American Legend FT250DS User manual

888-996-2729-1
1353-378-668-1:XAF
moc.stropsedalacse@gameroom
ytilauqtsehgihehtfoerastcudorpruotahterusneotevirtseW
fi,revewoH.strapgnissimrostcefedgnirutcafunamfoe
erfdna
,tcudorpwenruoyhtiwsmelborpynaevahuoy
EROTSEHTOTTINRUTERTONOD ,
:@eerfllotsutcatnocesaelp
:otetirwrO
stropSedalacsE
tnemtrapeDecivreSremotsuC
988xoB.O.P
60774NI,ellivsnavE
date code (if,rebmunledomruoyedivorpesaelpstropSedalacsEgnitcatnocnehW
erasrebmunesehT.traptnemecalp
eragnitseuqerfirebmuntrapdna,)elbacilppa
.launamsrenwosihtnidna,gnigakcap,tcudorpehtnodetacol
rebmuNledoMruoY
.straptuobagniriuqninehwdate coderuoyevahesaelP
FT250DS
888-996-2729-1llaCecivreSremotsuCroF1stropSedalacsE1402©
Date Code: 2 - FT250DS - - MW
All Rights Reserved
Purchase Date:
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your soccer table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS FT250DS SOCCER TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS SOCCER TABLE
TOGETHER.
A2 & A3 - Allen Wrench(Included)
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
© 2014 Escalade Sports For Customer Service Call 1-888-996-2729
Phillips Screwdriver
Furniture Polish and Cloth
2
All Rights Reserved.

P1 = 2 pcs
RPFT250DS-P1
P2 = 2 pcs
RPFT250DS-P2
P3 = 1 pc
RPFT250DS-P3
P4A = 2 pcs
RPFT250DS-P4A
P4B = 2 pcs
RPFT250DS-P4B
P23 = 2 pcs
RPFT250DS-P23
P6 = 8 pcs
RPFT250DS-P6
P5 = 3 pcs
RPFT250DS-P5
P7 = 8 pcs
RPFT250DS-P7
Side Apron End Apron Playfield Left Leg
Right Leg
Leg Cross Tube
Rod Handle
Playfield Support Brace Rod End Cap
P13 = 2 pcs
RPFT250DS-P13
P14 = 4 pcs
RPFT250DS-P14
P15 = 2 pcs
RPFT250DS-P15
5 Player Rod 3 Player Rod 2 Player Rod
P16 = 16 pcs
RPFT250DS-P16
Rod Bumper
P17 = 32 pcs
RPFT250DS-P17
P18 = 13 pcs
RPFT250DS-P18
P19 = 13 pcs
RPFT250DS-P19
Rod Washer Red Player Ivory Player
P21 = 2 pcs
RPFT250DS-P21
Cup Holder
NOTE: Parts are
packed inside
of Leg.
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under
3 yrs.
NOTE: Parts are
packed inside
of Leg.
NOTE: P5 AND P23 PARTS
ARE PACKED INSIDE OF LEGS.
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.
P8 = 2 pcs
RPFT250DS-P8
Outside Ball
Entry Cup
P9 = 2 pcs
RPFT250DS-P9
Ball Catcher
P10 = 2 pcs
RPFT250DS-P10
Goal Box
P11 = 2 pcs
RPFT250DS-P11
Ball Return Tube
P12 = 2 pcs
RPFT250DS-P12
Scorer
P22 = 4 pcs
RPFT250DS-P22
Leg Leveler

H1 = 3 pcs
RPFT250DS-H1
H6 = 26 pcs
RPFT250DS-H6
H3 = 6 pcs
RPFT250DS-H3
H4 = 4 pcs
RPFT250DS-H4
H5 = 24 pcs
RPFT250DS-H5
RPFT250DS-H2
Playfield Support Rod
3.5mm x 12mm
Allen Head Nut for 3.5mm x 44mm
A1 = 2 pcs
RPFT250DS-A1
A2 = 2 pcs
RPFT250DS-A2
A3 = 1 pc
RPFT250DS-A3
Soccer Ball 6mm Allen Wrench 4mm Allen Wrench
Phillips Round
Playfield Support Rod Phillips Flat
Head Screw
Head Screw
7.5mm x 44mm
Allen Head Bolt
H2 = 24 pcs
8.5mm x 19mm
Flat Washer
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under
3 yrs.
NOTE: Parts are
packed inside
of Leg.
NOTE: H1 PARTS ARE
PACKED INSIDE OF LEGS.
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
H7 = 8 pcs
3.5mm x 25mm
Phillips Round
Head Screw
RPFT250DS-H7
H8 = 26 pcs
RPFT250DS-H8
4mm x 28mm
Phillips Round
Head Bolt
H9 = 26 pcs
RPFT250DS-H9
4mm Nut
H10 = 8 pcs
RPFT250DS-H10
4.8mm x 19mm
Phillips Flat
Head Bolt

PARTS REQUIRED:
FIGURE 1
3 pcs - H1 Playfield Support Rod
6 pcs - H3 Playfield Support Rod Nut
2 pcs - P1 Side Apron
1 pc - P3 Playfield
3 pcs - P5 Playfield Support Brace
2 pcs - A2 6mm Allen Wrench
STEP 1:
Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the box top
to protect the parts during assembly.
With the help of another adult, carefully assemble P1 Side Aprons, P3 Playfield and P5 Playfield Support Braces
using H1 Support Rods, H3 Support Rod Nuts with A2 Allen Wrenches as shown in FIGURE 1.
Do not tighten H3 Support Rod Nuts at this time.
Green playfield
on bottom side
H3
H3
H3
H1
H1
H1
P1
P1
P3
P5
P5
P5
H3
H3
H3
A2
A2
NOTE: This assembly
is upside down.
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.

PARTS REQUIRED:
FIGURE 2
8 pcs - H2 Flat Washer 2 pcs - P2 End Apron
8 pcs - H5 Allen Head Bolt 2 pcs - A2 6mm Allen Wrench
8 pcs - H7 Phillips Round Head Screw 1 pc - A3 4mm Allen Wrench
STEP 2:
Attach P2 End Aprons to previous assembly STEP 1 using H5 Allen Head Bolts with H2 Flat Washers as shown in
FIGURE 2. Do not tighten H5 Allen Head Bolts on this time.
Please make sure P3 Playfield is flush with both ends of P2 End Apron, tighten H5 Allen Head Bolts using A3 Allen
Wrench on this time.
Secure P3 Playfield to P2 End Apron using pre-drilled holes with H7 Screws as shown in FIGURE 2.
IMPORTANT NOTE: All screws must be screwed STRAIGHT down. Tighten, but do not strip out H7 Screws.
Using A2 Allen Wrenches to tighten H3 Support Rod Nuts as shown in FIGURE 2.
P3
IMPORTANT NOTE:
Bottom of P1 Side Aprons and P2 End Aprons
must be flush with each other before tightening
H5 Allen Head Bolts.
IMPORTANT NOTE:
P3 Playfield must be flush with each
end of P2 End Aprons before
tightening H5 Allen Head Bolts.
P2
H7
H3
A2
H5
H2
H5
H2
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
P2
A3

PARTS REQUIRED:
12 pcs - H6 Phillips Round Head Screw
2 pcs - P9 Ball Catcher
2 pcs - P10 Goal Box
2 pcs - P11 Ball Return Tube
STEP 3:
Center P10 Goal Box over the opening in the P2 End Apron and attach using pre-drilled pilot holes with H6 Screws as
shown in FIGURE 3. Tighten, but do not strip out H6 Screws.
Center P9 Ball Catcher over the opening in the P1 Side Apron and attach using pre-drilled pilot holes with H6 Screws
as shown in FIGURE 3. Tighten, but do not strip out H6 Screws.
Make sure the round opening for P11 Ball Return Tube is towards the floor (when table is turned upright).
Repeat for both ends of the table.
Attach P11 Ball Return Tubes between P9 Ball Catcher and P10 Goal Box as shown in FIGURE 3.
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
FIGURE 3
NOTE: Make sure the round opening
for the ball return tube is towards the
floor (when table is turned upright)
P1
P2
P10 P9
P11
H6

PARTS REQUIRED:
FIGURE 4
16 pcs - H2 Flat Washer 4 pcs - P22 Leg Leveler
16 pcs - H5 Allen Head Bolt 2 pcs - P23 Leg Cross Tube
2 pcs - P4A Left Leg 1 pc - A3 4mm Allen Wrench
2 pcs - P4B Right Leg
STEP 4:
Install P4A Left Legs and P4B Right Legs with P23 Leg Cross
Tubes using H5 Allen Head Bolts with H2 Flat Washers as
shown in FIGURE 4. Use A3 Allen Wrench to tighten all H5 Bolts.
Thread P22 Leg Leveler onto each P4A and P4B Leg as shown
in FIGURE 4.
H5
H2
H5
H2
P4B
P4A
P4A
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND
SET IT ON ITS LEGS.
IMPORTANT NOTE:
Install P23 Leg Cross Tubes
before tightening H5 Leg Bolts.
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
P4B
P23
P23
P22

STEP 5:
Slide P13 5 Player Rod, P14 3 Player Rods and P15 2 Player
Rod through Rod Bushings of one P1 Side Apron as shown
in FIGURE 5. IMPORTANT NOTE: Please note the
location of the hole that is near one end of each
rod. This is the handle end of the rod.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 5.
Place P18 Red Players ( ) on rod as shown in
FIGURE 5.
IMPORTANT NOTE: The goalie should be at
your left and your team (player face) facing to
the right. Looking ahead to FIGURE 6, DETAIL A
and FIGURE 9 - will help you with correct player
and rod handle assembly onto rods.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 5.FIGURE 5
Hole / Handle End
Rod Bushing
Note: Rod Bushings are
already attached onto
each P1 Side Apron.
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
LEFT RIGHT
P1
Side Apron
P14
3 Player Rod
P14
3 Player Rod
P13
5 Player Rod
P15
2 Player Rod
= P16 Rod Bumper
= P17 Rod Washer
= P18 Red Player
P16
P17
P18
P17
P16
P17
P17
STEP 6:
Align P18 Red Player to each player hole and attach
using H8 Bolts with H9 Lock Nut as shown in
FIGURE 6 and DETAIL A.
Attach P7 Rod End Caps to the rod as shown in
FIGURE 6.
Slide P6 Rod Handle onto each rod end with the
small hole shown in FIGURE 6.
Attach P6 Rod Handle using H10 Bolts as shown
in FIGURE 6.
P7
Rod End Cap
P7
Rod End Cap
P6
Rod Handle
P6
Rod Handle
DETAIL A
Rod
H8
H9
P18
FIGURE 6
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
Note:
Small Hole
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED:
13 pcs - H8 Phillips Round Head Bolt 4 pcs - P7 Rod End Cap 8 pcs - P16 Rod Bumper
13 pcs - H9 Nut 1 pc - P13 5 Player Rod 16 pcs - P17 Rod Washer
4 pcs - H10 Phillips Flat Head Bolt 2 pcs - P14 3 Player Rod 13 pcs - P18 Red Player
4 pcs - P6 Rod Handle 1 pc - P15 2 Player Rod
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P6 Handles.
H10

STEP 7:
Slide P13 5 Player Rod, P14 3 Player Rods and P15
2 Player Rod through Rod Bushings of one P1 Side
Apron as shown in FIGURE 7.
IMPORTANT NOTE: Please note the location of
the hole that is near one end of each rod.
This is the handle end of the rod.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 7.
Place P19 Ivory Players ( ) on rod as shown in
FIGURE 7.
IMPORTANT NOTE: The goalie should be at
your left and your team (player face) facing to
the right. Looking ahead to FIGURE 8, DETAIL B
and FIGURE 9 - will help you with correct player
and rod handle assembly onto rods.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 7.
= P16 Rod Bumper
= P17 Rod Washer
= P19 Ivory Player
STEP 8:
Align P19 Ivory Player to each player hole and attach using
H8 Bolts with H9 Lock Nut as shown in FIGURE 8 and
DETAIL B.
Attach P7 Rod End Caps to the rod as shown in
FIGURE 8.
Slide P6 Rod Handle onto each rod end with the
small hole shown in FIGURE 8.
Attach P6 Rod Handle using H10 Bolts as shown
in FIGURE 8.
Rod Bushing
Note: Rod Bushings are
already attached onto
each P1 Side Apron.
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
RIGHT LEFT
FIGURE 7
Hole / Handle End
P15
2 Player Rod
P13
5 Player Rod
P14
3 Player Rod
P14
3 Player Rod
DETAIL B
P19
H8
H9
Rod
P6
Rod Handle
P6
Rod Handle
P7
Rod End Cap
FIGURE 8
Note:
Small
Hole
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
PARTS REQUIRED:
H10
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P6 Handles.
13 pcs - H8 Phillips Round Head Bolt 4 pcs - P7 Rod End Cap 8 pcs - P16 Rod Bumper
13 pcs - H9 Nut 1 pc - P13 5 Player Rod 16 pcs - P17 Rod Washer
4 pcs - H10 Phillips Flat Head Bolt 2 pcs - P14 3 Player Rod 13 pcs - P19 Ivory Player
4 pcs - P6 Rod Handle 1 pc - P15 2 Player Rod

PARTS REQUIRED:
4 pcs - H4 Phillips Flat Head Screw
14 pcs - H6 Phillips Round Head Screw
2 pcs - P8 Outside Ball Entry Cup
2 pcs - P12 Scorer
2 pcs - P21 Cup Holder
©2014 Escalade Sports For Customer Service Call 1-888-996-2729
11
All Rights Reserved.
STEP 9:
Install P12 Scorers using pre-drilled holes with H4 Screws as shown in FIGURE 9.
Install P8 Ball Entry Cups using pre-drilled holes with H6 Screws as shown in FIGURE 9 and DETAIL C.
Install P21 Cup Holders using pre-drilled holes with H6 Screws as shown in FIGURE 9.
Tighten, but do not strip out H4 and H6 Screws.
FIGURE 9
P8
H6
P1
DETAIL C
P12
H4
H4
P12
P21
H6

©2014 Escalade Sports For Customer Service Call 1-888-996-2729
All Rights Reserved.
12
Congratulations! You have now assembled your soccer table. Please note the Care and Use
instructions below to insure many years of trouble free use of your soccer table.
CARE AND USE OF YOUR SOCCER TABLE
1. Apply spray furniture polish to a clean cloth and wipe down the rods to make them slide
easier in the rod bushings.
2. Use spray furniture polish to clean all exterior surfaces of your soccer table.
3. Use a carpenters level to properly level table using the leg levelers.
4. This product is intended for INDOOR use only.
5. DO NOT sit, climb or lean on the table.
6. DO NOT drag the table when moving it. This will damage the legs.
7. DO NOT set drinks on the table.
Description Qty.
P1
P2
P3
P4A
P4B
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P21
P22
P23
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
A1
A2
A3
Key # Part #
PRODUCT PARTS LIST FOR MODEL # FT250DS
RPFT250DS-P1
RPFT250DS-P2
RPFT250DS-P3
RPFT250DS-P4A
RPFT250DS-P4B
RPFT250DS-P5
RPFT250DS-P6
RPFT250DS-P7
RPFT250DS-P8
RPFT250DS-P9
RPFT250DS-P10
RPFT250DS-P11
RPFT250DS-P12
RPFT250DS-P13
RPFT250DS-P14
RPFT250DS-P15
RPFT250DS-P16
RPFT250DS-P17
RPFT250DS-P18
RPFT250DS-P19
RPFT250DS-P21
RPFT250DS-P22
RPFT250DS-P23
RPFT250DS-H1
RPFT250DS-H2
RPFT250DS-H3
RPFT250DS-H4
RPFT250DS-H5
RPFT250DS-H6
RPFT250DS-H7
RPFT250DS-H8
RPFT250DS-H9
RPFT250DS-H10
RPFT250DS-A1
RPFT250DS-A2
RPFT250DS-A3
Side Apron
End Apron
Playfield
Left Leg
Right Leg
Playfield Support Brace
Rod Handle
Rod End Cap
Outside Ball Entry Cup
Ball Catcher
Goal Box
Ball Return Tube
Scorer
5 Player Rod
3 Player Rod
2 Player Rod
Rod Bumper
Rod Washer
Red Player
Ivory Player
Cup Holder
Leg Leveler
Leg Cross Tube
Playfield Support Rod
8.5mm x 19mm Flat Washer
Allen Head Nut for Playfield Support Rod
3.5mm x 44mm Phillips Flat Head Screw
7.5mm x 44mm Allen Head Bolt
3.5mm x 12mm Phillips Round Head Screw
3.5mm x 25mm Phillips Round Head Screw
4mm x 28mm Phillips Round Head Bolt
4mm Nut
4.8mm x 19mm Phillips Flat Head Bolt
Soccer Ball
6mm Allen Wrench
4mm Allen Wrench
2
2
1
2
2
3
8
8
2
2
2
2
2
2
4
2
16
32
13
13
2
4
2
3
24
6
4
24
26
8
26
26
8
2
2
1

©2014 Escalade Sports For Customer Service Call 1-888-996-2729
13
All Rights Reserved.
This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS
Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a pe-
riod of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser
that any Product of its manufacture is free from defects in material and workmanship when used
for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PROD-
UCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMAN-
SHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS
shall repair or replace with a comparable model, and Product, or component thereof, which may
prove defective under normal use and proper care, and which our examination shall disclose to
our satisfaction to be thus defective, please contact our Warranty Dept.
1-888-996-2729 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at:
[email protected]
Other than shipping requirements no charge will be made for such repair or replacement of in-
warranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for
value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM-
ITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES IN-
CURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or
incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
90 DAY LIMITED WARRANTY