AMC FM/AM/CD Player User manual

Important
Do not install this equipment in a confined
space such as a book case or similar unit.
The apparatus should not be dripped or
splashed and no objects filled with liquids,
such as vases, should not be placed on the
apparatus.
This unit should not be used near water (e.g.
near bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a
swimming pool, etc.) are should be taken so
than objects do not fall and liquids are not
spilled into enclosure through openings.

ONTENTS:
Before you start
Introductions 4
Installation 4
Accessories 4
Operation
Front panel 5
Operation 5
Specifications
General 9

Introductions
This FM/AM/ D Player is fully designed for compressed audio files supporting and FM/AM receiving. RDS
function is available too.
Installation
Accessories
The accessories which are included in the box are:
•Antenna
•onnection cable
•User manual
•Antenna socket
•Front screws
•Mounting screws
•Screw for antenna socket.

Front Panel
1. Power ON/OFF switch 7. Auto seek button
2. L D display 8-9. Auto or manual tuning (for radio mode)
3. D Slot next and previous track (for D mode)
4. Mode button 10. Preset stations (for radio mode)
5. AF Function (Alternative frequencies) D control (for D mode)
6. BAND button 11. Functions selection/volume control
12. EJE T button
Operation
•POWER ON/OFF
By pressing this key, the unit is switched on and off. This unit is turned on by pressing any key.
•SELE T and VOLUME KNOB
Rotate Volume up/down knob to control the VOLUME to select other functions, press the
button shortly until the desired functions is shown on the display. Picture below shows how control
functions are selected using the SELE T button
•TA SEEK/TA ALARM
When press the SELE T button for more than 2 seconds, it is activated as selecting mode of these
function: TA SEEK Mode or TA ALARM mode. These functions are selected by rotating the volume
knob.
TA SEEK mode:
When newly turned station does not receive TA information for 5sec, the radio retunes to next
station which has not the same station (PI) as the last station, but has the TA information. In
TA seek mode, the current station can be changed to the completely different station because
the unit searches TA station when the field strength of the current station is very weak, or thec
urrent station has no TA signal.
TA ALARM mode:
Any automatic retune mode is not activated, just can be heard Beep sound.

•PI MUTE / PI SOUND
When press the SELE T button for more than 2 seconds, it is activated as selecting mode of these
function.
PI SOUND: Beep sound enabled.
PI MUTE: Beep sound disabled.
•RETUNE L/S
When press the SELE T button for more than 2 seconds, it is activated as selecting mode of these
function.
RETUNE L: Select 90 seconds as the initial time of automatic TA search.
RETUNE S: Select 30 seconds as the initial time of automatic TA search.
•MASK DPI
When press the SELE T button for more than 2 seconds, it is activated as selecting mode of these
function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with field strength.
•BEEP MODE
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
•MODE BUTTON (MODE)
By pressing this key, user can select RADIO mode or D PLAYER mode.

•AF/REGFUNKTION (ALTERNATIVE FREQUEN IES)
When press short, AF/REG switching mode is selected. When AF/REG switching mode is selected,
the radio checks the signal strength of the AF all the time. When press long, it is activated as
regional mode ON/OFF.
Regional mode ON: AF switching or PI SEEK is implemented to the station which have all PI codes
same as current station. REG segment is turned on in L D display.
Regional mode OFF: The regional code in the format of PI code is ignored when AF switching or PI
SEEK is implemented.
•BAND BUTTON (BND)
Each band is toggled cyclically by pressing this key FM1-FM2-FM3-MW1-MW2.
•AUTO SEEK SEAR H TUNING (AS/PS)
By pressing shortly, the radio searches for each preset Station. When field strength level is bigger
than the threshold level of stop level, the radio is holding at that preset number for 5 secretary. With
releasing mute, and then searches again. By pressing longer than 1 sec., and then 6 strongest
stations are preset to the corresponding preset number. When AS operation is finished, the radio
executes the preset scan.
•AUTOMATI OR MANUAL TUNING (FREQ UP OR FREQ DOWN )
RADIO MODE:
When pressed short, these keys are operated as manual tuning mode.
When pressed longer than 1 sec., they are operated as seek tuning mode.
D/MP3 PLAYER MODE:
When pressed short, they are operated as TRA K UP or TRA K DOWN mode.
When pressed longer than 1 sec., they are operated as UE or REVIEW mode.
•D EJE T BUTTON
Press the EJE T button to remove the D.
•PLAY/PAUSE BUTTON ( )
During PLAY mode, press PAUSE button (13) to PAUSE. Press it again to resume play.
•INTRO BUTTON All Tracks preview (INT)
When this button is pressed, INT indication is displayed and the first several seconds of each
track of the disc are played. Press again to stop intro and listen to track.
•REPEAT BUTTON (RPT)
When this button is pressed, RPT indication is displayed and play of the selected track will be
continually repeated until the Track Repeat mode is cancelled by pressing RPT button again.
•RANDOM BUTTON (RND)
When this button is pressed, RDM indication is displayed and each track of the disc is played in
random instead of normal progression. To cancel RANDOM mode, press RDM button again.
•PRESET STATIONS (1, 2, 3, 4, 5, 6)
RADIO MODE:
When press short, these keys select a preset station directly. When press longer than 1 sec.
current station is stored in preset memory bank.

•SEAR HING TRA K
Press "A/PS" , then searching track is activated.
With "VOL / VOL "knob, select first digit you want.
Press SEL and the selected song will starts.
•SEAR HING BY HARA TER
Press A/PS 3 times, then character search mode is activated.
Press enter SEL button, and then A character is displayed.
With VOL+ / VOL- knob, you can select the letter you want.
The song which has same character you selected is displayed.
With VOL+ / VOL- knob, you can select the song you want.
Press enter SEL key, and then the song you selected will start.

SPE IFI ATIONS
GENERAL
Power Supply Voltage D 12 Volts (Negative Ground)
Max urrent onsumption 1A
Max Output Level +6dB
FM SE TION
Frequency range 87.5-108.0MHz
hannel step 50 KHz
Intermediate frequency 10.7MHz
Sensitivity 2uV
Signal to noise radio >60dB
MW SE TION
Frequency range 522-1620KHz
hannel step 9 KHz
Intermediate frequency 450KHz
Sensitivity 2uV
Signal to noise radio >50dB
D/MP3/WMA PLAYER SE TION
Signal to Noise Ratio >60dB
Frequency Response 20Hz-20KHz
AM is a registered trademark of AM Baltic www.amcpro.lt