American Innovative, Neverlate Executive NL7DEX-US User manual

Neverlate ExecutiveTM Alarm Clock
Model No. NL7DEX-US, Instructions for Use
Product Registration
Please visit American Innovative on the web at www.americaninnovative.com/register/
to register your new purchase.
Neverlate
TM
Executive Alarm Clock
Executive Alarm ClockExecutive Alarm Clock
Executive Alarm Clock

Page 3
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
IMPORTANT SAFEGUARDS,
PLEASE READ FIRST!
CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER-SERVICEABLE PARTS
INSIDE. PLEASE REFER ANY SERVICING TO
QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT: RISQUE DE CHOC
ÉLECTRIQUE – NE PAS OUVRIR
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
SAFETY CERTIFICATIONS
This product, the Neverlate Executive™ Alarm Clock, model
NL7DEX-US, is listed by CSA International as certified.

Page 4
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
IMPORTANT SAFETY INSTRUCTIONS
For your protection, please read these safety instructions completely before operating this
product. All operating and use instructions should be followed. All warnings printed on the
device and in the operating instructions should be adhered to. Please keep this manual for
future reference.
Water & Moisture
Do not use this device near water. For example, do not use this device near a bathtub, wash
bowl, kitchen sink or laundry tub. Do not use this device in a wet basement, near a swimming
pool or near any other source of water. Do not place water-filled vessels on this device.
Heat & Open Flame
Do not place this device near any heat sources such as radiators, stoves, amplifiers or other
devices that produce heat. Do not place an open flame on or near this device.
Ventilation
The openings in the cabinet of this device are designed to provide necessary ventilation for
the product’s internal components and to protect it from overheating. Ensure that these
openings remain free of obstructions. Do not situate this device on a bed, sofa, rug, or similar
surface that may block ventilation openings. This product should not be placed in a built-in
installation, such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Power Source
This product should be connected to a power supply only of the type marked on the outside
of the unit. If you are not sure of the type of power supply to your home, please consult your
product dealer or local power company. Where the main plug is used as the disconnect
device, the disconnect device shall remain readily operable. Please refer to the operating
instructions regarding use and replacement of the backup battery.
Grounding or Polarization
Precaution should be taken not to defeat the safety purpose of grounding or polarization.
This product is equipped with a polarized AC power cord plug (one blade is wider than the
other). This plug is designed to fit into the power outlet in only one way. If you are unable to
fully insert the plug into the power outlet, try reversing it. If the plug should still fail to fit, use
a different outlet or contact a certified electrician to have a suitable outlet installed.
Overloading
Do not overload wall outlets, extension cords, etc. beyond their rated capacity.
When Not In Use
Unplug the unit from the wall when not using for prolonged periods of time. When removing
the power cord from the wall, always grasp the plug; do not pull the cord itself.

Page 5
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
Power Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by items
placed on or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Lightning
If the unit is not plugged into an appropriately rated surge protector, unplug the unit from the
wall in the event of a lightning storm in order to protect it from powerline surges. Unplug the
unit if it is to be unused for a long period of time.
Object & Liquid Entry
Never insert objects of any kind into this product, through ventilation openings, as these
objects may touch dangerous voltage points or create a short circuit that could result in a fire
or electric shock. Never spill liquid of any kind on or into the device.
Cleaning
Unplug the unit from the wall before cleaning. Use a soft, damp cloth to wipe down the unit.
Do not use liquid, aerosol or abrasive cleaners.
Servicing & Safety Checks
Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. All servicing should be referred to qualified personnel.
Servicing is required when the unit does not operate properly or has been damaged in any
way, including but not limited to power supply/cord damage, damage as a result of exposure
to moisture, and damage resulting from impact. Upon completion of any service or repairs to
this product, ask the service technician to perform routine safety checks.
Damage Requiring Service
This product should be fixed by qualified service personnel under the following conditions:
1. When the power supply, cord or plug has been damaged.
2. If liquid has been spilled, or objects have fallen into the unit.
3. If the unit is exposed to rain or water.
4. If the product does not operate normally when following the operating instructions.
5. If the unit has been dropped or damaged in any way.
6. When the product exhibits a distinct change in performance.
Replacement Parts
In the event that replacement parts are required, ensure that the service technician uses parts
specified by the manufacturer or those deemed to be equivalent. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.

Page 6
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
FCC INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to the equipment that are not expressly approved by
the responsible party for compliance could void the user’s authority to operate the equipment.
ABOUT AMERICAN INNOVATIVE™
American Innovative™ was founded to pursue the development of innovative new products
that should exist, but don't. “Products that make sense™” is our motto and the execution of
this philosophy can be seen throughout the company's product line. Careful attention to the
needs of the user and a keen eye for industrial design and user interface engineering are the
secrets of American Innovative™'s success. To learn more about American Innovative™
please visit us on the web at www.americaninnovative.com.
SERVICE CONTACT INFORMATION
Please check http://www.americaninnovative.com/service/ for the most up-to-date contact
information and for details regarding product servicing and/or warranty claims.
American Innovative, LLC
attn: Warranty Service
364 Boylston Street, 3rd Floor
Boston, MA 02116
United States of America
p. 617.395.7831 or 866.663.2393 (in the USA)
f. 866.515.7511
e. [e-mail]

Page 7
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
Contents
Setup ............................................................................................................................................9
Setting the Time & Date ..........................................................................................................................................9
Battery Backup .........................................................................................................................................................9
Using the Radio and Station Presets ..........................................................................................10
Basic Operation......................................................................................................................................................10
Storing Station Presets...........................................................................................................................................10
Recalling Station Presets........................................................................................................................................10
Understanding the Neverlate’s Alarm Features .........................................................................11
Daily Alarm Bank ....................................................................................................................................................11
7-day Alarm Banks..................................................................................................................................................11
Which Alarm Bank(s) Should I (or We) Use? ..........................................................................................................11
Setting Alarms............................................................................................................................12
Customizing the Wake Buzzer Ringtone or Station Preset ...................................................................................12
Setting the Alarm Wake Volume............................................................................................................................12
Using the Nap and Sleep Timers................................................................................................13
Using the Nap Timer ..............................................................................................................................................13
Using the Sleep Timer ............................................................................................................................................13
Setting User Preferences............................................................................................................14
Advanced Features.....................................................................................................................15
Alarm Skip ..............................................................................................................................................................15
Other Advanced Features......................................................................................................................................15
Using Inputs & Outputs..............................................................................................................16
Auxiliary (AUX) Input ..............................................................................................................................................16
Headphone (Line-Out) Output...............................................................................................................................16
Powered USB Port (No Data) .................................................................................................................................16
Other Products from American Innovative.................................................................................17
Alarm Clocks & Clock Radios.................................................................................................................................17
Travel & Public Speaking........................................................................................................................................17
Chef’s Products ......................................................................................................................................................17

Page 8
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.

Page 9
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
Setup
Setting the Time & Date
The first time you plug in your Neverlate, use the Setup
Sequence to input the current time and date:
1. Press and hold the SETUP key for two (2) seconds to
initiate the Setup Sequence.
2. Twist the VALUE collar or use the SEEK | SCAN +/- keys
to adjust the value of each parameter.
3. Press the SETUP key between steps and to complete the
procedure.
Step Name Description
T-FORM Time Format (12/24 HR)
Select 12- or 24-hour clock format.
TIME Current Time
Enter the current time. Note: The SRC | SAVE key may
be used to toggle between AM and PM.
D-FORM Date Format (MM.DD or DD.MM)
Select Month.Day or Day.Month date format.
MONTH Month (1 – 12)
Enter the numeric month.
DAY Day (1 – 31)
Enter the day.
YEAR Year (2000 – 2099)
Enter the year.
Battery Backup
Your Neverlate uses one CR2032 button cell battery to retain its
memory. Install the battery with the positive side ( + ) facing
out. In the event of a power outage the LCD display is not
illuminated but the time, alarm settings and other preferences
will be retained until the power is restored.
WARNING: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
TIP: The STATION PRESET
PREV/NEXT keys may be
used to step back and forth
between steps.
TIP: Exit the Setup
Sequence at any time by
pressing the
ON | OFF key.
TIP: The Setup Sequence
exits automatically after
sixty (60) seconds of
inactivity.
TIP: This feature is also
convenient should you wish
to relocate your Neverlate
from one room to another.

Page 10
Printed in China.
Patent Pending.
© 2003-2007 American Innovative, LLC.
Using the Radio and Station Presets
The Neverlate Executive contains a high-quality FM/AM digital
tuner and can store up to twenty (20) station presets.
Basic Operation
Turn the radio on or off using the ON | OFF key. Note that the
radio cannot be toggled on or off while the MODE knob is in
any of the alarm set positions.
Use the SRC | SAVE key to cycle the audio source between FM,
AM and AUX (See Using Inputs & Outputs on page 16 for more
information on using the auxiliary audio input).
Use the VOLUME +/- keys to adjust the digital volume control.
Use the SEEK | SCAN +/- keys to adjust the radio frequency.
Press and hold these keys for one (1) second to scan to the next
strong station automatically.
Storing Station Presets
Your Neverlate can store up to 20 station presets. To store a
station preset:
1. Locate the station you would like to store.
2. Press and hold the SRC | SAVE key for two (2) seconds.
The next available station preset location flashes in the
display.
3. If desired, change the preset location using the STATION
PRESET PREV/NEXT keys.
4. Press the SRC | SAVE key to lock in the new station
preset. The station preset location stops flashing.
NOTE: If the location selected has been stored previously, it will
be overwritten.
Recalling Station Presets
Use the STATION PRESET PREV/NEXT keys to step through the
presets that you have already stored. Empty station preset
locations are not recalled.
TIP: The FM antenna is
integrated into the
power cord. If you are
having trouble
receiving FM
broadcasts, try
reorienting the position
of the cord.
TIP: The radio volume is
independent of the
alarm wake volume.
See Setting the Alarm
Wake Volume on page
12.
TIP: The Neverlate does
not utilize the concept
of an “AM Bank” or
“FM Bank” of presets.
Any station from either
band can be stored in
any preset location.
TIP: To remove a
station preset from a
previously stored
location, press and hold
the SNOOZE key for
two (2) seconds while
that station preset is
displayed.