Ameriwood HOME Remington 6463872COM User manual

B346463872COM00
Do Not Return This Product!
Contact our customer service team for help rst
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
–Unit can p over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
Remington Bookcase with Doors
6463872COM
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Easy Tough
Assembly Diculty Meter
Follow Ameriwood Home
042019PK

Helpful Hints
Contact Us!
Do NOT return this product!
Contact our friendly customer service team rst for help
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 30 MINUTES
Visit ameriwoodhome.com
Assembly Tips
2
ameriwoodhome.com
- Open your item in the area you plan to keep it for less heavy liing
- Idenfy, sort and count the parts before aempng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture

Before You Start
Cam Lock Fastening System
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be usedthroughoutthe assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
Quick
Tip
Assembly
1
3
2
4

Board Idencaon
Notactual size
4
ameriwoodhome.com
x1
T6463872010PK
TOP PANEL
x1
T6463872020PK
BOTTOM PANEL
x1
T6463872030PK
TOP HUTCH
x2
T6463872040PK
LOWER SIDE PANEL
x2
T6463872050PK
UPPER SIDE PANEL
x1
T6463872080PK
LOWER BACK PANEL
x1
T6463872090PK
UPPER BACK PANEL
x2
T6463872060PK
DOOR
x3
T6463872070PK
SHELF
1
5
8 9
6
7
2 3
4

Part List
Actual Size
5
ameriwoodhome.com
x8
TPK0001
Cam Bolt
x8
TPK0003
Cam Lock 15-9
x16
TPK0004
DOWEL 8 X 30
x8
TPK0009
CBS 4 x 50
x16
TPK0010
SCREW PH 4 X 30
x34
TPK0015
NAIL
x12
TPK0006
SHELF HOLDER
x24
TPK0007
CBS 3.5 x 16
x4
TPK3005
HANDLE SCREW
x2
TPK0016
MAGNET SET

Part List
NotActual Size
6
ameriwoodhome.com
x4
TPK2002
LEG BRACKET
x1
TPK2004
ANTI TIPPING KIT
x4
TPK2001
LEG
x2
TPK3004
HANDLE
x4
TPK4001
DOOR HINGES

7
ameriwoodhome.com
Step 1
4
Properly insert Cam Lock and dowel.
5
x2
x2
x8
TPK0003
x16
TPK0004

8
ameriwoodhome.com
Step 2
4
4
2
First, please spread so cloth on the oor to prevent damage on panels.
Aach lower side panel to the boom panel, x it using screws.
Edge without prole
facing upward.
Please make sure
these markings facing
downward
oor
x4
TPK0009

9
ameriwoodhome.com
Step 3
insert screws at hole with counterbore
x4
TPK0009
Carefully aach top panel, and x it using screw.
Edge without prole
facing upward.
4
1

10
ameriwoodhome.com
x8
TPK0001
Insert Cam Bolt at the smallest holes.
41
3
Step 4

11
ameriwoodhome.com
Step 5
5
5
Aach upper side panel to the top panel. Please
ghten the Cam Lock.
1

12
ameriwoodhome.com
Step 6
15
5
3
Properly aach the top hutch and fully
ghten all Cam Lock.
Edge without prole
facing upward.
Because this panel is shorter,
please reuse styrofoam from
packaging box to protect the
edge.

13
ameriwoodhome.com
Step 7
3
8
9
x34
TPK0015
Before aach the steel nail, please posion the back panel properly. Please ensure
the square dimension rst, then x it using steel nails.

14
ameriwoodhome.com
Step 8
x1
TPK2004
Aach An-Tipping kit as shown. Do not fully ghten yet in this step.
3
9

15
ameriwoodhome.com
Step 9
2
x16
TPK0010
x4
TPK2002
Shorter edge higher edge
To aach these plasc brackets, please be alert,
this bracket designed with slanng face. Please
carefully align the shorter edge to outside corner.
IMPORTANT! Shorter edge
must align to outside corner.

16
ameriwoodhome.com
Step 10
2
x4
TPK2001
Please remove plasc cap on the leg rst. Carefully
align bolt to the bracket, turning the leg clockwise to
ghten the leg.

17
ameriwoodhome.com
x8
TPK0007
x4
TPK4001
Step 11
Aach door hinges to the door panel. Align carefully
the hinges and make sure side faces parallel with
door edge. Fully ghten the screws.
6x2

18
ameriwoodhome.com
Step 12
6
6
x16
TPK0007
Insert door to the side panel as shown below.
First, insert screw to the side panel.
Loosen this screw to move door front or back, fully ghten
this screw aer nish make adjustment.
To adjust outside level, turn this screw,
clockwise to move in, counter clockwise
to move out.

19
ameriwoodhome.com
x2
TPK0016
Locate four holes underneath of table top. Aach this
magnet as shown using hammer.
Aach this steel plate on the door.
Step 13

20
ameriwoodhome.com
x12
TPK0006
Step 14
6
6
x4
TPK3005
x2
TPK3004
This cabinet designed with 3 levels of
adjustment for shelf. Insert shelf holder
in desired level of holes.
Aach handles as shown in illustraon.