AMC // AKUSTIK & AKUSTIK+
19
Akustik +
E.P. 300 10 kg 24003
E.P. 200 10 kg 24002
E.P. 100 10 kg 24001
Mount designed for vibration
damping of walls, equipped with
long ring-attached screws for
threading onto wooden or plastified
walls. Maximum load per damper
10 kg.
Mount designed for vibration
damping of walls, equipped with
flanges for fitting onto concrete.
Maximum load per damper 10 kg.
Mount designed for vibration
damping of walls, equipped with
flange and angle for fitting onto
concrete and threaded. Maximum
load per damper 10 kg.
This mount is designed to be screwed
to the profile, with the possibility of
choosing different distances thanks
to its 3 holes.The anchoring in to the
wall is made by 2 fixing flanges.
This damper is conceived to be fixed
between two elements through two
metal parts with “pre-drilled holes”.
The metal parts are easy to cut in
order to adapt better to each work.
This damper is conceived to be fixed
between two elements through
two metal parts with “pre-drilled
holes”. The metal parts are easy to
cut in order to adapt better to each
work. Following this idea we can
realise a great amount of variants in
order to adapt better to each work.
Please enquire us if you need a more
adapted system for your work.
REF. AMC LOAD CODE SUMMARY INSTALLATION
E.P. 650 10 kg 24009
E.P. 600 10 kg 24008
E.P. 400 10 kg 24004
WALL MOUNTS
AMC // AKUSTIK & AKUSTIK+
CONCRETE
THREADED BOLT ON
THE CONCRETE
THREADED BOLT ON
THE CONCRETE
FIxATION TO THE
PLASTERBOARD
BEAM
