
digital slideshow card
www.photoworks.com | Customer Service: 1-800-746-8696 3
2. CHARGING YOUR CARD
Beforeyou’llbeabletoprepareandsendyourcard,you’llneedtochargeit.Thiswilltakeabout2
hours.Tocharge,you’llneedyourcardandtheUSBportonyourcomputer.
Followthesestepstochargeyourcard:
1.Turnonyourcomputer.
2.Locatethebuilt-inUSBatthebottomrightcornerofyourcard.
3.UseslidetriggertoexposeUSBandpullgentlytoextend1”cord.
4.ConnectUSBtoUSBportonyourcomputer.
5.Abatteryiconappearsintoprightcornerofcardscreenasitcharges(allow2hourstofullycharge)
6.DisconnectUSBfromcomputerandgentlypushbackintocard.
Whilethecardischarging,you’llseeabatterysymbolappearintheupperrightcornerofthescreen.
Yourcardwillbechargedin2hours;therewillbenootherindicationwhenyourcardisfullycharged.
If your card does not turn on when you open it, the battery may be completely drained. Make
sure to charge it for the full two hours.
3. ADDING YOUR PHOTOS TO YOUR CARD
Inordertoaddphotostoyourcard,makesureit’sconnectedtoyourcomputer.Toconnectit,locate
thebuilt-inUSBatthebottomrightcornerofyourcard.UsetheslidetriggertoexposeUSBandpull
gentlytoextend1”cord.ConnectUSBtoUSBportonyourcomputer.Thenopenthecard.
Yourcomputershoulddetectthecardonceit’sconnected;itmaygiveyouamessagetellingyou
it has found new hardware.
Dependingonyourcomputersettings,thecardsoftwaremayopenautomatically,oryourcomputer
mayaskyouforpermissionbeforeopeningthecardsoftware.Ifneitherofthesethingshappens,you
will have to run the card software yourself.
If you have trouble opening or running the software, please call Photoworks at 1-800-746-8696.
We’ll be happy to help.
TomanuallyrunthesoftwareusingaWindowscomputeropen“MyComputer”andclickonPWCard.
Ifyou’reusingaMacintosh,openthePWCardavailableonyourdesktop.