American DJ Octo Beam User manual

American DJRUserUser
Instructions
24-004-0406
Rev 1.0
OCTOOCTO
BEAMtm
WARNING: Never Look Directly INTO Laser Beam.
CAUTION: Use of controls, adjustments, or procedures
other than those specified herein may result in hazardous
radiation exposure.
Caution! No user serviceable parts inside do not attempt repairs. In the event your unit should fail,
contact your dealer.
WARNING! This Product must be earthed. Risk of shock hazard, disconnect power before opening.
To prevent fire or shock hazard, do not expose this product to a high temperature or high humidity area.
American DJ R
This product is a chase controller of 8 movable red laser diode, which allows you to control the
chase patterns, speed, motor movement and laser beam. This product has 9 built-in chase
patterns and 8 adjustable speeds, any of the 9 patterns can be operated in Audio/Chase mode.
The motor movement can be operated in Music/ Auto mode. Also, the laser beam can chase
or be full on.
This laser product is great for mobile DJ's, small clubs. Karaoke, home use, or special effects
occasions.
OCTO BEAMTM
Music/Auto motor movement
Sensitivity control
8 movable laser diodes
9 built-in chase patterns
8 adjustable speeds
Auto Chase
Audio Chase
Full on
Technical Specifications:
Power Input ............................................................................................ AC 120V~60Hz, 1A max.
Diode Power ...................................................................................................................... < 5mW
Wavelength ............................................................................................................ 630nm-680nm
Fuse ................................................................................................................ F1A 250V 5x20mm
Dimensions ..................................................................... 282x282x154mm (bracket not included)
Weight ............................................................................................................................... 5.25Kgs

Audio
Sensitivity
min max
OCTOOCTO
BEAMtm American DJR
Operating Instructions:
1. Please confirm power input is matched with that specified on this unit.
2. Plug in power cord and turn the power on.
3. Function modes can be selected using Dip switches 1-10.
1098
1098
1098
1098
1098
1098
1098
1098
Speed-1 Slow
Speed-2
Speed-3
Speed-4
Speed-5
Speed-6
Speed-7
Speed-8 Fast
Switches Function
(8~10)
on
Pattern-1
Pattern-2
Pattern-3
Pattern-4
Pattern-5
Pattern-6
Pattern-7
Pattern-8
Switches Function
(5~7)
on
765
765
765
765
765
765
765
765
Auto
Music
Chase
Full on
Audio
Chase
Manual
Auto
Function
Switches
(1~4)
Motor
Laser
Beam
Music
Chase
4321
4321
4321
4321
4321
4321
4321
4321
Operation ON
10987654321
Motor movement Set dip switch 1 to "ON", the motor will operate depending on the
Music beat detected by the microphone.
Set dip switch 1 to "OFF", the motor will operate automatically.
Laser beam Set dip switch 2 to "ON", 8 laser beams will be in "Full on" mode,
Set dip switch 2 to "OFF", the laser beams will run the chase of
patterns.
Music mode Set dip switch 3 to "ON", the chase patterns will be executed by
The music beat detected by the microphone.
set dip switch 3 to "OFF", the patterns will chase at the speed
you've selected.
Chase mode Set dip switch 4 to "ON", all the 8 patterns will chase in sequence
Continuously.
Set dip switch 4 to "OFF", you can select desired pattern from the
8 patterns using dip switches 5,6 and 7. (See the table.)
Speed mode The chase speed can be controlled by the dip switches 8.9 and
10. (see the table.)
4. The audio sensitivity can be controlled by the Sensitivity knob.