Amcrest IP8M-T2499EW User manual

Amcrest IP8M-T2499EW / IP8M-T2499EB
8MP POE 4K Turret Camera
User Manual
Version 1.0.4
Revised April 5th, 2019

2
Contents
Welcome ..............................................................................................................................................................................................3
Important Security Warning.................................................................................................................................................................3
Important Safeguards and Warnings ...................................................................................................................................................3
1 Features and Specifications...............................................................................................................................................................4
1.1 Overview......................................................................................................................................................................................4
1.2 Features.......................................................................................................................................................................................4
2 Device Overview................................................................................................................................................................................5
3 Connection & Installation..................................................................................................................................................................5
3.1 Connection Guide........................................................................................................................................................................5
3.2 Installation Guide ........................................................................................................................................................................6
3.2 MicroSD Card Installation............................................................................................................................................................8
4 Camera Access Setup ........................................................................................................................................................................9
4.1 Default Username and Password ................................................................................................................................................9
4.2 How to Setup the Camera ...........................................................................................................................................................9
4.3 App Setup ....................................................................................................................................................................................9
4.4 Desktop Access Setup................................................................................................................................................................14
4.5 Amcrest Cloud Desktop Setup...................................................................................................................................................66
4.6 Web Access Setup (AmcrestView.com).....................................................................................................................................66
5 Operation and Interface..................................................................................................................................................................67
5.1. Live ...........................................................................................................................................................................................68
5.2 Playback.....................................................................................................................................................................................69
5.3. Cloud Storage ...........................................................................................................................................................................71
5.4 Setup..........................................................................................................................................................................................71
5.5 Alarm .......................................................................................................................................................................................107
5.6 Logout......................................................................................................................................................................................107
6. FAQs/Troubleshooting .................................................................................................................................................................108
Glossary of Terms.............................................................................................................................................................................109
FCC Statement..................................................................................................................................................................................111
IC Warning Statement......................................................................................................................................................................111
Appendix A: Toxic or Hazardous Materials or Elements ..................................................................................................................112

3
Welcome
Thank you for purchasing an Amcrest camera!
This user manual is designed to be a reference tool for the installation and operation of your camera.
Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting.
Many of the setup and installation sections below have corresponding videos on YouTube
To access the setup videos, please go to http://amcrest.com/videos
For access to the quick start guide and other support information, go to http://amcrest.com/support
To contact Amcrest support, please do one of the following:
Visit http://amcrest.com/contacts and use the email form.
Call Amcrest Support using one of the following numbers:
Toll Free: [phone]
International Callers (Outside of US): [phone]
USA: [phone]
Canada: 437-888-0177
UK: 203-769-2757
Email Amcrest Customer Support supp[email protected]
Important Security Warning
To keep your Amcrest camera secure and prevent unauthorized access, please make sure to follow the steps below:
•Always make sure that your camera has the latest firmware as listed on
www.amcrest.com/firmware
•Never use the default password for your camera. Always ensure that your password is at least
810 characters long and
contains a combination of lowercase characters, uppercase characters as well as numbers.
Important Safeguards and Warnings
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.
2．Transportation Security
Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage, and installation of the
device.
3．Installation
Handle the device with care. Keep the device right side up.
Do not apply power to the camera before completing installation.
Do not place objects on top of the camera.

4
4．Repair Professionals
All the examination and repair work should be done by qualified service engineers. We are not liable for any problems caused by
unauthorized modifications or user-attempted repair.
5．Environment
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive substances, etc.
This product should be transported, stored, and used only in the specified environments as stated above. Do not aim the camera
at a strong light source, as it may cause overexposure of the picture, and may affect the longevity of the camera’s sensors.
Ensure that the camera is in a well-ventilated area to prevent overheating.
6. Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt from the lens, use an air blower or a microfiber cloth.
7. Accessories
Be sure to use only the accessories recommended by manufacturer.
Before installation, please open the package and check to ensure that all the components are present. Contact the retailer that
you purchased from, or Amcrest directly if anything is broken or missing in the package.
1 Features and Specifications
1.1 Overview
Amcrest provides an excellent digital surveillance product that can be useful to a wide variety of users. The camera connects to
any router and uses an internet connection to allow the user to access all of its functionality from many internet connected
devices. It’s easy to use and can be set up in a relatively small amount of time. It has various functions such as recording, playback,
and monitoring functionality and it synchronizes audio and video by default.
This camera adopts a high-quality design to achieve high levels of reliability and security. It can be configured to work locally, as
well as on a network. This camera works using a POE connection and interfaces with most networks through the Ethernet port of
your router.
1.2 Features
This camera has the following features:
•Network Access
The camera connects to a wide variety of routers to connect to the internet. Once setup, the camera can be accessed remotely
from a wide variety of internet connected devices, including PCs, iPhones, iPads, Android tablets, and Android phones.
•Cloud Storage Functionality
The camera can record video and audio streams to the Amcrest Cloud service to enable long-term storage for recordings. Amcrest
Cloud also allows the user to easily find and download recorded video for playback from any internet connected PC or Mac
computer.
•Advanced Network Protocol Support
This camera is UPnP compatible, and includes functionality for use with PPPoE, DDNS, and other protocols to allow remote and
local connection with a large variety of network hardware.
Note: There may be slight differences in functionality due to the existence of different product series.

5
IMPORTANT: Due to specific hardware limitations within your camera it is important to note that these devices will not be able to
automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it is imperative to make sure to
mount the cameras properly and position them as efficiently as you can to the areas you wish to monitor. All positioning actions to
the camera will have to be performed manually.
2 Device Overview
The image below shows the structure of the camera:
The images below show the dimensions for the camera. The measurements are in millimeters
(mm):
To access the reset button and to adjust the camera angle, use a Torx/Hex wrench to open the camera assembly by removing the
3 screws.
For reference, a Torx/Hex screwdriver tip looks like this:
3 Connection & Installation
This section provides information about the connection and installation of your camera.
3.1 Connection Guide
The camera initially should be connected via the following method:

6
Once connected to a PC or mobile device you will be able to configure the device to your network. For more information.
3.2 Installation Guide
To install the camera on a ceiling or wall, please reference the below diagram as well as the steps:
Note: Prior to installation, please ensure that the installation environment can support at least 3x the weight of the camera and
bracket.
Figure2-1 (a)
Figure 2-2 (b)
Note: Due to specific hardware limitations within your camera it is important to note that these devices will not be able to
automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it is important to make sure to
mount the cameras properly and position them as efficiently as you can to the areas you wish to monitor. All positioning actions to
the camera will have to be performed manually.

7
To install the camera onto a wall, follow the steps below:
1. Please take out the installation position map in the accessories bag, and then stick it on the ceiling or the wall.
2. Drill bottom holes according to the installation position map and then insert three expansion bolts into the bottom holes. Secure
these three bolts firmly.
3. Disassemble the device
For the device shown in Figure2-1 (a), the steps of disassembling the device are as follows: Step 1 Press the button on the
pedestal to make it expand.
Step 2 Press the dome enclosure down the cable exit to separate the pedestal and the dome enclosure and disassemble the
device.
Figure 2-3
For the device shown in Figure 2-2 (b), loosen the locking screw, pull the enclosure downward,
and then disassemble the device.
4. Select run the wire through bottom or side and insert multi-function cable into exit hole on installation surface. Bottom wiring:
select to lead out the cable through ceiling or wall, which can protect the cable effectively.
Side wiring: Select to lead out the cable through side exit and add metal conduit, etc, which can prevent the cable from being
destroyed.
Figure 2-4
Figure 2-5

8
5. Adjust pedestal position, aim at bottom hole. Take out three ST4.2 self-tapping screws in accessories bag. Insert them into the
plastic expansion bolt bottom hole and fix the pedestal on installation surface.
6. Waterproof connector installation for network port; see Figure 2-6 for more details.
Figure 2-6
1. Keep the convex groove outward and install the rubber ring into the network port, keep the smaller hole of the rubber ring
outward and install the fixing rubber ring into the main body of the waterproof connector.
2. Pull the network cable without crystal head through main body of waterproof connector, fixing rubber ring and waterproof
locking cover, make the crystal head of network cable, and then insert it into the network cable.
3. Put the main body of waterproof connector on the network port and rotate it clockwise to lock the network port and
waterproof connector firmly.
Put the waterproof locking cover on the main body of waterproof connector and rotate it clockwise to lock the waterproof
connector and waterproof locking cover firmly.
3.2 MicroSD Card Installation
Before inserting a microSD card into your camera, please make sure the camera is unplugged from power. For weatherproof
reasons, the microSD card slot is located inside the camera body. This requires disassembly of the camera to access it. For more
information on how to access the microSD card slot, follow the instructions provided below.
Note: You will need a Phillips head screwdriver and the included star tool to complete the process.
For a detailed instructional video, visit: https://www.youtube.com/watch?v=E2SKIGZg5tE
1: Using the provided star tool, loosen the locking pin of the housing and remove the camera. Only 2 - 3 turns are needed as the
screw will come out if loosened all the way. Remove the housing from the base ring and slide the base ring down to remove the
camera.
2: Using a Phillips head screwdriver, remove the 3 screws on the back of the camera.
3: Using a smaller screwdriver, remove the 2 black screws holding the motherboard of the camera to the body of the camera.
4: The microSD card slot if located on the front of the motherboard as shown in the image below. Make sure not to touch the lens
of the camera to avoid smudges or dirt from impairing the lens. The microSD card slot if located on the front of the motherboard.
5: Open the clasp of the microSD card by carefully sliding the clasp forward.
6: Place a microSD card (no larger than 128GB) into the microSD card tray of the camera and align the gold pins of the clasp with
the pins of the card. Carefully place the clasp onto the microSD card and lightly push the clasp backward to secure the card to the
slot.
7: Place the motherboard back onto the body of the camera and secure the bracket onto the body of the camera.
8: Close the camera by aligning the two protruding screw openings on the back side with the two recessed counterbore holes on
the front side. Ensure the heat conductive pad makes contact with the metal body. Then insert and tighten the 3 screws onto the
back of the camera.
9: Run the cable of the camera through the base ring and place the camera body onto the base ring. Place the housing frame over
the camera body and against the base ring. Use the star tool to secure the housing back onto the base ring.
Note: When securing the base ring, do not turn the locking screw more than 2 –3 times. Too much pressure to the base may
result in the housing not securing properly to the base ring.

9
4 Camera Access Setup
This section of the guide will provide the user with information on how to setup access to the camera through any of the following
methods.
4.1 Default Username and Password
To login to the system for the first time, use one of the following default username/password combinations. Once you’ve
successfully logged in, it is highly recommended to change the password for security reasons.
Username: admin
Password: admin
Note: Logging in for the first time will prompt the user to change the password to the admin account.
4.2 How to Setup the Camera
To make your experience with your Amcrest camera easy and simple, we've provided multiple ways to set up, view, and operate
your camera depending on your needs. Please follow the instructions on this page to set up your camera in the way that works
best for you.
4.2.1 Setting up Your Camera for the First Time
If you are setting up your camera for the first time, or you are setting up your camera for mobile viewing, please follow the
instructions as outlined on section 4.3. Using the Amcrest Cloud app or Amcrest View app on your smartphone or tablet, you can
view your camera live from anywhere, and access features such as taking snapshots, creating recordings, and more.
4.2.1 For Configuring Advanced Settings on Your Camera
If you would like to configure your camera to enable advanced features such as motion direction, e-mail alerts, FTP, image
adjustments, scheduling and more, please follow the instructions as outlined on section 4.4 (Desktop Access).
4.2.3 For Cloud Storage and Playback
Amcrest Cloud is our optional cloud storage and playback service which allows you to access recorded footage from any device.
We offer 4 hours of free storage for your first camera. Please follow the instructions as outlined on section 4.5 (Cloud Access) to
sign up for our Amcrest Cloud service and get 4 hours of free storage.
4.2.4 For Quick Web Access to Your Cameras
AmcrestView.com is a web portal that allows you to view your cameras and recordings quickly and easily from anywhere in the
world using a web browser. Use AmcrestView.com if you need to simply check-in at a moment's notice. If you would like to use
AmcrestView.com, please follow the instructions outlined on section 4.6 (Web Access).
4.3 App Setup
Amcrest cameras can be used on your mobile device using the following apps:
•Amcrest Cloud
•Amcrest View Pro
Both apps are free and available in the App Store and Google Play store. Please note, each app requires an iOS 6.0 or later version.
Android will require a 3.0 or later version OS to run these apps.

10
For purposes of this guide, we will use iOS, though both apps. The App Interface may differ slightly from the screenshots below as
updates are released. Below, you'll find instructions on how to set up your camera up on the Amcrest cloud app as well as the
Amcrest View Pro app.
4.3.1. Amcrest Cloud App Setup
Amcrest Cloud allows you to access your device from anywhere in the world. Please note, you will need an Amcrest Cloud account
to proceed with Amcrest Cloud app setup. You can register for a cloud account in the Amcrest Cloud app or from the Amcrest
Cloud website at amcrestcloud.com
•Please make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to your
router.
•Make sure your camera and mobile device are on the same network during setup.
•To ensure the camera connects to the cloud, a reboot of your camera is recommended.
To add your camera onto the Amcrest Cloud app, follow these steps:
1. Download and open the Amcrest Cloud app from the App Store or Play Store.
Note: Connect your mobile device to the same network that your camera is on.
2. Register for an Amcrest Cloud account. To register click on Sign Up and fill out the form to complete registration.
3. Tap on Add Camera
4. Give your camera a name (Ex. Garage, Living Room,
Kitchen, etc.) and tap Next to continue.

11
5. Scan the QR code on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
6. If you are adding a new camera that does not have a
set password the app will automatically detect that a
new camera is being added. Tap OK to proceed.
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the Confirm Camera Password
section. Tap Next to continue.
8. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
For more information about the Amcrest Cloud app and its features, visit amcrest.com/support

12
4.3.2. Amcrest View Pro Setup
To add your PoE camera to the Amcrest View Pro app follow these steps:
•Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to your router.
•Make sure your camera and mobile device are on the same network during setup.
1. Download and open the Amcrest View Pro app from the App Store or Play Store.
2. Open the app and tap on the + symbol in the middle
of the screen to begin adding your PoE device.
3. Tap on Add Device to add a new device to your app.

13
4. Tap on PoE Camera
5. Next, select a connection type. Since we will be
setting up a basic P2P connection with the device, tap
on "P2P Connection" to continue.
6. Scan the QR code on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
7. Give the camera a name (e.g. Garage, Kitchen,
Living Room, etc.) and provide the username and
password for your camera. The default username and
will be admin. Tap Start Live View to continue.
Note: You can tap on the icon to verify the
password.
Note: Android users, tap on Scan QR Code to access the QR code reader.
8. The app will prompt you to change the password.
Enter a password between 8 and 32 characters and
confirm the password. Press OK to continue.
9. Your camera is now set up and ready for use on the
Amcrest View Pro app. For more information about
Amcrest View Pro and its functionalities visit
amcrest.com/support
For more information about Amcrest View Pro and its functionalities visit amcrest.com/support

14
4.4 Desktop Access Setup
NPAPI plugins have been recently depreciated by most mainstream web browsers such as Google Chrome, Outlook, and Firefox.
Amcrest is pushing forward to create new and diverse ways for you to more easily access your devices from anywhere at any time.
This document was created to provide a general overview and understanding on how to best access your device from your
computer.
Amcrest Surveillance Pro
Amcrest Surveillance Pro is an abbreviation for Professional Surveillance System. This software the most stable and recommended
method of accessing your devices from your computer. It is a free software provided by Amcrest that can provide a means of
accessing all your devices in one central location without the use of a plugin or web browser.
Note: Mac users, Amcrest Surveillance Pro currently functions as a 32-bit platform and may not be compatible with certain 64-bit
Mac operating systems.
Installation
To install the Amcrest Surveillance Pro software on your computer, please visit amcrest.com/downloads In the All Downloads
page you will notice separate sections for Mac OS and PC/Windows downloads for the free Amcrest Surveillance Pro software.
Click on the option that applies to your computer’s operating system to begin installing the software.
To install the software, double click the Amcrest_Surveillance_Pro_Setup.exe to begin the installation.
Click Next to continue. Please read the End-User License Agreement (“EULA”) carefully and click the Accept radio button when
finished to agree. Once accepted, click the Next button to continue.

15
Select the functions that you want to install with the software. You can choose to bundle the PC-NVR function with the software.
PC-NVR turns your computer into an NVR and will utilize your hard drive (HDD) on your PC to store and access recorded video. To
proceed with the installation, click Next.
Select the destination folder in which you would like recorded files to be retained. To choose a folder, click on the Browse button
and select the folder. Once a folder has been selected, click the Install button to begin installing the software on your computer.

16
Once the software has finished installing you will see a few options. You will have the options to view the release note and run the
Amcrest Surveillance Pro software. To view the release notes after pressing Finish select the Release note checkbox. To begin
running the software directly after pressing finish, select the Run Amcrest Surveillance Pro checkbox. When complete, click the
Finish button to proceed.
Setting a Password
After the installation of the Amcrest Surveillance Pro software you will need to set an administrator password. This password will
be set password for the admin account on the software. When a valid password has been entered, confirm the password in the
Confirm Password field and click OK to continue.

17
Type the created password into the Password field on the next screen and click Login to log into the software. If you do not wish
to have to retype your password every time you log into the system, click on the Remember Password checkbox. If you wish to
exit the software, click Exit.
Main Interface Overview
When you first log into the software you will be taken to the main interface of the software.
Below is a description of the items listed in this menu.

18
Menu
In this section you can view the home page icons and any currently open functions in the
software. Click the Add button to add a function icon to the top pane.
Settings Menu
This menu allows you to Search, Add, Delete, or Import, and Export settings of devices
connected to your network.
All Devices
This menu allows you to view all added devices associated with the software.
Adding Devices into Amcrest Surveillance Pro
To provide the highest efficiency and security when adding a device into the Amcrest Surveillance Pro software it is highly
recommended to add the device using a direct IP address as opposed to using a P2P connection. Using a direct IP provides a direct
connection to your device without the use of utilizing a P2P server.
Direct IP Connection
To begin adding a camera, you will need the IP address of the device. To obtain the IP address for your device, it is recommended
to download the Amcrest IP Config tool. To get the Amcrest IP Config tool, go to amcrest.com/downloads and click on the IP Config
software link for either PC/Windows or Mac OS. Launch the IP Config tool and locate the IP address for your device. The IP address
will be listed in the IP field of the software.
After locating the IP address in the Amcrest IP Config tool for the device, return to the Amcrest Surveillance Pro software and click
on the Add button.
In the add menu, enter a name you would like to assign to your device. In this example, we are using “Front Door Camera”. Next,
in the Method to add menu, use the default setting “IP/Domain”, then enter the IP address and port number of the device being
added. As a reminder, the IP and port number of the device can be located in the IP Config software. The group name will then be
applied as Default Group, then enter the user name and password for your device. If this is the first time using your device, the
default username and password will be admin. Click the Save and Continue or Add buttons to proceed.

19
Once the device has been properly added the added device will appear in the Device menu.
If the device is properly connected in the software, you will notice a icon in the Online Status field. If the device is not
connected properly, click on the online status will be red. To modify settings for your device, click on the icon located in the
Operation menu. This menu allows to rename the camera as well as change the port number, username, and password. To update
the password, remove the default password and type the new password in this field. When done, click on Save to save the
information for the device.
Setting a Device to a Static IP
For security purposes it is highly recommended to set the camera to a static IP address. Setting your device to a static IP will
ensure the stability and the efficiency of your device while operating it in the Amcrest Surveillance Pro software. To set your
device to a static IP, click on the Home Page icon and navigate to the Device Config menu.

20
In the Organizations menu on the far left, click on the device you wish to modify. Then In the device configuration menu, under
General click on the Network icon to access the network settings for your device.
In the Network Settings menu, in the Mode section click on the Static radio button to set your device to a static IP. Click Save and
Apply to apply the network settings to your device.