SVINZ SCC009 User manual
USER MANUAL
V06.07
Charging Alarm Clock SCC009
Thank you for your purchase of this SVINZ product. Please read this instruction manual
carefully before using product to ensure proper use. Keep this manual in a safe place for
future reference.
NEED HELP?
Please contact a SVINZ®customer support representative first regarding any additional
information on product features, specifications or assistance with setup.
WARNING:
To reduce the risk of fire or electric shock, do not expose the appliance to rain or moisture.
To prevent electric shock, do not use this plug with an extension cord receptacle or other
outlet unless the blades can be fully inserted to prevent blade exposures.
To prevent fire or shock hazard, do not install this product in a confined space such as a book
case or similar unit.
To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts
inside, refer to qualified user personnel.
CAUTION:
1. Read these instructions
2. Keep these instructions
3. Read all warnings
4. Follow all instructions
5. Do not use this product near water
6. Clean only with a dry cloth
7. Do not block any ventilation openings
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that product heat
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus
10.Only use attachments/accessories specified by the manufacturer
11.Unplug this apparatus during lightning storms or when unused for long periods of time
12. Apparatus shall not be exposed to dripping or splashing, and that not objects filled with
liquids, such as vases, shall be placed on the apparatus
13.The batteries shall not be exposed to excessive heat such as sunshine, fire or the like
14.The product shall be connected to a mains socket outlet with a protective earthing
connection
15.The ventilation should not be impeded by covering the ventilation openings with items
such as newspaper, curtains etc
16.No naked flame sources such as lighted candles should be placed on the product
17.Unwind and straighten the power cord before use
18.Damage requiring service : unplug the power cord and refer servicing to qualified service
professional under the following conditions :
A. If liquid has been spilled on or into the product
B. If the product has been exposed to rain, water or other liquids
C. If the product does not operate normally by following the operating instructions, adjust
only those controls that are covered by the operating instructions.
D. If the product has been dropped or damaged in any way
E. When the product exhibits a distinct change in performance. This may indicate a need
for service.
19.Servicing: Do not attempt to service this product yourself as opening or removing covers
many expose you to dangerous voltages or other hazards. Refer all servicing to a qualified
service professional
20.Safety check: Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition
WHAT’S INCLUDED:
·Charging alarm clock
·Instruction manual
·Power adaptor
KEY FEATURES:
·Dimmable large LCD display
·Dual USB charging port ( output 5V 2.1amp + 5V 1.0amp )
·Snooze function ( 5 times )
·Indoor thermometer
·Chord music alarm
·Rotating Button for easy setting
·Dual alarm
·Adjustable volume control
PRODUCT INFORMATION
○
1Rotating Button
○
2Alarm Button 1
○
3Alarm Button 2
○
4○
5USB Charging Port
○
6DC-IN Jack
○
7Time Setting Switch
○
8Temperature C/F Switch
○
9Temperature Sensor
○
10 12H/24H Switch Button
○
11 Volume Control Wheel
○
12 Battery Compartment Panel
OPERATING INSTRUCTIONS
INTALLING THE BATTERIES
Remove the battery compartment panel ○
12 , install 3 AAA batteries according to the image
inside the battery compartment properly, close and secure the battery compartment.
CONNECTING POWER
Connect the power cord to the DC-IN jack on the bottom of the unit, and then plug the power
cord onto wall outlet.
SETTING THE TIME
Switch the Time Setting Switch ○
7to the SET mode, the number on the display starts to flash,
softly spin the Rotating Button ○
1clockwise or counterclockwise to set time. When the
correct time is set, switch the Time Setting Switch ○
7to the LOCK mode, and the display will
stop flashing and the time is saved.
SETTING ALARM 1& ALARM 2
Press down the Alarm Button 1 ○
2, the alarm 1 icon and number will light up and flash. Spin
the Rotating Button ○
1clockwise or counterclockwise to set the desired alarm time. When
the alarm time is set, the alarm 1 icon and time will flash about 5 seconds then the desired
alarm time will be saved automatically. Repeat the same settings for setting alarm 2.
SNOOZE FUNCTION
When alarm is sounding, press the Rotating Button ○
1once to stop alarm for 9 minutes and
then resume. Pressing and holding the Rotating Button ○
1about 3 seconds will cancel the
snooze function in snooze mode. Snooze function will also stop automatically after 30 minutes
if there is no operation.
ALARM DURATION
The alarm will sound for 30 minutes if no key is pressed, then it will stop automatically and
resume at the same alarm time on next day. To stop Alarm 1 and/or Alarm 2 when sounding,
press the Alarm Button 1 ○
2or Alarm Button 2 ○
3to raise then the alarm icon and time will
not be displayed; or press the Rotating Button ○
1once to be in snooze mode then press and
hold the Rotating Button ○
1about 3 seconds to stop alarm.
12H/24H SWITCH
Use the 12H/24H Switch Button ○
10 on the back of the unit to select 12 hour or 24 hour time
mode
THERMOMETHER DISPLAY
Use the Thermometer C/F Switch ○
8to switch between Celsius or Fahrenheit display
ADJUSTING LCD BRIGHTENSS
There are four dimming opons available HIGH/MEDIUM/LOW/FAINTNESS. Press the Rotang
Buon ○
1to toggle between the four brightness sengs.
USB CHARGING FUNCTION
This alarm clock is equipped with 2 convenient & fast USB charging ports on the top that
allows you to recharge many brands of smart phone, tablet and portable music player. To
charge your device, connect the USB charging cable that is connected to your handheld device
to the USB charging ports ○
4○
5on the top of this alarm clock.
ADJUSTING VOLUME
Use the Volume Control Wheel ○
11 to adjust the alarm sound from minimum to maximum.
BATTERY BACKUP
This alarm clock is equipped with a baery backup feature. This feature will restore your alarm
clock sengs in the event of a power outage. Branded new long life AAA baeries are
recommended.
SPECIFICATIONS
Display Size: 3.2”
Display Type: LCD
Baery Required: 3 x AAA
USB Charging: 3000mA Total
Speaker Size: 1”, 1.0W
Power Input: 100-240V 50-60 Hz
Input: DC5V = 3.0A
CLARE AND MAINTENANCE
1. Disconnect the unit from any power sources before cleaning
2. Keep the unit away from magnec objects, water or heat sources
3. Clean only with a dry cloth
WARRANTY
Thank you for choosing SVINZ. We guarantee your investment in our product is a solid one.
Extensive thought, research, planning and design goes into every product we make. High
quality components combined with precision manufacturing allows us to maintain the highest
possible production standards. All items are guaranteed against defects in materials and
craftsmanship.
SVINZ products come with a complete one-year parts and labor warranty. This warranty is
non-transferable and proof of purchase required when seeking warranty assistance. SVINZ has
outstanding quality control. If something should go wrong with any of our products, we will
repair it free of charge. If the product cannot be repaired, we will replace the product. If the
product has been discontinued, we will replace the product with either the newest version of
said product or current equivalent.
This warranty shall not apply to:
1. Any defects caused or repairs required as a result of abusive operation, negligence,
accident, improper installation or inappropriate as outlined in the owner’s manual
2. Any SVINZ product tampered with, modified, adjusted or repaired by any party other than
SVINZ
3. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal
wear and tear
4. Any damage caused by external or environmental conditions, including but not limited to
transmission line/power line voltage or liquid spillage
5. Any products used for rental or commercial purposes
6. Any installation, setup and /or programming charges
If any situation your purchase displays a manufacturer’s defect during the warranty period and
Table of contents
Other SVINZ Alarm Clock manuals
