes, work tools, etc.).
NO
Fine gravel
Danger - Attention
If ne gravel, leaves or small stones are used to
border the lawn, they are not detected correctly
by the robot. Protect the lawn with other borders.
OK
NO
Sharp corners
Danger - Attention
In areas of the lawn that end in narrow spaces as
shown in the gure, the robot cannot move easily,
therefore this part of the lawn must be excluded
because the robot would exit the borders.
NO

13 User’s manual
EN
SLOPES
Check that all the areas of the lawn do not exceed the admissible slopes (see “Technical Specications”).
Areas with steeper slopes or that are incompatible with the correct functioning of the robot (see following points) cannot be
mowed. Steeper slopes must be delimited.
Important
The sensors of the robot can detect slopes greater than the robot can manage. The direction is reversed
in order to prevent the robot from tipping over or malfunctioning. In addition, as a further protection, it is
necessary to delimit the areas, which have slopes that cannot be managed. It is recommended to test the
robot when using for the rst time on slopes that are at the limit of the specications.
UPWARD SLOPE
+ 0-40%
100 cm (39,3 ")
40 cm
(15,74 ")
+ 40 %
OK
Greater than 1 m. / 39,3 "
included between 0 and +40%
DOWNWARD SLOPE
- 0-40%
100 cm (39,3 ")
40 cm
(15,74 ")
- 40 %
OK
Greater than 1 m. / 39,3 "
included between 0 and -40%
The robot can tackle height differences with a slope of up to 40% provided that they gradually slope down over a distance of
more than one metre.
STEEP SLOPES
The robot’s safety system will interpret sudden changes in the slope (greater than 25%) as an anomaly and therefore, will
reverse the direction and bring the robot back to safety continuing to mow the lawn. Tree trunks which gradually rise from
the ground or stones positioned to mark the boundary of ower-strips which gently descend onto the grassy surface are also
interpreted as slope changes.
Important
Check the robot when using for the rst time on slopes that are at the limit of the specications.
UPWARD SLOPE
+ 0-25%
100 cm (39,3 ")
25 cm
(9,84 ")
+ 25 %
OK
included between 0 and +25%
DOWNWARD SLOPE
- 0-25%
100 cm (39,3 ")
25 cm
(9,84 ")
- 25 %
OK
included between 0 and -25%
The robot can tackle height differences with slopes of up to 25% if they slope down suddenly.

14
User’s manual
EN
Important
Areas with slopes greater than those specied cannot be mowed with the robot.
POSSIBLE ELEMENTS INSIDE THE WORK AREA AND RELATIVE SAFETY DISTANCES
APPROPRIATE POOL PREPARATION
Minimum pavement width of
70 cm. / 27,5 "
minimum wall height of
9 cm. / 3,5 " protection arches
minimum width of non-grassy
ground of 100 cm / 39,37 " OK
WATER
The gure above shows a work area which has been correctly delimited for the correct functioning of the robot.
Important
Foliage is usually detected as grass. In case of foliage, we suggest to increase the distance from the edge by
about 20 cm (7,88 ").
INAPPROPRIATE POOL PREPARATION
Pavement width less than
70 cm. / 27,5 "
wall height less than
9 cm. / 3,5 " land width less than
100 cm / 39,37 "
no presence of non-grassy ground NO
WATER
The gure above shows a work area where the robot’s operating areas have not been correctly delimited, thus preventing it from
functioning properly.

15 User’s manual
EN
ADJUSTMENTS
ADJUSTMENT RECOMMENDATIONS
Important
The user must follow the procedures described in this manual when making any adjustments. Do not make
any adjustment which is not expressly indicated in this manual. Any special adjustments, not expressly
indicated in this manual, must only be carried out by personnel from the Manufacturer’s Authorised Service
Centres.
ADJUSTMENT OF CUTTING HEIGHT
1. Stop the robot safely by pressing the “ON/OFF” key (see
“Robot safety stop”).
2. Turn over the robot and position it so as not to ruin the
covering hood.
Important
Use protective gloves to prevent injury to your
hands.
3. Unscrew the screws to remove the blade.
4. Insert or remove the spacer to adjust the cutting height.
5. Reposition the blade and fasten the screws.
6. Turn the robot over to its operating position.
INSERT SPACER AND BLADE WITH SCREWS
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
Important
Reduce the cutting height gradually. It is recommended to add the spancer every 2÷3 days until the ideal
height of the grassy surface is reached gradually.

16
User’s manual
EN
USE AND OPERATION
OBLIGATIONS FOR USE
Important
-When using the robot for the rst time, it is recommended to carefully read the entire manual and to
fully understand it, especially the safety information.
-Only use the robot for the uses intended by the Manufacturer and do not tamper with any device to
obtain different performances.
-Avoid using the robot and its peripherals in bad weather conditions especially when there is a risk of
lightning.
DESCRIPTION OF ROBOT COMMANDS
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
(D)
PLAY
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
OFF
(C)
The illustration shows the position of the commands on the machine.
D. ON/OFF: press to turn the robot on and off.
C. PLAY/PAUSE: press to start or stop the robot when it is on standby.
MEANING OF LED COMBINATIONS
IN OPERATION ROBOT
A. HIGH BATTERY: (GREEN LED STEADY ON)
full battery level.
PLAY
OFF
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
(A)
(B)
(C)
(D)
B. LOW BATTERY:
1
(RED LED 1 FLASH)
medium battery level.
(RED LED STEADY ON)
low battery level.
C. PLAY/PAUSE: (YELLOW LED STEADY ON)
in pause / in pause due to low battery.
(YELLOW LED SLOW FLASHING)
Robot in standby. Press the PLAY/PAUSE
key to display the status of the LEDs.
1
(YELLOW LED 1 FLASH)
the lawn has been mowed.
2
(YELLOW LED 2 FLASHES)
no lawn present.
D. ON/OFF: (GREEN LED STEADY ON)
robot in operation.

17 User’s manual
EN
RECHARGING ROBOT
A. HIGH BATTERY: (GREEN LED STEADY ON)
full battery level.
PLAY
OFF
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
(A)
(B)
(C)
(D)
1
(GREEN LED 1 FLASH)
medium battery level.
B. LOW BATTERY: (RED LED STEADY ON)
low battery level.
C. ON/OFF: (GREEN LED STEADY ON)
robot in operation.
START-UP
1. Check that the grassy surface of the lawn to mow is at a
height which is compatible with the proper functioning of the
robot (see technical specications).
2. Adjust the desired cutting height (see cutting height
adjustment).
3. Check that the work area is correctly delimited and that there
are no impediments to the correct functioning of the robot
as indicated in the section “Preparation and dening the
boundaries of the work areas” and following sections.
4. Position the robot near the charging zone.
5. Lift the door of the charging connector. Insert the charging
connector. Once connected, the robot turns on automatically
and displays the battery charge level (see “meaning of led
combination”).
6. At the end of charging, disconnect the robot and press the “ON/OFF” button. On rst use, always charge the batteries for at
least 4 hours.
7. Position the robot inside the grassy surface in an area where the grass is at least 1 metre (40.00 ") from any obstacle.
8. Press the “OFF/ON” key and wait a few seconds for the robot to turn on completely.
9. Press “PLAY/PAUSE” key to start the robot.
Once the robot has stopped due to the reasons described in the chapter “Robot Stop”, activate the safety stop and reposition
the robot inside the power supply unit for recharging.
Important
For a better cutting performance and correct functioning of the recognition sensor, do not start the robot in
case of rain or in very humid conditions. The best results are obtained in the middle of the day.

18
User’s manual
EN
START-UP VIA APP
The robot has a built-in Bluetooth device that allows it to be programmed and controlled via a smartphone.
Download the application from Google Play or the Apple Store using your smartphone or tablet. Start the application and follow
the wizard to pair the Robot to your device.
The factory set PIN is “0000.” Change the PIN as soon as possible to make the robot safe.
The application allows you to:
• start and stop the robot;
• delay the start of the robot;
• guide the robot during the mowing cycle;
• change the status of the sensors;
• display the status, alarms and any errors.
OPERATION WITH DELAYED START
If necessary, the robot can be delayed to start by up to 24 hours.
Press the “OFF/ON” button. After a few seconds the robot switches completely on. Press briey the “OFF/ON” button at intervals
of 1 second, as many times as the hours of delay of departure.
On completion of the sequence, wait for the robot to conrm the delay setting with the sound of a beep.
The robot will be in standby until the working cycle resumes the established time.
Important
In case of errors, turn off the robot by keeping the “ON/OFF”button pressed, and resume the start-up sequence.
OPERATION WITH DELAY OPERATION
With the robot in PAUSE mode,
press the “ON/OFF”
button for each hour of delay
The Robot goes into STAND-BY
waiting for the preset departure time
Wait
Press “PLAY/PAUSE”
e.g. 4 times =
4 hours
4 beeps =
4 hours

19 User’s manual
EN
STARTING THE ROBOT WITH THE SENSORS TURNED OFF
In certain lawn conditions, the robot can be started with the lawn and curb drop-off sensors deactivated, which means the robot
can be started when lawn conditions are such that correct functions are not guaranteed, for example with very short or patchy
grass.
This mode requires very special attention from the user, and the dealer should be consulted before attempting to operate in this
mode.
When the robot is on Pause, these modes can be activated following this procedure:
Grass Sensor Off – Curb drop-off sensor On:
Press the “PLAY/PAUSE” button and keep it pressed for 4 seconds
until 2 consecutive beeps are heard and the PAUSE led ashes
twice. This mode must only be used on models with the curb drop-
off sensor installed, and it allows working with just the 4 curb drop-
off sensors. This mode is recommended in gardens where the
lawn is lower than the sensors but still very uniform.
GULF
5 cm / 1,9 "
5 cm / 1,9 "
With the curb drop-off sensor installed,
minimum width
GRASS SENSOR OFF - CURB DROP-OFF SENSOR ON
Keep the “PLAY/PAUSE” button pressed
for 4 seconds.
Release the button
Wait for
2 beeps 2 flashes
+
4 sec.