American Legend AUSTIN AL1100F User manual

© stropSedalacsE1202 9272-699-888-1llaCecivreSremotsuCroF
1
All Rights Reserved.
1-888-996-2729
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Your Model Number ______
________ _____
have your model number when inquiring about parts.
[email protected]
Please
Date Code ___________________________
2 - AL1100F- - SY
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Purchase Date ________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
AL1100W/F
Mailing Address: (Correspondence Only)
Escalade Sports
PO Box 889
Evansville, Indiana 47706-0889
Physical Location:
Escalade Sports
817 Maxwell Ave.
Evansville, Indiana 47711

Make sure you understand the following tips before you begin to assemble your game table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
Assembly Tips
Tools Required:
Socket Head Wrench (Included)
Furniture Polish and Soft Cotton Cloth
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
2
All Rights Reserved.
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE REQUIRED TO ASSEMBLE THIS GAME TABLE.
ATTENTION:
TWO ADULTS ARE REQUIRED TO ASSEMBLE
AUSTIN 72" AIR HOCKEY TABLE
Featuring: LED Light Strip

P3 - Right Leg
P4 - Left Leg
（
PARTS IDENTIFIER
(Not to Scale)
HARDWARE IDENTIFIER
(To Scale)
H1 - 8mm x 55mm
Hex Head Bolt
(12 pcs)
H5 - 8mm x 40mm
Hex Head Bolt
(12 pcs)
End Leg Apron
End Block
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.

P9 - Triangle Leg Support Blocks
(8 PCS)
ACCESSORIES IDENTIFIER
(Not to Scale)
A3
(2 pcs)(1 pc)(2 pcs) (2 pcs)
Top Panel of Lower
Center Support Beam
Side Panel of Lower
Center Support Beam
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
A4 - Felt Pad
A5 - A/C Adapter
A1 - LED Striker A2 - LED Puck

PARTS REQUIRED
12pcs - H1 Hex Head Bolt
12pcs - H2 Flat Washer
12pcs - H3 Lock Washer
2pcs - P3 Right Leg
2pcs - P4 Left Leg
8pcs - P9 Triangle Leg Support Blocks
1pc - P1 Main Cabinet
PARTS REQUIRED
8pcs - H5 Hex Head Bolt
8pcs -
H2 Flat Washer 8pcs -
H3 Lock Washer
2pcs - P2 End Leg Apron
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
STEP 1
Attach the P3 Right Legs, P4 Left Legs, P9 Triangle
Leg Support Blocks onto the P1 Main Cabinet using
the H1 Hex Head Bolts,H2 Flat Washers and H3
Lock Washers as shown in FIGURE 1.
Do not tighten H1 Bolts at this time.
STEP 2
Attach the P2 End Leg Aprons onto the P3/P4
Legs using the H5 Hex Head Bolts,H2 Flat
Washers and H3 Lock Washers as shown in
FIGURE 2.
Do not tighten H5 Bolts at this time.
P2
P2
P4
P3
H3
H2
H5
FIGURE 2
P4
P3
P3
P1
H3
H2
H1
H1
H3H2
H3
H2
H1
P4
P9
P9
FIGURE 1
Cabinet Frame
Support Beam
H1
P3/P4
Place inside of cabinet frame support beam
H3 H2
P9
P9
Cabinet Frame
Support Beam
Place outside
of frame
NOTE: Please study
closely for correct
assembly.

PARTS REQUIRED
4pcs - H5 Hex Head Bolt
4pcs - H2 Flat Washer
4pcs - H3 Lock Washer
4pcs - P5 Leg Leveler
PARTS REQUIRED
14pcs - H4 Phillips Flat Head Screw
2pcs - P8
1pc - P7 Top Panel of Lower Center Support Beam 2pcs - P6 End Block
Side Panel of Lower Center Support Beam
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
STEP 3
Attach the P7 Top Panel and P6 End Blocks
onto the P8 Side Panels using the pilot holes
and H4 Phillips Flat Head Screws as shown
in FIGURE 3.
STEP 4
Attach the STEP 3 Center Support Beam Assembly
onto the P2 Leg Aprons using the H5 Hex Head
Bolts,H2 Flat Washers and H3 Lock Washers as
shown in FIGURE 4.
DO NOT strip out H4 screws.
H4
H4
P6
P7
P8
P8
P6
FIGURE 3
P5
H5
H2
H3
FIGURE 4
Pilot Holes
Black laminate to outside.
P2
P2
Tighten all H5 Bolts from STEP 2 & 4
using T1 Socket Head Wrench at this
time--- DO NOT overtighten.
Thread P5 Leg levelers into legs
as shown in FIGURE 4.
NOTE: Need another
adult to hold the Support
Beam during assembly.

THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
Replacement of LED Light Strip
STEP TWO :
If the LED Light Strip needed to be replaced on the P1 Cabinet inner side, take the C1/C2 LED Light Strip out of
the table.
C1/C2
STEP ONE :
Should the LED lights not be working in the rail - Firstly , make sure the wall outlet cord is plugged in to a live A/C
outlet properly. Secondly , make sure the A/C Adapter
(A4) is tightly plugged in to its outlet under the table .
Lastly, make sure all LED Rail light connections are snuggly plugged into the Control Box
(C3) . At this point, if
the LED Rail Lights still not be working , please disconnect the A/C power to the table before proceeding .
A call will be required to our Customer Service Department to acquire the necessary replacement part(s).

ELECTRONIC CONNECTIONS
NOTE:
ON/OFF switch is attached to the air
fan motor cord. Be sure to always turn
fan motor off when play is completed.
IMPORTANT:
Plug into wall outlet.
Do not allow cord to be a trip hazard.
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
C7. Scorer
C6. Blower with A/C Cord
C3. Control Box
A5. Adapter
C4. Sensor with
Short Wire
C1. LED Rail with
Long Wire
C2. LED Rail with
Short Wire
C5.Sensor with
Long Wire
C3
A5
C7
C4
C5
To connect the C1/C2

© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
LED SCORING OPERATING
LED RAIL

© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
All Rights Reserved.
10
LED PUCK BATTERY CHANGE INSTRUCTION
STEP ONE:
Remove screws and back
cap from LED Puck using Small
Phillips Screwdriver (not provided).
STEP TWO:
Remove CR2016 Lithium
Battery 3V from LED Puck.
STEP THREE:
Insert new CR2016 Lithium Battery 3V
into LED Puck.
STEP FOUR:
Install back cap and secure screws with Phillps Screwdriver
(not provided).
Positive “+”
on bottom
side
LED STRIKER BATTERY INSTALLATION/REPLACE INSTRUCTION
NOTE:
Make sure the on/off
switch on the back
cap properly aligns
and fits into its slot in
the LED puck during
reassembly
IF BATTERY HOLDER BRACKET
MOVES, RE-INSTALL IT TO LED
PUCK AS SHOWN IN DIAGRAM.
Helpful Hint:
The LED puck battery will last approximately 7 hours of continuous play. The puck battery is not
rechargeable. Be sure to turn the switch to the “OFF” position when not in use to conserve your
battery life.
Helpful Hint:
Be sure to turn the switch to the “OFF” position when not in use.
AAA
+
+
AAA
(Batteries not included).
Make sure polarity is correct.
See” FIRST TIME BATTERY INSTALLATION AND NOTICE “ , before installing batteries, located on page 13.

CARE AND USE OF YOUR TABLE
1. Use spray furniture polish to clean all exterior surfaces of your table and on the
2.
3. This product is intended for INDOOR use only.
4. DO NOT sit, climb or lean on the table.
5. DO NOT drag the table when moving it. This will damage the legs.
Congratulations! You have now assembled your game table. Please note the Care
and Use instructions below to insure many years of trouble free use of your game
table.
6. DO NOT set drinks on the table.
7. The purchase of a table cover will both protect and help keep clean the
8.
Use a carpenters level to properly level the table using the leg levelers.
entire top of the table.
Description Qty.
H1
H2
H3
H4
T1
P1
P2
P3
P4
P5
P7
P8
Key # Part #
PRODUCT PARTS LIST FOR MODEL # AL1100W/F
AL1100SYH1
AL1100SYH2
AL1100SYH3
AL1100SYH4
AL1100SYT1
AL1100SYP1
AL1100SYP2
AL1100SYP3
AL1100SYP4
AL1100SYP5
AL1100SYP7
AL1100SYP8
8mm x 55mm Hex Head Bolt
M8 Flat Washer
M8 Lock Washer
3.5mm x 35mm Phillips Flat Head Screw
Socket Head Wrench
Main Cabinet
End Leg Apron
Right Leg
Left Leg
Leg Leveler
Top Panel of Lower Center Support Beam
Side Panel of Lower Center Support Beam
12
24
24
14
H5 AL1100SYH5 8mm x 40mm Hex Head Bolt 12
1
1
2
2
2
4
P6 AL1100SYP6 End Block 2
1
2
P9 AL1100SYP9 Triangle Leg Support Blocks 8
A1
A2
A4
AL1100SYA1
AL1100SYA2
AL1100SYA4
LED Striker
LED Puck
Felt Pad (may be attached )
2
1
A3 AL1100SYA3 Puck 2
2
A5 AL1100SYA5 AC/DC Adapter 1
C1
C2
C4
AL1100SYC1
AL1100SYC2
AL1100SYC4
LED Rail with Long Wire
LED Rail with Short Wire
Sensor with Short Wire
1
1
C3 AL1100SYC3 Control Box 1
1
C5 AL1100SYC5 Sensor with Long Wire 1
C6 AL1100SYC6 Blower with A/C Cord 1
C7 AL1100SYC7 Scorer 1
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
11
All Rights Reserved.
Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.
playfield with the air motor running.

© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
12
All Rights Reserved.
First Time Battery Installation:
Locate battery compartment for this product .
Use alkaline batteries for maximum performance .
Remove battery compartment cover .
Install new batteries only after reading the “ Battery Information NOTICE“ !
Replace compartment cover and secure cover.
Notice:
1. Remove and replace batteries when the electrical features of this product work slowly or are not
functional .
2. Do not mix old and new batteries .
3. Do not mix different types of batteries : Alkaline , Standard ( Carbon-Zinc) , or rechargeable
( Nickel-Cadmium batteries ) .
4. Use Alkaline Batteries for maximum performance .
5. Do not use damaged batteries .
6. Use only batteries of the same or equivalent type as recommended.
7. Install new batteries as per matching the battery polarity guide ( + & - , positive and negative ) inside
of the battery compartment . Correct battery polarity installation is critical as to not damage the internal
electrical components as well as insuring the correct functionality of the product .
8. Do not short circuit the battery terminals .
9. Always remove exhausted , leaking, weak , and batteries from long periods of nonuse from the
product . Battery leakage and corrosion can cause damage .
10. Check the battery terminals are clean and bright before installing new batteries.
11. Dispose of old batteries safely and per local battery disposal codes .
12. Do not dispose of batteries into a fire as they may explode or leak.
13. If removable rechargeable batteries are used , they are to be charged under adult supervision .
14. Rechargeable batteries are to removed from the product before they are charged .
15. If you use a battery charger, it should be examined regularly for damage to the cord , plug, enclosure,
and other parts. Do not use a damaged or malfunctioning charger until it is properly repaired.
16. Non rechargeable batteries must not be recharged .
17. Always remove batteries from this product for extended storage and or non-use .
18. Should this product cause , or be affected by, local electrical interference , move it away from other
electrical equipment . Reset ( switching off and back on again and or removing and reinserting the
batteries ) if necessary .
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries must be installed / replaced by an adult .

This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS
Product (hereinafter referred as the "Product").
This Product is warranted to the original owner, for a period of 90 days from the
original purchase.
ESCALADE SPORTS warrants to the original owner, this product to be free
from defects in material and workmanship when used for the intended purpose under normal use and
conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT,
UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS
PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL
AND WORKMANSHIP.
During the above 90 day warranty period, ESCALADE SPORTS shall
provide replacement components or replace with a comparable product at our choosing. If product is
defective under normal use and proper care, please contact our Customer Service Dept.
Other than shipping requirements no charge will be made for such replacement of in-warranty Products.
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.
WARRANTY DURATION:
WARRANTY COVERAGE:
WARRANTY REPLACEMENT:
LEGAL REMEDIES:
1-888-996-2729 / Customer Service Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Customer Service Dept.
Or E-mail us at:
[email protected]
ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
ABOVE 90 DAY PERIOD. ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF
USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,
EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
WARRANTY DISCLAIMERS:
90 DAY LIMITED WARRANTY
© 2021 Escalade Sports For Customer Service Call 1-888-996-2729
13
All Rights Reserved.