Ameriwood HOME 6972015COM User manual

6972015COM
Dresser
B346972015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 2
ESTIMATED ASSEMBLY TIME: 2 HOURS

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Left Panel
32399015010
Right Panel
32399015020
Bottom
36972015050
Top
32399015040
(x6)
Drawer Back
39991167059790B
(x6)
Drawer Front
35259015071
(x6)
Drawer Bottom
39991341060810D
Back Panel
K23990000
This part is paperboard
construction. It is not
made from wood, but is
required for the
assembly of your unit.
(x12)
Drawer Side
39991167346200C
Partition
32399015030
ABC
D
E
H
DWR
SIDE
DWR
BACK
G
I
Kick
35259015060
F

5
ameriwoodhome.com
Board Identification
Not actual size
E
DWR
SIDE
DWR
BACK
This part is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.
DWR
SIDE
A
B
C
D
G
H
I
F

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
34
2
1
6
8
5
7
13
(x10)
#A22610
cam bolt
(x10)
#A22620
cam lock
(x5)
#A21660
wood dowel
(x60)
#A11080
7/16" flat screw
(x68)
#A12120
7/16" pan screw
(x34)
#A21110
nail
(x24)
#A21970
drive fastener
(x12)
#A12700
7/8" pan screw
left cabinet member
right cabinet member
left drawer member
right drawer member
(x6)
#A56740
drawer slide pkg.
(x12)
#A54520
drawer bracket
(x6)
#A50695
handle
(x1)
#A84050
safety bracket kit
(x6)
#A54900
drawer brace
(x2)
#A23030
confirmat screw
9
(x1)
#A43105
plastic foot
15
(x4)
#A53510
angle bracket
10
11a
11b
11c
11d
12
14a 14b 14c
14d
16

7
ameriwoodhome.com
STEP1
1
1
12b
12a
Do not fully tighten this screw.
finished edge
(x6)
#A22610 (x1)
#A84050
1
1
1
1
1
D

8
ameriwoodhome.com
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
3
2
23
(x2)
#A21660
(x4)
#A22620
(x1)
#A43105
3
13
You may need to tap the plastic foot (13) lightly
with a hammer to fully seat onto bottom (E).
10
5
(x8)
#A12120
(x4)
#A53510
5
5
10
13
E
F
2
2

9
ameriwoodhome.com
STEP3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
4
2
1
(x2)
#A22610
(x2)
#A22620
(x1)
#A21660
(x9)
#A11080
(x3)
#A56740
left cabinet member
mark with a "L"
finished edge
1
2
3
4
2
1
A
11a
11a
11a
11a

10
ameriwoodhome.com
STEP4
3
2
1
1
24
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
#A22610
(x2)
#A22620
(x1)
#A21660
(x9)
#A11080
(x3)
#A56740
right cabinet member
mark with a "R"
finished edge
4
1
2
B
11b
11b
11b
11b

11
ameriwoodhome.com
STEP5
3
4
2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
#A22620
(x1)
#A21660
(x18)
#A11080
(x3)
#A56740
left cabinet member
mark with a "L"
right cabinet member
mark with a "R"
2
3
2
4
4
finished edge
C
C
11a
11a
11a
11a
11b
11b
11b
11b
11b
11a

12
ameriwoodhome.com
STEP6
finished edge
9
(x2)
#A23030
9
C
E

13
ameriwoodhome.com
STEP7
UNLOCKLOCK
EC
A
B
Note: All finished edges will face up.

14
ameriwoodhome.com
STEP8
UNLOCKLOCK
finished edge
A
C
B
D

15
ameriwoodhome.com
STEP9
6
(x34)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully turn your unit over on its front side. Position the back
panel as shown. Make sure the unit is square. Flush the bottom edge of the back panel with bottom
edge of bottom (E) and align outer edges equally and nail straight through into back edges as
shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
6
Flush bottom edge of back
panel with bottom edge of
bottom (E).
Notch in back panel.
E
A
I

16
ameriwoodhome.com
STEP10
5
Line up the drawer bracket (12) with the holes in the drawer sides as shown and attach
with screws (5).
(x24)
#A12120
(x12)
#A54520
bracket orientation bracket orientation
x6
x6
5
55
5
DWR
SIDE DWR
SIDE
12
12 12

17
ameriwoodhome.com
STEP11
5
5
Be sure to center the groove in the drawer sides with the groove in the drawer front (G).
(x24)
#A12120
5
Please note, you will repeat this step for
each of the 6 drawers.
x6
DWR
SIDE
DWR
SIDE
G

18
ameriwoodhome.com
STEP12
(x24)
#A21970
7
finished surface
Note: You will need to tap the drive fastener (7) with a hammer to securely fasten.
x6
DWR
SIDE
G
DWR
SIDE
DWR
BACK
H
7
7
7
7

19
ameriwoodhome.com
STEP13
8
(x12)
#A12700
(x24)
#A11080 (x6)
#A56740
right drawer member
left drawer member
(x6)
#A50695
4
x6
Attach the slides first and then the handle.
4
4
4
4
8
8
DWR
SIDE
G
DWR
SIDE
DWR
BACK
15
15
11c
11c
11d
11d

20
ameriwoodhome.com
STEP14
5
(x12)
#A12120
Turn each drawer over. Using screws (5), attach the drawer brace (16) as shown.
(x6)
#A54900
x6
5
5
16
16