American Legend 72'' BROOKDALE AIR HOCKEY TABLE AL1005W/F User manual

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
1
All Rights Reserved.
1-888-996-2729
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Your Model Number ____________________
have your model number when inquiring about parts.
[email protected]
Please
Date Code ___________________________
2 - AL1005W- - SY
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Purchase Date ________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
AL1005W/F

Make sure you understand the following tips before you begin to assemble your hockey table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS 72’’ BROOKDALE AIR HOCKEY TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO ASSEMBLE THIS TABLE.
Socket Head Wrench (Included)
Furnitur e Polish and Cloth
ATTENTION:
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
2
All Rights Reserved.
24mm Open End Wrench or Crescent Wrench
Small Phillips Screw Driver to Install Batteries
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.

P1 - Main Cabinet
(1 pc)
H1 - 8mm x 130mm Hex Head Bolt
(4 pcs)
H2 - 8mm x 40mm
Hex Head Bolt
(12 pcs)
H3 - M8 Flat Washer
(16 pcs)
H4 - M8 Lock Washer
(16 pcs)
P2 - Leg A
(2 pcs)
P3 - Leg B
(2 pcs)
H6- M18 Flat Washer
(8 pcs)
（Not to Scale)
PARTS IDENTIFIER
(Not to Scale)
HARDWARE IDENTIFIER
(To Scale)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.
T1 - Socket Head Wrench
(1 pc)
H5 - M16 Hex Nut
(8 pcs)

P4 - Leg Cross Support
(2 pcs)
P5 - Turnbuckle Support
(2 pcs)
P6 - Leg Leveler
(4 pcs)
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
A1 - Striker
(2 pcs)
A2 - Puck
(2 pcs)
A3 - Felt Pad
(2 pcs)
ACCESSORIES IDENTIFIER
(Not to Scale)
NOTE: A3 Felt Pads may already
be attached to A1 Strikers
P7 - Metal Bracket
(2 pcs)
P8 - Leg Cross Support Hook
(2 pcs)
P9 - Cabinet Support Brace Hook
(2 pcs)
Note: Will install onto P4 Leg
Cross Supports
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation."
"CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."

PARTS REQUIRED
2pc - P2 Leg A
2pcs - P3 Leg B
12pcs - H2 Hex Head Bolt
12pcs - H3 M8 Flat Washer
12pcs - H4 M8 Lock Washer
STEP 1
STEP 2
Attach the P2 Leg A, P3 Leg B onto the P1 Main Cabinet using the H2 Hex Head Bolts, H4
Lock Washer, H3 Flat Washer as shown in FIGURE 2.
Attach the P9 Cabinet Support Brace Hook onto the P1 Main Cabinet
using the H5 Hex Nut and H6 M18 Flat Washer as shown in FIGURE 1.
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
FIGURE 1
PARTS REQUIRED
4pcs - H5 M16 Hex Nut
4pcs - H6 M18 Flat Washer2pcs - P9 Cabinet Support Brace Hook
1pc - P1 Main Cabinet
Do not tighten Bolts. Snug tighten only.
P9
P1
H6
H5
Flush
FIGURE 2
P2
P2
P3
P3
H2 H4 H3
H2
H2
H3
H3
H3
H2
H3
H2 H4 H3 H4
H4
H4
H2
H4
P1
Tighten H5 Hex Nut using the 24mm Open End Wrench or
Crescent Wrench.

PARTS REQUIRED
2pc - P7 Metal Bracket
2pc - P8 Leg Cross Support Hook
2pcs - P4 Leg Cross Support
4pcs - H6 M18 Flat Washer
4pcs - H5 M16 Hex Nut
Align the hole on the P7 Leg Bracket with the predrilled hole on the P4 Leg Cross Support.
Attach the P8 Leg Cross Support Hook onto the P4 Leg Cross Support with the H5 Hex Nut
and H6 Flat Washer as shown in FIGURE 3.
STEP 4
STEP 3
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
FIGURE 3
FIGURE 4
Attach the STEP 3 Assembly to the P2 Leg A and P3 Leg B with the H1 Hex Head Bolt, H3
M8 Flat Washer and H4 Lock Washer as shown in FIGURE 4.
Tighten all leg bolts now using the T1 Socket Head Wrench---tight.
P4
P4
P7 P8
H6
H5
H5
H6
PARTS REQUIRED
2pcs - P4 Leg Cross Support 4pcs - H1 Hex Head Bolt
4pcs - H3 M8 Flat Washer 4pcs - H4 M8 Lock Washer
H1
H3
H4
H1
H3
H4
P1
P4
P3
P3
P2
P2
NOTE: Cabinet Hook
to inside.
Tighten H5 Hex Nut using the 24mm Open End Wrench or Crescent Wrench.
Flush

Attach the P5 Turnbuckle Support onto the P8 Leg Cross Support Hook and P9 Cabinet Support
Brace Hook.
P4
P8
P5
P9
FIGURE 5
P6
Thread P6 Leg levelers to legs as shown in FIGURE 5.
STEP 5
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
PARTS REQUIRED
4pcs - P6 Leg Leveler
2pcs - P5 Turnbuckle Support
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
NOTE:
It will be necessary to screw out both ends of the
turnbuckle in order to attach them to the hooks.
NOTE:
Do not tigten the turnbuckles,
snug tighten only.

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
C3
C4
C5
C1
C2
ELECTRONIC CONNECTIONS
C5. Scorer
C6. Blower with A/C Cord
C3. Control Box
C4. Battery Box
C1. Sensor with
Short Wire
C2.Sensor with
Long Wire
NOTE:
ON/OFF switch is attached to the air
fan motor cord. Be sure to always turn
fan motor off when play is completed.
IMPORTANT:
Plug into wall outlet.
Do not allow cord to be a trip hazard.

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
LED SCORING OPERATING

CARE AND USE OF YOUR TABLE
1. Use spray furniture polish to clean all exterior surfaces of your table and on the
2.
3. This product is intended for INDOOR use only.
4. DO NOT sit, climb or lean on the table.
5. DO NOT drag the table when moving it. This will damage the legs.
Congratulations! You have now assembled your table. Please note the Care
and Use instructions below to insure many years of trouble free use of your game
table.
6. DO NOT set drinks on the table.
7. The purchase of a table cover will both protect and help keep clean the
8.
Use a carpenters level to properly level the table using the leg levelers.
entire top of the table.
Description Qty.
H1
H2
H3
H4
T1
P1
P2
P3
P4
P5
P7
P8
P9
Key # Part #
PRODUCT PARTS LIST FOR MODEL # AL1005W/F
AL1005STXH1
AL1005STXH2
AL1005STXH3
AL1005STXH4
AL1005STXT1
AL1005STXP1
AL1005STXP2
AL1005STXP3
AL1005STXP4
AL1005STXP5
AL1005STXP7
AL1005STXP8
AL1005STXP9
8mm x 130mm Hex Head Bolt
8mm x 40mm Hex Head Bolt
M8 Flat Washer
M8 Lock Washer
Socket Head Wrench
Main Cabinet
Leg A
Leg B
Leg Cross Support
Turnbuckle Support
Metal Bracket
Leg Cross Support Hook
Cabinet Support Brace Hook
4
12
16
16
H5 AL1005STXH5 M16 Hex Nut 8
H6 AL1005STXH6 M18 Flat Washer 8
1
1
2
2
2
2
P6 AL1005STXP6 Leg Leveler 4
2
2
2
A1
A2
A3
AL1005STXA1
AL1005STXA2
AL1005STXA3
Striker
Puck
Felt Pad (may be attached )
K1
M1
AL1005STXK1
AL1005STXM1
Hardware Kit
Owner's Manual
2
2
2
C1 AL1005STXC1 Sensor with Short Wire 1
C2 AL1005STXC2 Sensor with Long Wire 1
C3 AL1005STXC3 Control Box 1
C4 AL1005STXC4 Battery Box 1
C5 AL1005STXC5 Scorer 1
C6 AL1005STXC6 Blower with A/C Cord 1
1
1
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.
playfield with the air motor running.

© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
11
All Rights Reserved.
First Time Battery Installation:
Locate battery compartment for this product .
Use alkaline batteries for maximum performance .
Using a small Phillips head screwdriver – loosen and remove the battery compartment cover
screw(s).
Remove battery compartment cover .
Install new batteries only after reading the “ Battery Information NOTICE“ !
Replace compartment cover and secure cover with the cover screw . Do not over tighten and
strip out the screw .
Notice:
1. Remove and replace batteries when the electrical features of this product work slowly or are not
functional .
2. Do not mix old and new batteries .
3. Do not mix different types of batteries : Alkaline , Standard ( Carbon-Zinc) , or rechargeable
( Nickel-Cadmium batteries ) .
4. Use Alkaline Batteries for maximum performance .
5. Do not use damaged batteries .
6. Use only batteries of the same or equivalent type as recommended.
7. Install new batteries as per matching the battery polarity guide ( + & - , positive and negative ) inside
of the battery compartment . Correct battery polarity installation is critical as to not damage the internal
electrical components as well as insuring the correct functionality of the product .
8. Do not short circuit the battery terminals .
9. Always remove exhausted , leaking, weak , and batteries from long periods of nonuse from the
product . Battery leakage and corrosion can cause damage .
10. Check the battery terminals are clean and bright before installing new batteries.
11. Dispose of old batteries safely and per local battery disposal codes .
12. Do not dispose of batteries into a fire as they may explode or leak.
13. If removable rechargeable batteries are used , they are to be charged under adult supervision .
14. Rechargeable batteries are to removed from the product before they are charged .
15. If you use a battery charger, it should be examined regularly for damage to the cord , plug, enclosure,
and other parts. Do not use a damaged or malfunctioning charger until it is properly repaired.
16. Non rechargeable batteries must not be recharged .
17. Always remove batteries from this product for extended storage and or non-use .
18. Should this product cause , or be affected by, local electrical interference , move it away from other
electrical equipment . Reset ( switching off and back on again and or removing and reinserting the
batteries ) if necessary .
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries must be installed / replaced by an adult .

This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS
Product (hereinafter referred as the "Product").
This Product is warranted to the original owner, for a period of 90 days from the
original purchase.
ESCALADE SPORTS warrants to the original owner, this product to be free
from defects in material and workmanship when used for the intended purpose under normal use and
conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT,
UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS
PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL
AND WORKMANSHIP.
During the above 90 day warranty period, ESCALADE SPORTS shall
provide replacement components or replace with a comparable product at our choosing. If product is
defective under normal use and proper care, please contact our Customer Service Dept.
Other than shipping requirements no charge will be made for such replacement of in-warranty Products.
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.
WARRANTY DURATION:
WARRANTY COVERAGE:
WARRANTY REPLACEMENT:
LEGAL REMEDIES:
1-888-996-2729 / Customer Service Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Customer Service Dept.
Or E-mail us at:
[email protected]
ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
ABOVE 90 DAY PERIOD. ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF
USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,
EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
WARRANTY DISCLAIMERS:
90 DAY LIMITED WARRANTY
© 2020 Escalade Sports For Customer Service Call 1-888-996-2729
12
All Rights Reserved.